English
Curriculum (Switzerland)

Mathematics — Grade 7

Grade 7 (Switzerland) — Ratios and proportions, common fractions

Imaginesis: printable math worksheets for this grade (Switzerland) — word problems with hints, answer keys and step-by-step solutions as PDF, also as a test in two to four groups (A–D).

with answer keys · step-by-step solutions · hints · tests in groups A–D

Free: sample worksheets and the editor demo without an account.

Topics in this grade

Mathematics in Grade 7 (secondary): rational numbers, terms and equations, percentages, angles, triangles, areas and volumes. For each topic there are sample exercises for printable worksheets with solutions.

The students understand and use arithmetic terms and symbols. They read and write numbers

Numbers to the left and right of zero on the number line

Your child learns to read whole positive and negative numbers on the number line, to find the opposite of a number, and to determine the distance from zero.

10 task typesCreate a worksheet →

Description and task types

Your child can place positive and negative numbers on the number line. It reads off which number lies at a given point, and recognises that, for example, -7 is less than -3. The curriculum objectives speak in general terms of positive and negative rational numbers on the number line. They do not name a specific number range for Year 7. The tasks in this grade work with whole numbers.

A typical mistake: your child compares negative numbers as if they were positive numbers. Then it thinks -7 is greater than -3, because 7 is greater than 3. On the number line, however, -7 lies further to the left, so it is smaller. Confusion also arises with the distance from zero. The distance of -7 from zero is 7, but the position on the number line determines the order. Your child should be able to tell these two apart.

Typical tasks on the worksheets are:

  • Reading a whole number on the number line: The point is marked, and the number is named.
  • Number line with steps of two: The tick marks are counted in steps of two, and your child reads the number at a point.
  • Stating the opposite number: For a given number, the number with the opposite sign is found, for example 4 gives -4.
  • Distance from zero: Your child decides whether a statement is true or false.
  • Reflection or mirror point on the number line: A point is reflected across zero.
  • Midpoint, or the number exactly in the middle: Your child finds the number that lies exactly in the middle between two given numbers.

MA.1.A.1.i: understand and use the terms term, variable, unknown, raised to, power, power of ten, sign, positive numbers, negative numbers, (square) root. Extension: understand and use the terms base, exponent. can use the symbols √, ≤, ≥ and use calculators accordingly. can read and write numbers up to 1 billion.
MA.1.A.2.j: can order positive and negative rational numbers on the number line.

Task types: Distance from zero on a number line · Distance from zero: find the mistake · Distance from zero: true or false · Find the opposite number · Read an integer on a number line · Midpoint on the number line: choose the number · Number line in steps of 2: read the integer · Reflection on the number line: choose the number · The integer halfway between two integers · Reflect a point on the number line

Calculating Powers of Fractions and Integers

The child learns to calculate powers such as (−3)² or (2/3)³, with whole numbers and with fractions, including those with a negative sign.

9 task typesCreate a worksheet →

Description and task types

The child calculates powers whose base is a rational number (an integer, a fraction, also negative) and whose exponent is a natural number. The curriculum describes this skill for the whole grade and gives examples such as 4³ · 4³ = 4096 or the calculator for powers. For Grade 7, the tasks that this area prints count.

A typical mistake involves the sign and fractions. For −3², people often calculate (−3)², although the exponent applies only to the 3, so −(3²) = −9. With fractions, the exponent is sometimes applied only to the numerator: (2/3)² then gives 4/3 instead of 4/9. Another common misconception is reading a power as multiplication by the exponent: 3² is then calculated as 6 instead of 3 · 3 = 9.

Typical tasks in Grade 7 are:

  • Calculating the power of an integer, for example (−2)⁴ or 5³.
  • Calculating the power of a fraction, for example (3/4)² or (−2/5)³.
  • Choosing the value of a power from answer options: From several given options, the correct one is selected. The wrong answers often correspond exactly to the mistakes mentioned above, so that the child can check their calculation against them.

MA.1.A.1.i: understand and use the terms term, variable, unknown, raised to, power, power of ten, sign, positive numbers, negative numbers, (square) root. Extension: understand and use the terms base, exponent. can use the symbols √, ≤, ≥ and use calculators accordingly. can read and write numbers up to 1 billion.
MA.1.A.1.j: can read and write numbers in scientific notation with positive exponents (e.g. 1.32 · 10⁸ = 132 000 000). can read and write powers with a rational base and a natural exponent.
MA.1.A.3.i: can perform the basic operations with rational numbers. can calculate roots and powers with a calculator (e.g. 4³ · 4³ = 4'096; 4³ + 4³ = 128; ³√8000). Extension: can perform the basic operations with common fractions involving variables and substitute numbers for them: a/b + c/d; a/b − c/d; a/b · c/d; a : c/b : d = a/c · b/d.

Task types: Evaluate a power of a fraction · Evaluate a power of an integer · Power with a minus sign: value: choose the answer · Two powers: compare · Value of a power — choose the answer · Powers of negative numbers in an expression · Powers: complete the sentence · Powers: judge two statements · Powers: match the values

Extracting roots: square and cube roots

The child learns to find the square root of a number, that is, the number which, multiplied by itself, gives the given number, and to use the symbol √ correctly.

8 task typesCreate a worksheet →

Description and task types

The child can determine the square root of a given number, that is, the number that gives the starting number when multiplied by itself. Example: √49 = 7, because 7 · 7 = 49. The child uses the symbol √ and operates the calculator accordingly. The cited curriculum point does not name a separate number range for extracting roots. In the same context, it requires being able to read and write numbers up to 1 billion, and it describes the whole stage, not only Grade 7.

Typical mistakes usually have a clear cause:

  • The root is treated like halving: √36 is written as 18 because the number is divided by two.
  • The result is not checked backwards. With 8 · 8 = 64, √64 = 8 can be verified oneself; without this check, confusions remain undetected.
  • On the calculator, the square key x² is pressed instead of the root key, or the number is mistyped before taking the root.

In the area there are four task templates on this topic: Calculate square root, Square root: select value, Calculate cube root and Cube root: choose the answer. For square roots, the child either calculates the value or selects the correct one from several answers. Cube roots also appear in the templates, but they are not explicitly named in the cited curriculum point. Whether they are binding for one's own grade cannot be read from this point.

MA.1.A.1.i: understand and use the terms term, variable, unknown, raised to, power, power of ten, sign, positive numbers, negative numbers, (square) root. Extension: understand and use the terms base, exponent. can use the symbols √, ≤, ≥ and use calculators accordingly. can read and write numbers up to 1 billion.

Task types: Cube root: choose the answer · Find the cube root · Find the square root · Square root: choose the value · Roots and powers: put in order · Side of a square from its area: inverse question · Square roots: judge two statements · Square roots: match the values

Numbers in Scientific Notation

Your child learns to write very large numbers as a product of a number between 1 and 10 and a power of ten, and to convert them back into standard form.

5 task typesCreate a worksheet →

Description and task types

The Lehrplan 21 states that children can read and write numbers in scientific notation with positive exponents, for example 1.32 · 10⁸ = 132 000 000. The curriculum describes this ability for a longer period and not only for Grade 7. It also includes assigning the SI prefixes Mega, Kilo, Dezi, Centi and Milli to powers of ten.

A typical mistake happens when counting the zeros. The exponent indicates by which power of ten the number is multiplied, and therefore how far the decimal point moves. It is not the number of digits in the number. Anyone who converts 1.32 · 10⁸ into 1 320 000 has therefore written too few zeros. Another common mistake is not bringing the factor in front of the power of ten to a single digit before the decimal point, for example with 132 · 10⁶.

In this class, the tasks focus mainly on writing and reading these numbers. The worksheet formats are:

  • Scientific notation: rewrite a number in scientific form or convert it back.
  • Choose the exponent: determine the matching power of ten from given answer options.
  • Factor: choose the answer: select the correct factor between 1 and 10 from given answer options.

Solutions are available for the worksheets, so you can give your child good support when checking their work.

MA.1.A.1.j: can read and write numbers in scientific notation with positive exponents (e.g. 1.32 · 10⁸ = 132 000 000). can read and write powers with a rational base and a natural exponent.
MA.1.A.3.j: can transform and calculate terms with powers and square roots (e.g. √2 + √2 = 2√2 = √8; √(2³) · √3 = √24 = 2√6). can add, subtract, multiply, divide numbers in scientific notation.
MA.3.A.2.j: can use the decimal system of units (SI system) and assign the prefixes mega, kilo, deci, centi and milli to the powers of ten.

Task types: Numbers with powers of ten: compare · Scientific notation · Scientific notation: the mantissa: choose the answer · Scientific notation in context: which power of ten · Scientific notation: match the values · Standard form: choose the exponent (grade 8)

Estimating and rounding roots

The child learns to estimate the value of a square root and to decide whether an exact or a rounded value is appropriate.

5 task typesCreate a worksheet →

Description and task types

In 7th grade the child learns to estimate a square root and to decide when an exact value and when a rounded value makes sense. The curriculum uses √2 as an example, which can be written exactly as √2 or rounded as 1.41. The curriculum points do not name a specific number range; the tasks mainly show that one places a root between two neighbouring square numbers.

A typical mistake is to confuse the rounded value with the exact one, for example writing √2 = 1.41 as if both were exactly equal. The correct symbol is an approximation sign, because 1.41 is only an approximate value. Likewise, the wrong square number is often chosen when one does not check whether it lies just below the number.

The worksheets on this topic have three task types:

  • Estimate a root: give the approximate value of a root.
  • Estimate a root: choose the integer part: determine the integer part of the root.
  • Root: the square number below: from several answers, choose the square number that lies below the number.

MA.1.A.1.l: understand and use the terms real numbers, irrational numbers.
MA.1.C.1.i: can distinguish between exact and rounded results. decide, depending on the situation, whether to operate with rounded or exact values (e.g. √2 or 1.41).

Task types: A square root and a number: compare · Estimate a square root · Root: the square below: choose the answer · Estimating square roots: complete the sentence · Estimating a square root in context: the side from the area · Estimating a square root: choose the whole part (grade 8)

Negative Exponents: Powers as Fractions

Your child learns that a power with a negative exponent means a reciprocal, for example 2^-3 = 1/8, and how to write fractions as powers.

2 task typesCreate a worksheet →

Description and task types

Lehrplan 21 requires that students work with the concepts of reciprocal and numbers in scientific notation, including negative exponents. This goal extends over several school years. In Grade 7, the task templates for this area show that your child can calculate powers with negative exponents, for example 2^-3, and recognises that a fraction such as 1/25 can be written as the power 5^-2.

A typical mistake is to read the minus sign in the exponent as a minus in front of the result. Then 2^-3 becomes -8 instead of 1/8. Some students also multiply the exponent by the base and get -6. Behind this is a confusion: a negative exponent means the reciprocal, not a negative result. With a positive base, the result stays positive.

This area has three types of tasks:

  • Power with negative exponent: Calculate powers such as 2^-3 or write them as a fraction.
  • Negative exponent: true or false: Check statements such as 3^-2 = -9 and decide whether they are correct.
  • Fraction as a power: choose the answer: Choose, from several options, the power that corresponds to a given fraction.

Reading and writing numbers in scientific notation with negative exponents, such as 0,0045 = 4,5·10^-3, also belongs to the curriculum goal. The task templates mentioned here for Grade 7 do not cover this part.

MA.1.A.1.k: understand and use the terms natural numbers, integers, rational numbers, reciprocal, 3rd root. can read and write numbers in scientific notation, including with negative exponents.

Task types: Negative exponent · Power: a fraction as a power: choose the answer · Negative exponent: find the mistake (grade 8) · Negative exponent: true or false (grade 8)

Students can count flexibly, order numbers by size and estimate results

Comparing and ordering whole numbers

The child can compare positive and negative numbers and put them in the correct order, for example -5, 3, -1, 0 and 4. The curriculum point generally refers to positive and negative rational numbers on the number line. The tasks in this 7th grade class focus primarily on integers.

8 task typesCreate a worksheet →

Description and task types

The child recognises that a number further to the right on the number line is greater than a number further to the left. So they see that -1 is greater than -4, and that all negative numbers are smaller than 0.

A typical mistake: Many children compare only the digits and ignore the minus sign. They therefore think -7 is greater than -3, because 7 is greater than 3. With negative numbers, however, the opposite is true: the further a number is from zero, the smaller it is. The number line is helpful here: look for both numbers on it and check which one lies further to the left.

Typical tasks in this area are:

  • Comparing and ordering integers
  • Comparing integers with their opposites
  • Counting how many integers lie between two numbers
  • Tasks on absolute value, for example deciding whether true or false that the absolute value is smaller than a number, or counting how many integers satisfy an inequality

MA.1.A.2.j: can order positive and negative rational numbers on the number line.

Task types: Absolute value less than a number: find the mistake · Absolute value less than a number: true or false · Integers between two numbers: choose the count · Integers: compare · Integers: put in order · Integers: compare with the opposite number · Integers: how many lie between · Absolute value: how many integers satisfy the inequality

The students can add, subtract, multiply, divide and exponentiate

Calculate percentages: how much is 7% of 35?

The child learns to calculate the percentage value from a number or quantity, for example how much 7 % of 35 is, and conversely to determine what percentage one number is of another.

17 task typesCreate a worksheet →

Description and task types

The child can determine the percentage value of a number or quantity, for example how much 7% of 35 is. They understand percentages as a proportional relationship: 100% is the whole, and 1% is the hundredth part of it. The worksheets show percentages above 100% and below 1%. The curriculum for this level does not specify a fixed number range.

A typical mistake is confusing the two questions: "What percentage is 7 of 35?" (percentage) and "How much is 7% of 35?" (percentage value). Often the child calculates 7 × 35 and leaves out the percent sign, giving the result 245 instead of 2.45. Or they divide 35 by 7 and take that as the answer.

One task on this is "Calculate a percentage value", where the child determines 7% of a given number. The task "Percentage of a quantity: word problem" links this to an everyday example, such as a discount on a price. In "Percentage as a fraction", the percentage is converted into a fraction before calculating. In "true or false", the child checks other people's calculations and so finds typical mistakes.

MA.1.A.3.h: Can perform percentage calculations with a calculator. Extension: can decompose natural numbers into prime factors.
MA.3.A.3.g: can determine function values from graphs of functions. can work with inversely proportional relationships (e.g. number of cards per person with 72 cards and x players). understand percentages as proportional assignments and carry out percentage calculations (e.g. What percentage are 7 of 35, and what is 7% of 35?).

Task types: A percentage greater than 100 · A percentage less than 1 · Percent of a number — choose the answer · Percent of a number: find the mistake · Percent of a number: true or false · Percent of a quantity: percent as a fraction · Percentage of a number: extra data · Percentage of an amount on a bar model · Percentages of different numbers: put in order · Percentages of two numbers: compare · Percent of a number: compare two results · Percent of a number: complete the sentence · Percent of a number: judge two statements · Percent of a number: match the values · Percent of a number: swap the percent and the number · Percent of a quantity: word problem · A percentage of the rest: how many walk · Find the percent of a number (grade 6) · Percentage of a number step by step (grade 6)

Adding and Subtracting Signed Decimal Numbers

The child learns to add and subtract signed decimal numbers and checks results by ordering, comparing, and complementing.

10 task typesCreate a worksheet →

Description and task types

The Lehrplan 21 requires that the basic operations with rational numbers be carried out. For this grade, the task templates show concretely what is meant: adding and subtracting decimal numbers with signs. The curriculum item for this level does not name a precise number range. There are no task templates for fractions in this area, so this text is limited to decimal numbers.

A typical mistake: the decimal places are treated like whole numbers. From 0.7 + 0.25 one then gets 0.32, because 7 + 25 is calculated. The correct result is 0.70 + 0.25 = 0.95, when the digits are lined up. When subtracting a negative number, the minus sign is often lost: 2 − (−3.5) is calculated as 2 − 3.5, although the result is 5.5.

On the worksheets, this topic appears in the following task types:

  • adding or subtracting decimal numbers with signs
  • finding the missing addend
  • ordering decimal numbers with signs by size
  • comparing sums, choosing the matching sum, or deciding whether a statement is true or false

The comparison and checking tasks help to recognise calculation errors before a task is regarded as solved.

MA.1.A.3.i: can perform the basic operations with rational numbers. can calculate roots and powers with a calculator (e.g. 4³ · 4³ = 4'096; 4³ + 4³ = 128; ³√8000). Extension: can perform the basic operations with common fractions involving variables and substitute numbers for them: a/b + c/d; a/b − c/d; a/b · c/d; a : c/b : d = a/c · b/d.

Task types: Add signed decimals · Adding signed decimals: find the mistake · Signed decimals: choose the sum · Subtract signed decimals · True or false: adding signed decimals · Find the missing signed decimal addend · Negative decimals in context: a fall in temperature · Negative decimals in context: a rise in temperature · Signed decimals: order from least to greatest · Sums of signed decimals: compare

What Percentage One Number Is of Another

The child learns to calculate, given two numbers, what percentage one is of the other, for example 7 of 35.

6 task typesCreate a worksheet →

Description and task types

At the end of 7th grade, the child can state, given two numbers, what percentage one is of the other. An example from the curriculum: What percentage is 7 of 35? One possible way is to divide 7 by 35 (0.2) and multiply the result by 100. This gives 20 %, that is, 20 out of 100 equal parts. Percentages make quantities comparable: 60 % of a set says more than a bare number without reference.

The mistake often lies in which number counts as the whole. The word "of" signals that the number following it forms the whole. Whoever divides 35 by 7 gets 5 and therefore 500 %. That does not fit the question, because 7 is only a part of 35. Just as often, multiplying the result by 100 is forgotten, and the child stops at 0.2.

In class, this task type appears under "What percentage is that?". The worksheets on this topic contain such tasks with solutions. A calculator may be used for the calculation. What remains decisive is that the child first recognizes which number is the whole.

MA.1.A.3.h: Can perform percentage calculations with a calculator. Extension: can decompose natural numbers into prime factors.
MA.3.A.2.i: can estimate areas and volumes [m³] in a suitable unit of measure and convert them into neighbouring units of measure. can compare quantities in absolute and relative terms (e.g. 120 pieces or 60% or ⅗ of a quantity). can measure distances and durations for speed calculations.
MA.3.A.3.g: can determine function values from graphs of functions. can work with inversely proportional relationships (e.g. number of cards per person with 72 cards and x players). understand percentages as proportional assignments and carry out percentage calculations (e.g. What percentage are 7 of 35, and what is 7% of 35?).

Task types: Percent: the remaining part: choose the answer · What percent is it? · What percent: write the fraction as a percent · What percent: choose the result · What percent: compare two shares · What percentage of the whole is it?

Power Laws: Calculating with Exponents

In Grade 7, the child learns to calculate with exponents by applying the appropriate rule.

4 task typesCreate a worksheet →

Description and task types

The child learns to multiply powers with the same base by adding the exponents, and to calculate a power of a power by multiplying the exponents. In addition, the child determines a missing exponent in an expression. The Lehrplan 21 describes working with powers, roots and scientific notation across several school years. However, the tasks in this class on this topic focus on the laws of exponents.

The typical mistake is confusing the two rules. When multiplying, the exponents are then multiplied: 2³ · 2⁴ wrongly gives 2¹², while the correct result is 2⁷. For a power of a power, the opposite happens and the exponents are added: (2³)⁴ wrongly gives 2⁷, while the correct result is 2¹². The reason is that both rules work with exponents, and the child is not sure which operation applies when.

The worksheets in this class mainly include these task types:

  • Multiplying powers: choose the exponent: The child chooses which exponent is the correct result of multiplying powers.
  • Power of a power: choose the exponent: The child chooses the matching exponent for a nested power.
  • Missing exponent – laws of exponents: An exponent is missing in an expression, which the child fills in using the laws of exponents.

Solutions are provided for every task, so parents can check the results.

MA.1.A.3.j: can transform and calculate terms with powers and square roots (e.g. √2 + √2 = 2√2 = √8; √(2³) · √3 = √24 = 2√6). can add, subtract, multiply, divide numbers in scientific notation.
MA.1.A.4.m: can transform fraction terms with binomials. can apply the laws of arithmetic to terms with powers and roots as well as to numbers in scientific notation. can solve fractional equations with the unknown in the denominator (e.g. 3/x + 2 = 4/x + 3) and equations with a parameter (e.g. ax + a = 7). can solve systems of linear equations with 2 unknowns.

Task types: Missing exponent — rules of exponents · Multiplying powers: choose the exponent · Power of a power: choose the exponent · Laws of exponents: complete the sentence

Multiplying Fractions: Rectangle and Result

The child can multiply two fractions, interpret the result using a rectangle model, and check whether it makes sense.

3 task typesCreate a worksheet →

Description and task types

The curriculum points describe the goal for an entire stage, not just for Year 7. They name fractions with denominators such as 2, 3, 4, 5, 6, 8, 10, 20, 50 and 100, which are multiplied using the rectangle model and written as decimal numbers. What actually appears in Year 7 is shown by the task types: multiplying fractions, calculating the area of a rectangle, choosing the matching result and choosing the matching denominator.

A typical mistake: many children expect multiplying to make the result bigger, because they know this from whole numbers. However, a fraction times a fraction gives something smaller than the first factor; for example, ⅓ of ¾ is smaller than ¾. The rectangle model makes this visible: you see a part of a part. A second common mistake is adding numerators and denominators instead of multiplying them.

In practice, a task might look like this:

  • Multiplying fractions: The child works out a product of fractions, such as ⅓ · ¾, and checks the result on the rectangle.
  • Area of a rectangle: The side lengths are fractions, and the area is their product.
  • choose the result: The correct product is selected from several options.
  • choose the denominator: The child determines which denominator fits the result.

Worksheets for these tasks are available to print, each with solutions.

MA.1.A.3.g: can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕).
MA.1.C.1.g: can represent and describe sums, differences and products of fractions and of decimal numbers with suitable models (e.g. product: ⅓ of ¾ with the rectangle model; sum: ½ + ¼ with the circle model).

Task types: Multiply fractions · Multiplying fractions: choose the denominator · Multiplying fractions: choose the result · Multiplying fractions: area of a rectangle (grade 5–6)

Factorizing numbers into prime factors

Your child learns to break a natural number down completely into its prime factors, that is, into factors that are themselves divisible only by 1 and by themselves.

2 task typesCreate a worksheet →

Description and task types

Your child breaks a natural number down into factors so that only prime numbers remain at the end, for example 60 = 2 · 2 · 3 · 5. The Lehrplan 21 introduces this as an extension to the topic of percentage calculation and does not specify a particular number range. The exercises themselves best show which number sizes occur.

A typical mistake is that the decomposition stops too early. For example, 12 becomes 2 · 6 instead of 2 · 2 · 3, because the 6 is not broken down further. Also common: the 9 is considered a prime number, or the 1 is counted as a prime number.

The worksheets contain five types of exercises:

  • Prime factorisation: break a number down completely into prime factors.
  • Prime factorisation: choose the number: from several numbers, find the one to which a given factorisation fits.
  • Prime factorisation: the missing factor: in an incomplete factorisation, supply the missing factor.
  • Prime factorisation: which number is it: determine the original number from a factorisation.
  • Prime factorisation: how many factors: given the answer options, state how many prime factors a number has.

MA.1.A.3.h: Can perform percentage calculations with a calculator. Extension: can decompose natural numbers into prime factors.

Task types: Prime factorization: choose the number · Prime factorization: which number is it · Prime factorization: the missing factor (grade 5–6) · Find the prime factorization (grade 5–6) · Prime factorization: how many factors: choose the answer (grade 5–6)

Dividing unit fractions: How many times does it fit?

Your child learns to divide a unit fraction by a whole number and to determine how many times a unit fraction is contained in a whole number.

1 task typesCreate a worksheet →

Description and task types

Your child can work with unit fractions, meaning fractions with numerator 1 such as ⅕ or ¼, in two directions: they divide a unit fraction by a whole number (e.g. ¼ : 2 = ⅛) and determine how many times a unit fraction fits into a whole number (e.g. 2 : ⅕ = 10, because ⅕ fits ten times into 2).

The curriculum lists the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50 and 100 for this skill. This specification applies to the whole curriculum section across several school years, not only to Year 7.

The following often happens: for 2 : ⅕, children expect a smaller result and write 2/5. For ¼ : 2, often only the denominator is divided, so 4 : 2 = 2 and the result is ½ instead of ⅛. The reason is that the rule "division makes smaller" does not apply here and the meaning of the denominator is confused.

The worksheets on this topic contain, among others, these task types:

  • Division by a unit fraction: word problem, how many times does it fit, where the question is how many times a unit fraction fits into a quantity.
  • Dividing a unit fraction by a number, the division of a unit fraction by a whole number.
  • Division by a unit fraction: choose the result, where the correct result is selected from given results.
  • Fraction divided by a whole number: choose the denominator, where the matching denominator of the result must be found.

MA.1.A.3.g: can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕).

Task types: Dividing by a unit fraction: word problem, how many fit · Dividing a unit fraction by a whole number (grade 5–6) · Dividing by a unit fraction: choose the result (grade 5–6) · Fraction divided by a whole: choose the denominator (grade 5–6)

Partial Root Extraction: Taking Factors Out of the Root

The child learns to simplify square roots by pulling a suitable factor out of the root, for example √8 = 2√2.

1 task typesCreate a worksheet →

Description and task types

In grade 7, students learn to simplify root expressions by pulling a factor out of a root whose root can be calculated exactly. In this way, √8 becomes 2√2: the 8 contains the square number 4, and √4 is 2. The goal is a shorter way of writing the root. The curriculum also gives √24 = 2√6 as an example.

A typical mistake is to pull the factor out but not take its root. From √8 this gives 4√2, because the 4 is simply written in front of the root, although only √4 = 2 belongs in front of the root. A simple check helps: if you square the result, the number under the root must come out again. For 4√2 this gives 32 instead of 8.

Tasks on this topic come in these forms:

  • Partially taking the root: A root is simplified as far as possible, for example √12 to 2√3.
  • Pulling a factor out of the root: choose the answer: The correct form is selected from several written versions.
  • Pulling a factor out of the root: true or false: A transformation is checked, for example whether √12 = 2√3 is correct.
  • Partial root extraction: the missing factor: In an equation such as √18 = 3·√■, the missing number is filled in.

MA.1.A.3.j: can transform and calculate terms with powers and square roots (e.g. √2 + √2 = 2√2 = √8; √(2³) · √3 = √24 = 2√6). can add, subtract, multiply, divide numbers in scientific notation.
MA.1.A.4.m: can transform fraction terms with binomials. can apply the laws of arithmetic to terms with powers and roots as well as to numbers in scientific notation. can solve fractional equations with the unknown in the denominator (e.g. 3/x + 2 = 4/x + 3) and equations with a parameter (e.g. ax + a = 7). can solve systems of linear equations with 2 unknowns.

Task types: Simplify a square root · Simplifying a square root: the missing factor (grade 8) · Taking a factor out of a root: choose the answer (grade 8) · Taking a factor out of a root: find the mistake (grade 8) · Taking a factor out of a root: true or false (grade 8)

The students can compare and transform terms, solve equations, apply laws and rules

Solving Equations with Two Steps

You learn to solve equations like 5x + 3 = 7 by transforming both sides step by step in the same way.

13 task typesCreate a worksheet →

Description and task types

In Grade 7 you learn to solve equations with one variable, for example 5x + 3 = 7. You rearrange the equation step by step and always do the same thing to both sides: first subtract 3 from both sides, then divide both sides by 5. This keeps the equation true, and you find the value of x. The curriculum uses exactly this example.

A typical mistake is the sign when moving the 3. From 5x + 3 = 7 you then get 5x = 7 + 3 instead of 5x = 7 − 3. Another common mistake happens with brackets: the number in front of the bracket is applied to only part of it, or the bracket is not expanded correctly. Then the result no longer fits the original equation.

These types of tasks appear in Grade 7:

  • Solve the equation ax + b = c: two steps to find x.
  • Equation with brackets a(x + b) = c: take the bracket and the number in front of it into account correctly.
  • Equation from a word problem: ax + b = c: translate the text into an equation and solve it.
  • I am thinking of a number: set up an equation from a description of a number and solve it.
  • Solving an equation – choose the answer and Moving the constant term – choose the answer: select the correct solution or the correct next step.
  • Finding the missing coefficient and Two equations with the same solution: with the solution in mind, determine the missing number or recognise matching equations.

MA.1.A.4.j: Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules).

Task types: Balance: bags and weights · Equation with brackets step by step · Equation with x on both sides step by step · Equation: moving the constant term: choose the answer · I thought of a number — write and solve the equation · Solution of an equation — choose the answer · Solve ax + b = c · Equation with brackets a(x + b) = c · Find the missing coefficient · Linear equation: complete the sentence · Equation from a story: ax + b = c · Equation word problem: two amounts and their total · Two equations with the same solution · A two-step equation step by step (grade 6)

Solving Equations with x on Both Sides

The child learns to solve linear equations in which x appears on both sides of the equals sign, by performing the same operations on both sides.

7 task typesCreate a worksheet →

Description and task types

In the Lehrplan 21, solving linear equations with one variable using equivalence transformations is one of the extensions. This means that the same arithmetic operation may be performed on both sides of an equation, and the equation remains true. In Year 7, the focus is specifically on equations such as 3x + 4 = x + 10, where x appears both on the left and on the right. The Lehrplan does not specify a separate number range here, so this text only describes the form of the tasks.

A sign error often happens when a number or an x-term moves to the other side. For example, with 5x + 2 = 2x + 11, someone may write 5x − 2x = 11 + 2. Here the 2 has not changed its sign, and the calculation leads to a wrong result. The solution path becomes more reliable when each transformation is written down separately and you ask yourself what you have done to both sides.

The worksheets contain three task types for this topic:

  • Equation with x on both sides: The equation is solved completely, with the solution steps shown.
  • Equation with x on both sides: choose the answer: The correct solution is selected from the given options.
  • Equation with x on both sides: true or false: It is judged whether a solution step or a result is correct. This is well suited to recognising the typical sign error.

MA.1.A.4.j: Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules).
MA.1.A.4.m: can transform fraction terms with binomials. can apply the laws of arithmetic to terms with powers and roots as well as to numbers in scientific notation. can solve fractional equations with the unknown in the denominator (e.g. 3/x + 2 = 4/x + 3) and equations with a parameter (e.g. ax + a = 7). can solve systems of linear equations with 2 unknowns.

Task types: Balance: bags of x on both sides · The solution of an equation and a number: compare · Unknown on both sides · Equation with x on both sides: choose the answer · Equation with x on both sides: find the mistake · Equation with x on both sides: insert the sign · Equation with x on both sides: true or false

Removing brackets and factoring out

The child learns to remove brackets using the distributive law and, conversely, to factor out common factors from a sum.

5 task typesCreate a worksheet →

Description and task types

The child learns to multiply a number or a term in front of a bracket by each term inside the bracket, for example a · (b + c) = a · b + a · c. Conversely, the child recognises a common factor in a sum and factors it out. The curriculum introduces expanding and factoring as an extension. It does not name a fixed number range for this.

A typical mistake is to multiply only the first term in the bracket: 3(x + 4) then wrongly becomes 3x + 4. However, the factor in front of the bracket applies to every term inside it. With a negative factor, a second error occurs: −2(x − 3) often becomes −2x − 6 instead of the correct −2x + 6, because the sign is not taken into account when multiplying by the negative term. When factoring out, often only some of the terms are divided by the factor, for example 6x + 9 = 3(2x + 3), not 3(2x + 9).

Tasks on this topic are worksheets with solutions, which include, for example:

  • Expanding brackets: resolving terms with brackets.
  • Factoring out: pulling the common factor out of a term.
  • Expanding brackets: choose the coefficient: selecting the matching factor in front of the bracket from answer options.
  • Expanding: the missing coefficient: filling in the missing number that must stand in front of the bracket.
  • Distributive law: constant term: choose the answer: determining from answer options the constant term (the number without a variable) that results from expanding.

MA.1.A.4.i: can write a product with equal factors as a power and vice versa (e.g. 15 · 15 · 15 = 15³ ; a · a · a · a = a⁴). can apply the distributive law when transforming terms (e.g. a · (b + c) = a · b + a · c = ab + ac). can round calculation results sensibly. Extension: understand the conventions for the notation of algebraic terms (e.g. abc = a · b · c but 789 ≠ 7 · 8 · 9).
MA.1.A.4.j: Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules).
MA.1.C.2.i: can describe relationships between expressions and figures (e.g. interpret n(n+1) as a rectangle; represent the sum of the first n odd numbers as a square: 1 + 3 + 5 + 7 = 4 · 4). can form expressions for lengths of line segments, areas and volumes and interpret corresponding expressions. can illustrate arithmetic and algebraic expressions, especially with text, symbols and sketches (e.g. the product of two binomials, the sum of three consecutive numbers). can generalise arithmetic regularities with expressions containing letters (e.g. 3(4 + 5) = 3 · 4 + 3 · 5 → a(b + c) = ab + ac). Extension: can formulate arithmetic structures algebraically (e.g. the products 2 · 3 · 4 / 3 · 4 · 5 / 5 · 6 · 7, ... are divisible by 6 → a(a + 1) · (a + 2) · ⅙ is an integer).

Task types: Distributive law: constant term: choose the answer · Expand brackets · Distributive property: the missing coefficient · Expanding brackets: choose the coefficient · Factor out a common factor

Simplify Terms with Variables

Your child learns to add and subtract terms with variables by combining only like terms, for example 3a + 4b instead of 7ab.

5 task typesCreate a worksheet →

Description and task types

A 7th-grade pupil learns to add and subtract terms with variables. In doing so, they combine only like terms, that is, terms with the same letter: 2a and 5a give 7a, while a and b do not merge into one term. The Lehrplan 21 gives the example a + 2a + b + 3b + ¼ + ⅜, which simplifies to 3a + 4b + ⅝. So terms with one variable and with two variables occur, along with fractions as constant terms.

A typical mistake is to add everything that looks like it contains letters. From 3a + 4b one then gets 7ab, or from a + 2a one gets 3a². The reason: the letters are seen as part of the number, instead of as a label for a quantity of which one counts amounts. Only the number in front of the letter (the coefficient) is added. It is also often overlooked that a single a counts as 1a, so a + 2a = 3a. With fractions, one must first extend to a common denominator, because ¼ + ⅜ becomes 2/8 + 3/8 = 5/8.

On the worksheets this appears in several task types: In Gleichartige Terme zusammenfassen (Combine like terms), terms are simplified. In Gleichartige Terme mit zwei Variablen zusammenfassen (Combine like terms with two variables), the a-terms and the b-terms are collected separately. In wähle den Koeffizienten (choose the coefficient), the pupil chooses the correct number in front of the letter; in der fehlende Koeffizient (the missing coefficient), the pupil supplies the number that makes the result consistent. In Absolutglied: wähle die Antwort (constant term: choose the answer), the focus is on the number term without a letter. Solutions for comparison are provided for all tasks.

Terms with squares (a²) or brackets, which the curriculum lists as an extension, do not belong to the task types for this grade.

MA.1.A.4.j: Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules).
MA.1.A.4.k: can add and subtract terms with variables (e.g. a + 2a + b + 3b + ¼ + ⅜ = 3a + 4b + ⅝).

Task types: Combine like terms · Combine like terms in two variables · Like terms: the constant term: choose the answer · Collecting like terms: choose the coefficient · Combining like terms: the missing coefficient

Translating text descriptions into terms

Your child learns to translate a text into an algebraic expression with letters, for example "twice a number, plus 3" as 2x + 3.

5 task typesCreate a worksheet →

Description and task types

Your child learns to translate a description in words into an arithmetic expression in which a letter stands for a number. The curriculum gives an everyday example for this: price = 2 · number + 3. Anyone who reads "twice a number, plus 3" writes 2x + 3. In doing so, your child works with numbers and letters, including with two variables, and can calculate the expression for a given number or choose the matching expression from several options.

A typical mistake occurs with "less than": "5 less than x" is often written as 5 − x, but the correct form is x − 5. The child then follows the order of the words in the sentence instead of thinking about the relationship between the quantities. Missing brackets also occur, for example with "twice the sum of a and b", which means 2(a + b) and not 2a + b.

The tasks on the worksheets follow these templates:

  • Write an expression: more than the multiple by …: form a multiple and add an amount to it.
  • Write an expression with two variables: translate descriptions with two letters.
  • Expression from words: calculate the value: write the expression and calculate it with a given number.
  • Expression from words: choose the value: choose the matching expression from several options.
  • Word instruction: less than a product: choose the answer: check the order in "less than" and choose the matching answer.

Transformations such as factoring out or solving equations belong to the extensions of the curriculum and are not included in the templates for this topic.

MA.1.A.4.j: Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules).
MA.1.C.2.i: can describe relationships between expressions and figures (e.g. interpret n(n+1) as a rectangle; represent the sum of the first n odd numbers as a square: 1 + 3 + 5 + 7 = 4 · 4). can form expressions for lengths of line segments, areas and volumes and interpret corresponding expressions. can illustrate arithmetic and algebraic expressions, especially with text, symbols and sketches (e.g. the product of two binomials, the sum of three consecutive numbers). can generalise arithmetic regularities with expressions containing letters (e.g. 3(4 + 5) = 3 · 4 + 3 · 5 → a(b + c) = ab + ac). Extension: can formulate arithmetic structures algebraically (e.g. the products 2 · 3 · 4 / 3 · 4 · 5 / 5 · 6 · 7, ... are divisible by 6 → a(a + 1) · (a + 2) · ⅙ is an integer).
MA.1.C.2.j: can interpret terms geometrically (e.g. a² · b as a cuboid with a square base, a · b as a rectangle with side lengths a and b, and a + b as the sum of two line segments). can translate linear figure sequences into a term (e.g. the number of matchsticks needed to lay a row of n equilateral triangles as 2n + 1).
MA.3.C.3.g: Extension: can make letter expressions, formulas and linear function equations concrete with real-life situations (e.g. the function equation y = 2x + 3 with price = 2 · number + 3).

Task types: Expression from words: find the value · Words: less than a product: choose the answer · Write an expression in two variables · Write an expression: more than a multiple · Expression from words: choose the value

The students can explore number and operation relationships as well as arithmetic patterns and exchange findings

Evaluate terms: calculate values

The child learns to substitute a given number for a letter and calculate the value of the term.

8 task typesCreate a worksheet →

Description and task types

The child substitutes a concrete number for the letter and calculates the value of the term. The curriculum gives the example a³ + 5a with a = 4: 4³ + 5 · 4 = 64 + 20 = 84. Since rational numbers are also covered in Year 7, it makes sense to substitute negative numbers as well. However, this is not explicitly mentioned in the curriculum point.

Typical errors arise with the notation without a multiplication sign and with powers:

  • Power and product are confused: 4³ is calculated as 4 · 3 = 12 instead of 4 · 4 · 4 = 64.
  • Letter and number are read together: 5a with a = 4 gives 54 instead of 5 · 4 = 20.

Both errors often come from seeing the letter as a mere symbol rather than as a placeholder for a number that is substituted.

On the worksheets for this class, the topic appears in four task types:

  • Calculating the value of a term: substitute a number and work it out.
  • Comparing term values: two terms are calculated for the same number, and the values are compared.
  • Value of a term, selecting the result: the correct term value is chosen from given answers.
  • Difference of two terms at x: the difference of the two term values is determined and the matching answer is chosen.

The curriculum point extends beyond this class, for example to checking divisibility statements or number sequences. These tasks do not belong to the material for this class.

MA.1.B.1.l: can systematically vary numbers, digits and operations, formulate observations and relate them to terms with letters (e.g. When does a · b · c < 100a + 10b + c hold? Find examples and counterexamples).
MA.1.B.2.j: can check algebraic statements by substituting numbers (e.g. a³ + 5a is divisible by 6: 4³ + 5⋅4 = 84 → 84 : 6 = 14; a^(2b) = (a²)^b; 2⁶ = (2²)³ = 2²˙³ = 4³; 2⁸ = 4⁴; 3⁴ = 9²).
MA.1.C.2.i: can describe relationships between expressions and figures (e.g. interpret n(n+1) as a rectangle; represent the sum of the first n odd numbers as a square: 1 + 3 + 5 + 7 = 4 · 4). can form expressions for lengths of line segments, areas and volumes and interpret corresponding expressions. can illustrate arithmetic and algebraic expressions, especially with text, symbols and sketches (e.g. the product of two binomials, the sum of three consecutive numbers). can generalise arithmetic regularities with expressions containing letters (e.g. 3(4 + 5) = 3 · 4 + 3 · 5 → a(b + c) = ab + ac). Extension: can formulate arithmetic structures algebraically (e.g. the products 2 · 3 · 4 / 3 · 4 · 5 / 5 · 6 · 7, ... are divisible by 6 → a(a + 1) · (a + 2) · ⅙ is an integer).
MA.1.C.2.k: can numerically verify or illustrate statements about number sequences and terms (e.g. ½n(n+1) + ½(n+1)(n+2) is a square number, n = 1 → 1 + 3 = 4, n = 2 → 3 + 6 = 9, ... n = 6 → 21 + 28 = 49). can recognise linear, quadratic and exponential growth in terms, number sequences and graphs and describe differences.

Task types: Evaluate an expression · Values of expressions for the same x: put in order · Values of two expressions: compare · Difference of expressions at x: choose the answer · Evaluating expressions: compare two expressions · Value of an expression: choose the result · Value of an expression: judge two statements · Value of an expression: match the values

Disprove with a Counterexample

Your child learns to disprove a statement about numbers by finding a single suitable number for which the statement is not true.

5 task typesCreate a worksheet →

Description and task types

Your child examines statements about whole numbers, for example about divisibility, and can disprove a false statement by finding a counterexample. A single concrete number for which the statement does not hold is enough. In Year 7, this is especially relevant for divisibility.

A typical mistake: the child only checks numbers for which the statement is true and concludes that it always holds. For example: "Every number that is divisible by 6 is also divisible by 12." The number 12 confirms the statement, but the number 6 disproves it, because 6 is divisible by 6 but not by 12. One suitable counterexample is enough.

On the worksheet, your child will meet this topic in three types of tasks:

  • Divisibility: find a counterexample: Your child independently looks for a number that disproves the statement.
  • Counterexample to divisibility: choose the answer: From several numbers, your child selects the suitable counterexample.
  • Counterexample to divisibility: true or false: Your child decides whether a statement is true or not.

MA.1.B.1.l: can systematically vary numbers, digits and operations, formulate observations and relate them to terms with letters (e.g. When does a · b · c < 100a + 10b + c hold? Find examples and counterexamples).
MA.1.B.2.h: can investigate, justify or refute statements about arithmetic regularities (e.g. an odd sum results from adding an even and an odd number; the products of four consecutive numbers are divisible by 24). can investigate and justify the number of decimal places in products and quotients of decimal numbers (e.g. with a calculator).

Task types: Divisibility: find a counterexample · Divisibility counterexample: choose the answer · Divisibility counterexample: find the mistake · Divisibility counterexample: insert the sign · Divisibility counterexample: true or false

Students can explain, verify and justify statements, conjectures and results about numbers and variables

Checking whether a number solves the equation

Your child learns to check whether a number solves an equation by substituting it in, and in this way to verify transformations.

2 task typesCreate a worksheet →

Description and task types

According to Lehrplan 21, this point is an extension: the children can check equivalence transformations, that is, transformations that do not change an equation, by means of a control calculation. The curriculum does not specify a number range for this point. The tasks in this class work with rational numbers, but the principle of substitution stays the same.

A typical mistake: the number is substituted on only one side of the equation, or the sign gets lost. For example, with -x and x = -3 you get 3 and not -3. A number is only a solution if both sides are equal after substitution. Anyone who calculates only one side has checked nothing.

Typical tasks in this class:

  • Is the number a solution? The number is substituted into the equation, both sides are calculated and compared.
  • Find the solution: choose the answer. From several numbers, the one that satisfies the equation is sought. Every answer can be checked by substitution.

MA.1.B.2.i: Extension: can check equivalent transformations with control calculations.

Task types: Equation: is the number a solution · Equation: pick the solution: choose the answer

The students understand and use terms and symbols

Understanding Perpendicular Bisectors and Angle Bisectors

Your child learns to understand the terms perpendicular bisector and angle bisector, to distinguish them from other lines, and to label figures correctly.

5 task typesCreate a worksheet →

Description and task types

Your child learns in Grade 7 to understand and correctly use the terms perpendicular bisector and angle bisector. A perpendicular bisector stands at right angles to a line segment and passes through its midpoint. An angle bisector divides an angle into two equal parts. This also includes correctly labelling points, sides and angles of triangles and quadrilaterals. The curriculum does not specify a numerical range for this; the focus is on understanding the terms and on clear naming within figures.

Two lines are often confused: the perpendicular bisector is equated with the median, although a median only passes through the midpoint of a side and is not necessarily perpendicular to that side. The angle bisector is often confused with the altitude, because both start from a vertex. The error arises because the lines look visually similar. What matters is the property: a right angle and the midpoint for the perpendicular bisector, equal angle parts for the angle bisector.

For this topic, there are the following task types for printable worksheets with solutions:

  • Angle bisector: true or false: Statements about the angle bisector are judged as true or false.
  • Angle bisector: Tasks on the angle bisector in figures.
  • Perimeter with perpendicular bisector: choose the result: The perimeter is determined in connection with a perpendicular bisector, and the correct result is selected from given answers.
  • Perpendicular bisector: Tasks on the perpendicular bisector in figures.

MA.2.A.1.i: understand and use the terms median, angle bisector, altitude, perpendicular, base line, base area, perpendicular bisector, leg, net (development), circumcircle, incircle, quadrilateral, polygon, rhombus, parallelogram, kite, trapezoid, isosceles, equilateral, obtuse, acute, point reflection, rotation, original point, image point, congruent, coordinate system, two-dimensional, three-dimensional. can label geometric objects correctly: points, image points, sides and angles of triangles and quadrilaterals.
MA.2.C.2.h: can draw perpendicular lines, angle bisectors and perpendicular bisectors with a geometry triangle. can construct angle bisectors, perpendicular bisectors and equilateral triangles with compass and straightedge. can draw figures on the computer.

Task types: Angle bisector · Angle bisector: find the mistake · Angle bisector: true or false · Perpendicular bisector · Perimeter with a bisector: choose the result

Congruent Triangles and Their Angles

The child understands the term congruence, recognizes congruent triangles and calculates missing angles in such triangles.

4 task typesCreate a worksheet →

Description and task types

Two triangles are congruent if they match in shape and size and can be placed exactly on top of each other by sliding, rotating or reflecting them. In Grade 7, the children should understand and use this term. The related curriculum item does not specify a number range for it. It also lists terms such as base, cone, prism, pyramid and π, which do not appear in the tasks of this area, however.

A typical mistake arises when matching the vertices. In congruent triangles, equal angles lie at corresponding vertices, not at the same position in the picture. If you match the two triangles incorrectly, you take over the wrong angle and get a wrong result, even though the calculation method is correct.

The tasks in this area show what is practised in Grade 7:

  • Angles in congruent triangles: choose the size – The children select the matching angle size.
  • Angles in congruent triangles: true or false – The children check statements about equal angles.
  • Angles in congruent triangles – The children calculate a missing angle.

MA.2.A.1.k: understand and use the terms congruence(-mapping), base, cone, prism, pyramid, π.

Task types: An angle in a congruent triangle · An angle in a congruent triangle: choose the measure · An angle in a congruent triangle: find the mistake · An angle in a congruent triangle: true or false

Corners, Edges and Faces of Prisms and Pyramids

The child can count the corners, edges and faces of prisms and pyramids, also from a picture, and describe the solid using these details.

4 task typesCreate a worksheet →

Description and task types

In the 7th-grade mathematics course, your child describes solids by their vertices, edges and faces. The exercises involve prisms and pyramids: the child determines how many vertices, edges and faces a solid has. The curriculum does not specify a fixed numerical range for this. The solids shown in the exercises are decisive.

A typical error when working from a picture is miscounting: only the visible edges are counted and the hidden ones on the back are overlooked. With pyramids, there is an additional confusion. The apex is a vertex, and the base also counts as a face. Anyone who counts only the lateral faces therefore often ends up one too low in the face count.

Typical exercises in this area:

  • Counting the vertices, edges or faces of a solid in a picture (templates "Vertices/edges/faces of a solid in a picture")
  • For prisms and pyramids, stating the number of vertices or edges or choosing it from given options ("how many …?" and "choose the number …")
  • Inferring the base from the number of edges (templates "Base from the number of edges"): A prism with an n-gon as its base has 3n edges, and a pyramid with an n-gon as its base has 2n edges. The exercise requires determining the shape of the base from the number of edges.

MA.2.A.1.e: understand and use the terms point, corner, edge, face, cube, cuboid.
MA.2.A.1.l: understand and use the terms tetrahedron, space diagonal, height of the solid, slant height, circular sector, vertex, similarity, hypotenuse, leg, tangent, chord. can describe solids by their properties (lengths of line segments, parallelism of line segments, angles between line segments and surfaces, surface area, volume, space diagonals, net, number and shape of the lateral faces, vertices and edges).
MA.2.B.2.a: can explore and describe properties of figures and solids (e.g. halving a square produces, among others, triangles or rectangles).
MA.2.C.1.g: can build cubes and cuboids from squares and rectangles and vice versa, and draw the net of cubes and cuboids by unfolding.

Task types: Solid in the picture – lateral faces: find the mistake · Solid in the picture: lateral faces · Solid in the picture: lateral faces: choose the result · Solid in the picture: lateral faces: true or false · Prism: choose the number of vertices (grade 4–6) · Prism: how many vertices? (grade 5–6) · Pyramid: how many faces? (grade 5–6) · Edges of a solid from a picture (grade 4–6) · Faces of a solid from a picture (grade 4–6) · Faces of a solid from a picture: choose the result (grade 4–6) · Faces of a solid from a picture: find the mistake (grade 4–6) · Faces of a solid from a picture: true or false (grade 4–6) · Prism: choose the number of edges (grade 4–6) · Prism: how many edges? (grade 5–6) · Prism: the base from the number of edges (grade 5–6) · Pyramid: choose the number of edges (grade 4–6) · Pyramid: how many edges? (grade 5–6) · Pyramid: the base from the number of edges (grade 5–6) · Vertices of a solid from a picture (grade 4–6) · Vertices of a solid from a picture: choose the result (grade 4–6) · Vertices of a solid from a picture: find the mistake (grade 4–6) · Vertices of a solid from a picture: true or false (grade 4–6)

Students can depict, decompose and compose figures and bodies

Axial Reflection: Points and Mirror Images

Your child learns to reflect points and figures across an axis and to recognise whether a figure is symmetrical about an axis.

8 task typesCreate a worksheet →

Description and task types

In grade 7, your child can reflect points and figures across a straight line or axis, sketch the mirror image, and draw it exactly with a set square. They also learn to recognise whether a figure is symmetrical about an axis. The curriculum does not specify a number range for this skill, because it is about position and shape.

A typical mistake is placing the image point at an slant or sideways instead of perpendicular to the axis. Often it lies on the correct side, but at a different distance from the axis than the original point. Points on the axis itself stay unchanged, which is sometimes overlooked. A line is also often taken to be an axis of symmetry simply because it looks right.

In this grade, the tasks appear as printable worksheets with solutions, for example:

  • Reflecting a point across a line: determine the image point and draw it in.
  • Reflection across a vertical line: choose the matching coordinate of the image point.
  • Axial symmetry: reflection across a vertical line: reflect a figure across a vertical axis.
  • Axial symmetry: true or false: decide whether a figure is symmetrical.
  • Axial symmetry: how many axes of symmetry: count the axes of symmetry of a figure.
  • Axial symmetry: axis of a pair of points: find the axis that reflects two points onto each other.

MA.2.A.1.g: understand and use the terms side, diagonal, diameter, radius, area, centre, parallel, line, straight line, line segment, grid, point of intersection, intersect, perpendicular, symmetry, reflection in an axis, perimeter, angle, right-angled, translation, geo-triangle. use the symbols for right angles and parallel lines.
MA.2.A.2.e: can tile in different ways with basic shapes (e.g. with triangles or pentominoes). can reflect figures across axes and sketch mirror images.
MA.2.A.2.g: can draw lines and figures enlarged, reduced, reflected and shifted with a set square, and recognise corresponding transformations.
MA.2.A.2.i: can use a set square and ruler to reflect figures in an axis or a point, translate them, and rotate them by 90°, 180° and 270° using a compass and set square.

Task types: Line symmetry: find the mistake · Line symmetry: reflect across a vertical line · Line symmetry: true or false · Reflect a point in a line · Reflection in a vertical line: choose the coordinate · Line of symmetry in context: where is the mirror line · Line symmetry: axis of a pair of points · Reflection in context: where is the mirror image · Line symmetry: how many lines of symmetry (grade 4–6)

Point Symmetry: Reflecting Figures About a Point

Point Symmetry: Reflecting Figures About a Point

4 task typesCreate a worksheet →

Description and task types

Your child learns to rotate a figure on grid paper around a fixed point, namely by 180°. This is called point reflection. Each point of the figure then comes out on the other side of the centre, at the same distance. The curriculum also requires rotations by 90° and 270°. However, the Year 7 tasks focus on point reflection. It is about figures on grids, not about numerical calculations.

A typical mistake: your child reflects the point as if across a line, so that the figure ends up on the same side or is only shifted sideways. With a point reflection, however, the new point must lie exactly on the imagined straight line that runs through the old point and the centre, and on the other side of the centre at the same distance. When looking for the centre of a pair of points, people often choose an arbitrary point instead of the midpoint of the connecting segment.

Typical tasks in this class are:

  • Point symmetry: does the figure have a centre of symmetry? Your child checks whether the figure can be mapped onto itself about a point.
  • Point reflection: choose the coordinate Your child determines the coordinates of the image point when reflecting in the centre.
  • Reflect a point through a point Your child draws the image point of a given point about the given centre.
  • Point symmetry: centre of a pair of points Your child finds the centre that assigns two given points to each other, i.e. the midpoint of their connecting segment.

MA.2.A.2.h: can shapes on grids rotate them by 90°, 180° (point reflection) and 270° and recognise corresponding transformations.
MA.2.A.2.i: can use a set square and ruler to reflect figures in an axis or a point, translate them, and rotate them by 90°, 180° and 270° using a compass and set square.

Task types: Point symmetry: does the shape have a centre? · Point symmetry: centre of a pair of points · Reflect a point through a point · Reflection through a point: choose the coordinate

Moving, rotating and stretching in the coordinate system

Your child learns to shift points in the coordinate system, to rotate them by 90° or 180° around the origin (the point 0|0), and to stretch them from the origin.

3 task typesCreate a worksheet →

Description and task types

Your child moves points in the coordinate system. The curriculum points on this topic describe a longer period of time. For Grade 7, the tasks in this area mainly show three activities:

  • moving a point down-left or up-right, i.e. changing two coordinates by fixed values;
  • rotating a point by 90° or 180° about the origin;
  • stretching a point at the origin, i.e. multiplying its coordinates by a scale factor.

A typical mistake when stretching is adding instead of multiplying. With a scale factor of 2, (3|1) is wrongly turned into (5|3) instead of correctly into (6|2). When rotating, coordinates are often swapped without adjusting the sign. When shifting, children sometimes confuse left and right or up and down, so the wrong coordinate is changed.

On the worksheet, a task might look like this: the point is shifted or rotated, and the child determines the new position. Typical task types are "Rotation by 90°: choose the coordinate", "Shifting a point", "Central stretching at the origin", "Rotating a point by 180° about the origin", "Rotating a point by 90° about the origin", "Moving a point down-left" and "Moving a point up-right". For stretching, there are also tasks in which a statement is judged as right or wrong. As an additional practice aid (not part of the requirements), your child can first determine the new point by calculation and then check it on the grid.

MA.2.A.2.h: can shapes on grids rotate them by 90°, 180° (point reflection) and 270° and recognise corresponding transformations.
MA.2.A.2.j: can scale figures and cuboids given a scale factor and a center of scaling. can carry out and modify mappings in the coordinate system according to instructions (e.g. x-coordinates remain constant, y-coordinates are doubled).
MA.2.C.4.d: can draw figures in a coordinate system, shift them horizontally and vertically, and state the coordinates of their vertices.
MA.2.C.4.j: can represent geometric mappings in the coordinate system (e.g. reflection of a triangle across the line x = 2).

Task types: Translate a point left and down · Translate a point right and up · Translating a point: choose the coordinate · Dilating a point: find the mistake (grade 8) · Dilating a point: insert the sign (grade 8) · Dilating a point: true or false (grade 8) · Dilation from the origin (grade 8) · Rotate a point 180° about the origin (grade 8) · Rotate a point 90° about the origin (grade 8) · Rotation by 90°: choose the coordinate (grade 8)

The students can determine and calculate lengths, areas and volumes

Volume and surface area of prisms

Your child learns to calculate the volume and surface area of triangular prisms by correctly using the base area, the height, and all the lateral faces.

11 task typesCreate a worksheet →

Description and task types

The Lehrplan 21 describes this goal across several school years: calculating edge lengths, surface areas and volumes of straight prisms and cylinders. In Grade 7, the tasks for this mainly show triangular prisms. The child calculates the volume as base area times height, and the surface area as the sum of all faces, including the two triangles at the ends. The curriculum points do not specify a number range for this.

It is typical for the child to use the wrong length as the height, such as the height of the triangle instead of the length of the prism, or to calculate only the three rectangles for the surface area and forget the two triangular faces. The reason is usually that the solid is not seen as a whole. It can help to draw a net and tick off each face individually:

  • Mark the base (the triangle) and determine its area.
  • Use the length of the prism as the height for the volume.
  • When finding the surface area, count each face exactly once.

The tasks on the worksheets include: Volume of a triangular prism (with multiple-choice answers), Surface area of a triangular prism, Surface area of a prism: choose the result and Volume of a triangular prism in everyday life. For the multiple-choice tasks, it is worth estimating the result before the child ticks an answer.

MA.2.A.3.g: can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids.
MA.2.A.3.i: can calculate the circumference and area of circles. can calculate edge lengths, areas and volumes of right prisms and cylinders. can estimate the volume of arbitrary solids by decomposing them or comparing them with known solids.

Task types: Volume of a triangular prism · Volume of a triangular prism step by step · Volume of a triangular prism: choose the result · Volume of a triangular prism: extra data · Volumes of a cuboid and a cube: compare · Surface area of a prism: choose the result · Surface area of a triangular prism · Box without a lid: how much material · Box-shaped container: how many litres of water · Volume of a triangular prism in real life · Walls of a box-shaped hall: the area to paint

Pythagorean theorem in a right-angled triangle

The child learns to use the Pythagorean theorem to calculate missing side lengths in a right-angled triangle and to check whether a triangle is right-angled.

11 task typesCreate a worksheet →

Description and task types

Your child can calculate missing side lengths in a right triangle using the Pythagorean theorem. It determines the hypotenuse, that is, the side opposite the right angle, from the two legs. Conversely, it can find a missing leg when the hypotenuse and the other leg are known. This also makes it possible to calculate lengths and areas. The curriculum does not specify a particular number range; which numbers appear depends on the task.

A typical mistake is using the wrong side as the hypotenuse. The hypotenuse is always the longest side and lies opposite the right angle. If it is confused with a leg, the whole calculation is wrong. When looking for a leg, a second error often occurs: the child adds instead of subtracting or forgets the square root at the end. This is usually because the formula was memorised but not connected to the position of the sides in the triangle.

Typical tasks are Calculate the hypotenuse and Calculate a leg, which practise the calculation. With Hypotenuse — choose the answer, the child must first recognise which side is the hypotenuse. Pythagoras: one leg — true or false uncovers the typical mistake. Pythagorean theorem: is the triangle right-angled asks whether a given triangle has a right angle. The tasks Pythagoras in everyday life: ladder, diagonal, rope show where the theorem appears outside of school.

MA.2.A.3.h: can calculate lengths and areas using the Pythagorean theorem. can use formulas and spreadsheets in geometric calculations.
MA.2.B.2.g: can explain volume formulas for prisms and pyramids (e.g. decompose a cube into pyramids by cuts and determine their volume). can substantiate theorems of plane geometry with examples and follow their proofs (e.g. Pythagorean theorem, inscribed angle theorem, Thales' theorem).

Task types: Find a leg of a right triangle · Find the hypotenuse · Hypotenuse — choose the answer · Length of the hypotenuse: extra data · Pythagoras' theorem step by step · Pythagorean theorem: is the triangle right-angled · The hypotenuse and a number: compare · Pythagorean theorem: complete the sentence · Pythagorean theorem: judge two statements · Isosceles trapezium: area with the height from Pythagoras · Pythagoras: how much shorter the diagonal is · Hypotenuse: extra data (grade 9) · Pythagoras: a shorter side — true or false (grade 8) · Pythagoras: find the mistake (grade 8) · Pythagoras in real life: a side of a right triangle (grade 8–9)

Calculating the Area of Triangles

Your child learns to calculate the area of a triangle by choosing one side as the base, determining the corresponding height, and halving the product.

6 task typesCreate a worksheet →

Description and task types

Your child can calculate the area of triangles and quadrilaterals and, in doing so, divide polygons into simpler sub-areas. For triangles, this includes explaining the formula: a triangle is half as large as a rectangle with the same base and height, and this can be shown with a sketch. The curriculum does not specify a numerical range for this point. In Grade 7, the tasks mainly show right-angled triangles, where the two legs form the base and the height.

A typical mistake: your child multiplies two sides that are not perpendicular to each other, for example an oblique side instead of the height. Forgetting to halve the result is also common, so the answer comes out twice as large as it should be. Both problems stem from the fact that the formula is only understood when it is clear which line is the height and why one halves the product.

On the worksheet, your child will encounter the topic in tasks such as these:

  • Area of a triangle: right-angled from the legs

  • Area of a triangle: choose the result

  • The area of a triangular plot of land

  • Triangle area: true or false

  • Area of a triangle

MA.2.A.3.g: can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids.
MA.2.B.2.e: can use heuristic strategies: planning, sketching, examining examples, working forwards, working backwards from an assumed solution. can justify statements and area formulas for triangles and quadrilaterals with sketches and models (e.g. a rectangle is divided by its diagonals into four triangles of equal area; the area of a rhombus is half as large as the product of the diagonal lengths).
MA.2.B.2.f: can explain formulas and geometric properties using examples (e.g. the area formula for a triangle, the equal length of the four space diagonals in a cuboid; in a right-angled triangle, the two acute angles together amount to 90°).

Task types: Area of a triangle · Area of a triangle: choose the result · Area of a triangle: find the mistake · Area of a triangle: true or false · Triangle area: complete the sentence · The area of a triangular region · Area of a triangle step by step (grade 5–6) · Area of a triangle: extra data (grade 5–6) · Area of a triangle: right triangle from its legs (grade 5–6) · Areas of a triangle and a parallelogram: compare (grade 5–6)

Calculating the Area of Trapezoids

Your child learns to calculate the area of a trapezoid, using its two parallel sides and the corresponding height.

6 task typesCreate a worksheet →

Description and task types

A trapezoid is a quadrilateral with two parallel sides. The Lehrplan 21 states that children can divide polygons into simpler sub-shapes and thus calculate areas, as well as the areas of triangles and quadrilaterals. The trapezoid is such a quadrilateral. The curriculum does not name a specific number range for this; the numbers depend on the individual worksheets.

A typical mistake is to use the slanted side of the trapezoid instead of the height. The height is perpendicular to the parallel sides, while the slanted side is not. A second common mistake is not halving the sum of the two parallel sides before multiplying it by the height.

Typical tasks on the worksheets for this topic are:

  • Area of a trapezoid: The area is calculated from the given sides and height.
  • The area of a trapezoid-shaped plot of land: The calculation is set in a real-life situation.
  • Area of a trapezoid: choose the result and Area of a trapezoid: true or false: Your child checks given results.
  • Area of a trapezoid: height from the area: The height is determined from a given area.

Solutions are available for all worksheets, so you can follow the calculation steps together with your child.

MA.2.A.3.g: can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids.

Task types: Area of a trapezoid · Area of a trapezoid: choose the result · Area of a trapezoid: find the mistake · Area of a trapezoid: true or false · Area of a trapezoid: find the height from the area · The area of a trapezium-shaped region · Area of a trapezium step by step (grade 5–6) · Area of a trapezium: extra data (grade 5–6)

Calculating areas by decomposing shapes

Your child learns to break a composite figure down into simple sub-areas, calculate the area of each, and add them to get the total result.

5 task typesCreate a worksheet →

Description and task types

Your child learns to divide a figure made up of rectangles or triangles into partial areas. Typical examples are L-shaped figures and polygons that can be split into rectangles. The partial areas are calculated and added together to give the total area. The Lehrplan 21 describes dividing polygons and calculating triangles and quadrilaterals as a goal, and this applies across several school years. For Year 7, the task formats show what is concretely practised. For figures on a grid, the area can also be determined approximately by counting the unit squares.

A common mistake is to calculate a partial rectangle with an incorrect side length, for example using the overall height of the figure instead of the height of the part. Often a side length is missing that would first have to be calculated from the other measurements; anyone who overlooks it continues with the wrong measure. Parts are also sometimes counted twice or forgotten. In figures with a cut-out part, it also occasionally happens that addition is used where an area should actually be subtracted.

The worksheets on this topic have the following task formats:

  • Area of an L-shaped figure: Your child calculates the partial areas of the L-shaped figure and adds them together.
  • Area of a composite figure: choose the result: The correct answer is selected from several proposed solutions. The incorrect suggestions can reflect typical calculation errors.
  • Area of a composite figure: true or false: A pre-worked solution is checked, and the error must be found.

The worksheets contain solutions so that you can follow the calculation steps.

MA.2.A.2.d: can enlarge, reduce and move figures in grids. can decompose polygons into triangles and quadrilaterals and compose figures (e.g. lay figures with triangles).
MA.2.A.3.f: can calculate the volume of cuboids. can approximately determine the area of non-rectangular figures on grids (e.g. counting the number of unit squares in a circle).
MA.2.A.3.g: can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids.

Task types: Area of a composite figure: choose the result · Area of a composite figure: find the mistake · Area of a composite figure: true or false · Area of an L-shaped figure · L-shaped area: the cost of covering it

Calculating the Area of a Parallelogram

The child calculates the area of a parallelogram from the base and the corresponding height, paying attention to the units.

5 task typesCreate a worksheet →

Description and task types

The child calculates the area of a parallelogram by multiplying the base by the corresponding height. The curriculum generally requires decomposing polygons to calculate areas and calculating the area of triangles and quadrilaterals; the parallelogram belongs to the quadrilaterals. The curriculum point does not name a separate number range for this.

Typical errors arise in three places:

  • The slanted side instead of the height: The height stands perpendicular to the base. The slanted side is usually longer and is often confused with the height, but it gives an incorrect result.
  • Mixed units: If the base is given in dm and the height in cm, the units must be converted before calculating. Without conversion, the result is wrong.
  • Superfluous information: A side length that is not needed for the area is nevertheless included in the calculation.

Tasks on this topic look, for example, like this: "Area of a parallelogram" as a basic task; "Area of the parallelogram: choose the result" with several proposed solutions; "Area of a parallelogram: which information is superfluous?"; "Parallelogram in dm and cm: choose the result" and "Area of the parallelogram: base in dm, height in cm", where the units must be made to match; as well as "Area of the parallelogram: height from the area", in which the height is calculated from a given area and base.

MA.2.A.3.g: can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids.

Task types: Area of a parallelogram · Area of a parallelogram: choose the result · Area of a parallelogram: base in dm, height in cm · Area of a parallelogram: height from the area · Area of a parallelogram: which value is not needed? · Parallelogram area in dm and cm: choose the result (grade 6)

Calculating the Volume of Cuboids

The child calculates the volume of a cuboid by multiplying length, width and height together, and understands this using unit cubes.

4 task typesCreate a worksheet →

Description and task types

The child learns how much space a cuboid takes up by multiplying length, width and height. The foundation is counting unit cubes: a cuboid can be built from a given number of cubes or decomposed into a specific number of smaller cuboids. The curriculum points do not specify a separate number range for volume; the numbers that occur are shown by the tasks on the worksheets.

A common mistake is to calculate the area of a side face or to add edge lengths instead of determining the volume. Also widespread is the assumption that the volume doubles when all edges become twice as long. In fact, it becomes eight times as large. This exact relationship is explored by the task "Edges k times as long".

Typical tasks on the worksheets are:

  • Calculating the volume of a cube and the volume of a cuboid
  • Determining volume from unit cubes
  • Finding a missing edge given the volume
  • Solving a word problem about a box
  • Comparing the volumes of two boxes
  • Calculating the volume of a solid made from two cuboids
  • Judging statements about volume as true or false and choosing the matching result

Solutions are provided for all tasks.

MA.2.A.3.e: can measure and calculate the perimeter of polygons. can calculate the area of squares and rectangles. can build cuboids from a given number of cubes and decompose cuboids into a certain number of cuboids.
MA.2.A.3.f: can calculate the volume of cuboids. can approximately determine the area of non-rectangular figures on grids (e.g. counting the number of unit squares in a circle).
MA.2.B.1.k: can systematically vary angles, line segments and areas on figures and solids and formulate conjectures (e.g. angle over a chord in a circle, ratio between the diameter and the circumference of a circle). can systematically vary edge lengths, surface areas or volumes of solids and formulate relationships (e.g. change of edge lengths, surface areas and volume of a cuboid when all edges are halved / doubled). can solve geometric problems constructively using dynamic geometry software and systematically vary figures and relationships (e.g. compare the squares on the two shorter sides of a triangle with the largest square in the triangle).

Task types: Cuboid: complete the sentence · Cuboid: judge two statements · Cuboid: match the values · Volume: edges k times longer · Building plan: how many cubes (grade 4–5) · Volume from unit cubes (grade 5) · Cube building: how many cubes (grade 4–5) · Height of a cuboid from its volume: inverse question (grade 5–6) · Volume of a cube (grade 5–6) · Volume of a cuboid step by step (grade 5–6) · Volume of a cuboid: choose the result (grade 5–6) · Volume of a cuboid: extra data (grade 5–6) · Volume of a cuboid: find the mistake (grade 5–6) · Volume of a cuboid: true or false (grade 5–6) · Volume of a rectangular prism (grade 5–6) · Building plan: front view (grade 5–6) · Building plan: side view (grade 5–6) · Cube building: how many to complete a cuboid (grade 5–6) · Volume of a cuboid: compare two boxes (grade 5–6) · Volume of a cuboid: the missing edge (grade 5–6) · Volume of a solid made of two prisms (grade 5–6) · Volume of a cuboid: word problem (grade 5–6)

The students can represent bodies and spatial relationships

Converting distances using the scale

Children learn to use a scale to convert a distance on a map into a real distance, and vice versa.

8 task typesCreate a worksheet →

Description and task types

In 7th grade, children use a scale such as 1:50 000 to convert a length on the map into the actual length, and vice versa. The curriculum gives examples such as a 12 km hike whose route is drawn on a map. The other curriculum points on scale, such as drawing plans or representing positions in a coordinate system, belong to the curriculum area but are not set up here as a task type.

The typical mistake usually lies in the units and the direction of calculation:

  • The map is measured in cm, but reality is required in km. Without conversion, a wrong answer results.
  • With 1:50 000, going from the map to reality means multiplying: 4 cm · 50 000 = 200 000 cm = 2 km. In the opposite direction you divide: 12 km = 1 200 000 cm, divided by 50 000 gives 24 cm on the map.

A typical task is the template "Distance on the map and in reality". Students measure a distance on a map with a ruler, calculate the real length and check the result in an appropriate unit. There are printable worksheets with solutions for this task type.

MA.2.C.1.l: can make sketches for scale models or build models (e.g. net of a gable roof at a scale of 1:50).
MA.2.C.4.g: can draw a floor plan of a flat to scale or read corresponding plans. can sketch paths and spatial relationships (e.g. the way to school) or use corresponding plans.
MA.2.C.4.h: can represent spatial relationships of objects to scale in a coordinate system (e.g. the school playground).
MA.3.A.3.h: can determine pairs of values for a function equation and plot them in a coordinate system. can determine distances based on scale specifications and vice versa (e.g. mark suitable routes for a 12 km hike on a map).

Task types: Map scale: choose the distance in kilometres · Ratio scale and scale with units: find the mistake · Ratio scale and scale with units: true or false · Map scale: find the scale · Map scale: the distance on the map in centimetres · Map scale: the real distance in kilometres · Scale: from ratio to units · Plan scale: the real area of the region · Real length from a scale step by step (grade 5–6) · Scale of a plan: extra data (grade 5–6) · Distance on a map and in reality (grade 5–6)

Students can fold, sketch, draw and construct figures, as well as exchange and check representations of plane geometry

Compass and Straightedge: Construct Precisely

The child learns to accurately construct angle bisectors, perpendicular bisectors, and triangles from three line segments using a compass and ruler.

3 task typesCreate a worksheet →

Description and task types

In Year 7 the aim is to construct geometric figures precisely with compass and ruler, rather than sketching them by eye. The curriculum points do not specify a numerical range for this. What matters is fixed drawing steps and the accuracy of the finished figure.

A typical mistake is changing the compass opening between two arcs. Then the arcs either do not intersect or intersect at the wrong place, and the construction is no longer correct. When constructing the perpendicular bisector, the radius must be clearly larger than half the segment, otherwise the arcs do not intersect at all. When constructing a triangle from three lengths, a side is sometimes measured off incorrectly or an arc is drawn from the wrong corner.

One task is to reconstruct a given figure or line segment precisely with compass and ruler. The printed worksheets in this area practise the following constructions:

  • Constructing the angle bisector: dividing a given angle into two equal parts with the compass.
  • Constructing the perpendicular bisector: bisecting a line segment and drawing a line through its midpoint at a right angle.
  • Triangle from three sides: drawing a triangle from three given side lengths.

MA.2.C.2.e: can draw rectangles with given side lengths. can draw, modify and describe area ornaments with compass and ruler.
MA.2.C.2.f: can draw with grids, compass and set square (e.g. parallel lines, right angles, right-angled triangles, squares and rectangles).
MA.2.C.2.h: can draw perpendicular lines, angle bisectors and perpendicular bisectors with a geometry triangle. can construct angle bisectors, perpendicular bisectors and equilateral triangles with compass and straightedge. can draw figures on the computer.
MA.2.C.2.i: can sketch figures and geometric relationships and carry out drawings using a geometry set square and compass or dynamic geometry software (e.g. draw or construct a parallelogram with a, b and ha).

Task types: Construct a perpendicular bisector · Construct an angle bisector · Triangle from three sides: check and construct · Construct a triangle from three segments (grade 5–6) · Halving an angle by construction (grade 5–6) · Midpoint of a segment by construction (grade 5–6)

The students can determine the coordinates of figures and solids in a coordinate system or represent figures and solids based on their coordinates, as well as read and draw plans

Area and perimeter in the coordinate system

Your child learns to measure triangles and trapezoids drawn on a grid or in a coordinate system: determining their perimeter and area.

5 task typesCreate a worksheet →

Description and task types

Your child determines the area of figures on a grid and, for right-angled triangles, also the perimeter. To do this, they read the corner points as grid points and determine the side lengths between them. The subject curriculum also describes negative and non-integer coordinates for this area. However, the tasks for this class work with figures on a grid.

A typical mistake: For slanted sides, the side length is used as the height or base, even though it is not perpendicular. Likewise, squares at the edge of a figure are counted twice or forgotten when half squares belong to the area. The child then calculates with a wrong basis and gets a plausible-looking but incorrect result.

The available task templates for this are:

  • Perimeter of a right-angled triangle on a grid: determine and add the side lengths.
  • Area of a triangle in the coordinate system: read the base and height from the grid.
  • Area of a trapezoid in the coordinate system: determine the two parallel sides and the height.
  • Triangle area on a grid: true or false: check a given area and justify it.
  • Trapezoid area on a grid: choose the result: select the correct answer from several options.

MA.2.C.4.i: can represent figures in the Cartesian coordinate system (including with negative and non-integer coordinates). can calculate distances and areas in a coordinate system.

Task types: Area of a triangle on a grid: find the mistake · Area of a triangle on a grid: true or false · Area of a triangle on the coordinate plane · Area of a trapezoid on a grid: choose the result · Area of a trapezoid on the coordinate plane · Perimeter of a right triangle on the grid (grade 8)

The students understand and use terms and symbols for quantities, functions, data and chance

Increasing and decreasing percentages

Your child learns to increase or decrease a number by a percentage and to calculate by what percent a value has changed.

16 task typesCreate a worksheet →

Description and task types

In 7th grade, your child works with percentages in word problems, for example with interest, discounts, or a percentage increase. In doing so, they use the terms interest, interest rate, principal, discount, gross, and net. The curriculum does not specify a separate number range for these tasks. The deciding factor is therefore the types of tasks that occur in this grade.

A common mistake: if a number is first increased by 10% and then decreased by 10%, many children think they end up back at the starting number. With 100, however, this gives 110 and then 99, because the second change refers to the new, higher value. When calculating the change in percent, the wrong base value is also often chosen: the deciding value is the original value, not the new one.

Typical tasks in this grade are:

  • Increase by percent and Decrease by percent
  • Percentage increase or Percentage decrease as a word problem, where the new value is to be found
  • Increase or Decrease: By what percent has the number risen or fallen?
  • Decrease by percent: What was the number before?
  • Percentage change: first an increase, then a decrease
  • Percent up and down: decide whether true or false
  • Percentage increase: choose the correct answer

MA.3.A.1.l: understand and use the terms increase in %, interest, interest rate, capital, discount, gross, net.
MA.3.A.3.i: can determine the function value for a given number from a table of values, from a graph, and with the function equation, and plot pairs of values in the coordinate system (e.g. y = 2x + 1. For x = 7 → y = 15). can use calculators or suitable software (e.g. spreadsheets) to calculate function values and measures. can solve contextual problems involving percentages (e.g. slope and interest).
MA.3.C.1.j: can establish relationships between different quantities based on data (e.g. the connection between distance run and winning in football). can work on social (e.g. accident prevention), economic (e.g. interest, discount, leasing) and ecological (e.g. water consumption, waste disposal) questions and compare numerical data in absolute and relative terms.

Task types: A price after a rise and after a cut: compare · Decrease by a percent · Increase by a percent · Percent increase — choose the answer · Percentage decrease step by step · Percentage increase step by step · Price before a discount: inverse question · Decrease: by what percent did the number fall? · Increase: by what percent did the number grow? · Percent change: find the mistake · Percent change: increase and decrease — true or false · Percent change: first an increase, then a decrease · Percent decrease: what was the number before? · A rise, then a cut by a percentage: the final price · Percentage discount: word problem, the new amount · Percentage increase: word problem, the new amount

Understanding Distance, Time and Speed

Your child learns to calculate the third quantity from two of distance, time and speed, and to convert speeds such as km/h and m/s into one another.

9 task typesCreate a worksheet →

Description and task types

Your child learns to relate distance, time and speed to one another. If two of these quantities are known, the third can be calculated. This also includes converting speeds from one unit into another. The curriculum gives as an example that 200 m in 10 s corresponds to a speed of 72 km/h. The worksheets show which number ranges are practised concretely in Year 7.

The typical mistake usually lies with the units. If the time is given in minutes but the speed in km/h, a conversion must be made first. For 4.5 km/h over 10 minutes, one does not calculate 4.5 × 10 = 45 km travelled, but only 4.5 × (10/60) = 0.75 km, i.e. 750 m. The time must always be in the same unit as the speed, otherwise the result is wrong.

Typical tasks on the worksheets for this area are:

  • Speed from distance and time: How fast did it travel?
  • Distance from speed and time: How far does it travel?
  • Distance, speed, time: Calculate the travel time.
  • Distance, speed and time: Choose the distance, choose the time, true or false, or who was faster?

The tasks come with solutions, so that you can follow the calculation steps together with your child.

MA.3.A.1.k: understand and use the terms absolute and relative frequency, x-coordinate, y-coordinate, x-axis, y-axis, unit length, probability. can use units of measurement and their abbreviations: speed (km/h, m/s, kB/s, dpi).
MA.3.A.2.i: can estimate areas and volumes [m³] in a suitable unit of measure and convert them into neighbouring units of measure. can compare quantities in absolute and relative terms (e.g. 120 pieces or 60% or ⅗ of a quantity). can measure distances and durations for speed calculations.
MA.3.A.2.k: können Berechnungen mit zusammengesetzten Masszahlen durchführen und Grössenangaben von einer Einheit in eine andere umrechnen. können Geschwindigkeiten umwandeln (e.g. von 200m/10s in 72 km/h).
MA.3.A.3.e: can record functional relationships in tables of values (e.g. distances covered at a speed of 4.5 km/h after 10 min, 20 min, 30 min, ...). can work with proportional relationships (e.g. 300 g of cheese at 20 Fr./kg; fuel consumption for 700 km at 6 l/100 km).
MA.3.B.1.g: can formulate and justify functional relationships, in particular for price-performance and distance-time (e.g. purchase of drinks offered in different pack sizes).

Task types: Distance, speed and time: find the mistake · Distance, speed and time: true or false · Average speed step by step · Distance, speed and time: choose the distance · Distance, speed and time: choose the time · Distance, speed, time: find the travel time · Times of two journeys: compare · Distance, speed, time: who was faster? · Average speed over two parts of a journey · Distance at a steady speed: extra data (grade 6) · Distance from speed and time: how far does it travel (grade 6) · Speed from distance and time: how fast was it going (grade 6)

Calculating interest: savings balances and deposits

The child learns to calculate interest from a principal and an interest rate in percent, and to solve word problems about savings accounts.

8 task typesCreate a worksheet →

Description and task types

The child can calculate the interest of a real-life problem from a capital (the principal) and an interest rate in percent. The curriculum does not specify a fixed number range for interest. This also includes determining function values and measures with a calculator or a spreadsheet. The interest is in a fixed relationship to the capital: if the interest rate stays the same, the interest increases proportionally with the capital, which corresponds to the concept of slope in %.

A typical mistake is using the interest rate as a whole number instead of as a proportion. For 2% of 500 francs, one then calculates 500 · 2 instead of 500 · 0.02 and gets 1000 instead of 10 francs. It is often unclear what the percentage refers to: always the capital. The terms capital and interest are also occasionally confused.

Typical tasks on the printable worksheets with solutions are:

  • Interest on a savings balance: The interest is calculated for a given balance and an interest rate.
  • Interest on a deposit: choose the amount: The appropriate amount is selected from given amounts.
  • Interest on a deposit: true or false: Statements about interest are classified as true or false.

MA.3.A.1.l: understand and use the terms increase in %, interest, interest rate, capital, discount, gross, net.
MA.3.A.3.i: can determine the function value for a given number from a table of values, from a graph, and with the function equation, and plot pairs of values in the coordinate system (e.g. y = 2x + 1. For x = 7 → y = 15). can use calculators or suitable software (e.g. spreadsheets) to calculate function values and measures. can solve contextual problems involving percentages (e.g. slope and interest).

Task types: Capital from one year's interest: inverse question · Interest on a deposit: choose the amount · Interest on a deposit: find the mistake · Interest on a deposit: true or false · Interest on a savings deposit · Interest on two deposits: compare · Simple interest step by step · A two-year deposit with interest added: the final sum

Calculating function values of linear functions

Your child learns to determine, for a given number x, the matching function value y of a linear function.

8 task typesCreate a worksheet →

Description and task types

Your child learns to calculate, for a given number x, the corresponding function value y. Usually the function is given as an equation, for example y = 2x + 1: you substitute the number for x and calculate y. In the example from the curriculum, for x = 7 the value is y = 15. The curriculum describes this step for the whole of lower secondary school (Sekundarstufe I) and names three ways: from the equation, from a table of values, or from a graph. It does not name a separate number range only for Year 7.

A typical mistake lies in the order of operations. For y = 2x + 1 with x = 7, for example, only 2 · 7 = 14 is calculated and the +1 is forgotten, or 2 + 7 + 1 is calculated. With negative values for x, sign errors occur as well, for example with 2 · (−3). When reading values from a graph, the x-axis and y-axis are also easily confused.

Tasks on this topic look like this in this subject. The templates are:

  • Function value of a linear function: An x-value is given, and the y-value is to be calculated.
  • Function value – choose the answer: The correct function value is selected from several given values.
  • Function value: true or false: A given statement about a function value is judged as true or false.

The worksheets on this topic contain solutions, so you can give your child good support when checking their calculations.

MA.3.A.1.m: understand and use the terms (linear) function, certain, possible, impossible events, flowchart, bit, byte. can understand and use prefixes: micro, nano. can use units of measurement and their abbreviations: density (kg/dm³, g/cm³).
MA.3.A.3.h: can determine pairs of values for a function equation and plot them in a coordinate system. can determine distances based on scale specifications and vice versa (e.g. mark suitable routes for a 12 km hike on a map).
MA.3.A.3.i: can determine the function value for a given number from a table of values, from a graph, and with the function equation, and plot pairs of values in the coordinate system (e.g. y = 2x + 1. For x = 7 → y = 15). can use calculators or suitable software (e.g. spreadsheets) to calculate function values and measures. can solve contextual problems involving percentages (e.g. slope and interest).
MA.3.C.2.f: recognise proportional and linear (extension: inversely proportional) relationships in real-world situations (e.g. taxi fare with a basic fare and a fixed price per km). can represent pairs of values as well as graphs of functions in the coordinate system (e.g. intermediate times in 10'000 m races; weight or mass and price of food). can translate everyday situations (e.g. area of a room; speed of a car; fuel consumption) into mathematical language, identify the correct quantities and choose suitable units of measurement.

Task types: Evaluate a linear function · Value of a function: find the mistake · Value of a function: true or false · Value of a linear function step by step · Value of a linear function — choose the answer · Value of a linear function: extra data · Values of two linear functions: compare · Linear function in a price list: how much to pay

Predictions with Probability

Your child learns to estimate, from a probability, how often an event is to be expected in a given number of trials.

7 task typesCreate a worksheet →

Description and task types

Your child learns to calculate with probabilities and to predict from them how often an event is to be expected in a certain number of trials. The curriculum lists this as an extension and describes it for the whole stage: carry out random experiments, determine probabilities (for example, the chance of drawing the same suit twice in a row from a card deck) and derive statements about the probability from the relative frequency.

In Year 7, the tasks mainly involve dice and urns. The typical calculation is probability times the number of trials. With 60 throws of a die, for example, one expects roughly 60 · 1/6 = 10 sixes.

A common mistake is to expect an exact result. Someone who expects 10 sixes and gets 13 in 60 throws considers the calculation wrong. However, the expected number is an average value, and the actual result varies. A second mistake is to confuse the observed relative frequency with the probability: someone who throws a six three times in 12 throws has a relative frequency of 3 out of 12, which is not yet the probability.

Typical tasks from the offering are:

  • Expected number: how many throws, where the number of throws is sought
  • Expected frequency, dice: how often, where it is calculated how often a result is to be expected
  • Expected frequency, dice: word problem, the same calculation in an everyday story
  • Expected frequency, urn: how many red, which concerns the expected number of red balls
  • Expected frequency, urn: word problem, the urn situation in text form
  • How often to expect: choose, where the matching expected frequency is selected from given answers
  • Sixes with a die: choose the number of throws, where the matching number of throws is selected

MA.3.A.1.k: understand and use the terms absolute and relative frequency, x-coordinate, y-coordinate, x-axis, y-axis, unit length, probability. can use units of measurement and their abbreviations: speed (km/h, m/s, kB/s, dpi).
MA.3.C.1.i: Extension: can carry out random experiments and determine probabilities (e.g. determine the probability of drawing the same suit 2 times in a row from a deck of cards). Extension: can derive statements about probability from the relative frequency of an event (e.g. in one month, 88 of 2'750 trains are more than 5 min late, 57 of them more than 10 min).

Task types: Expected frequency, die: how many times · Expected frequency, urn: how many red · Sixes on a die: choose the number of rolls · Expected outcomes: how many rolls · How many times to expect: choose · Expected frequency, die: word problem · Expected frequency, random draw: word problem

The Mean: How to Find the Average

The child learns to determine the mean from a series of values and to evaluate it together with the maximum and minimum, including from diagrams.

3 task typesCreate a worksheet →

Description and task types

The child can determine the mean (the arithmetic mean) of a series of numbers: all values are added and the sum is divided by the number of values. In doing so, they analyse a data set. The curriculum points do not specify a particular number range for this procedure, so no number limit is given here.

Two errors often occur. Either the sum is divided by the wrong number, for example because a value is overlooked when counting, or a bar is read incorrectly in a bar chart. In addition, the mean is often confused with the most frequent value or the middle value. However, the mean is a balancing value that does not necessarily have to appear in the list.

On the worksheet, tasks on this topic look, for example, like this:

  • Calculating the mean: add values from a list and divide by the number of values.
  • Mean from a bar chart: read values from the bars and determine the mean from them.
  • Mean from the chart: choose the value: choose the appropriate mean from a chart.
  • Mean: choose the result: choose the correct result from several answers and so check the calculation.
  • The mean in everyday life: calculate and interpret means from everyday situations.

MA.3.A.1.h: understand and use the terms proportionality, area, volume, capacity, mean, pie chart, bar chart, line graph, data, frequency, chance, memory. can orient themselves to reference quantities: 1 m², 1 dm², 1 cm², 1 mm², 1 bit, 1 byte, 1 kB. can name units of measurement and use their abbreviations: area units (km², m², dm², cm², mm²), time (d, h, min, s).
MA.3.A.1.j: understand and use the terms coordinate system, currency, arithmetic mean (extension: inverse proportionality). can use units of measurement and their abbreviations and orient themselves to reference quantities: area measures (km², ha, a, m², dm², cm², mm²), volume measures (km³, m³, dm³, cm³, mm³), money (CHF, €, $).
MA.3.C.1.f: can analyze data sets according to criteria and determine the mean, maximum and minimum in data sets.

Task types: Arithmetic mean: complete the sentence · Mean and median: judge two statements · Mean: which score raised the average · Find the mean (grade 5–6) · Mean from a bar chart: choose the value (grade 5–6) · Mean of four numbers: extra data (grade 5–6) · Mean: choose the result (grade 5–6) · Means of two sets of numbers: compare (grade 5–6) · Missing number from the mean: inverse question (grade 5–6) · The mean step by step (grade 5–6) · Mean from a bar chart (grade 5–6) · The mean in everyday life (grade 5–6)

Converting data amounts into megabytes and gigabytes

The child learns to compare data amounts in megabytes and gigabytes and convert them appropriately.

1 task typesCreate a worksheet →

Description and task types

The curriculum points describe the whole grade level, not just Year 7. For this class, the tasks mainly show that children can compare and convert data quantities in megabytes (MB) and gigabytes (GB). The curriculum also mentions bytes, kilobytes and terabytes, but these do not appear in the task templates for this class.

A typical mistake is using the wrong operation. Someone who knows that giga is larger than mega sometimes divides when converting gigabytes into megabytes, where they should multiply, or the other way round. A gigabyte is also not just a little larger than a megabyte, but very much larger. A feel for this order of magnitude helps to check a result for plausibility.

Typical tasks are:

  • Gigabytes into megabytes: A value given in GB is converted into MB.
  • Megabytes into gigabytes: The correct result is chosen from several answers.
  • Comparing data quantities: It is stated which data quantity is larger.
  • Selecting the converted value: The correct value is recognised among different given values.

MA.3.A.1.h: understand and use the terms proportionality, area, volume, capacity, mean, pie chart, bar chart, line graph, data, frequency, chance, memory. can orient themselves to reference quantities: 1 m², 1 dm², 1 cm², 1 mm², 1 bit, 1 byte, 1 kB. can name units of measurement and use their abbreviations: area units (km², m², dm², cm², mm²), time (d, h, min, s).
MA.3.A.1.i: can orient themselves by reference quantities: 1 m³, 1 dm³, 1 cm³. can understand and use prefixes: mega, giga, tera.

Task types: Gigabytes to megabytes · Megabytes to gigabytes: choose the result (grade 4–6) · Units of data: choose the converted value (grade 5–6) · Units of data: compare (grade 5–6)

Pupils can describe functional relationships and determine function values

Inverse Proportionality: More People, Less per Person

The child learns to calculate with a fixed total amount that is shared among more or fewer people, for example 72 cards among x players.

6 task typesCreate a worksheet →

Description and task types

Your child learns to solve tasks in which a fixed quantity is shared among more or fewer people. The curriculum gives the example of 72 cards shared among x players: the more people play, the fewer cards each person gets. The product of the number of people and the number of cards per person stays the same, here always 72.

A typical mistake is to apply the logic of direct proportionality and think: "more people, so more cards per person". Another common mistake is additive thinking. When changing from 6 to 9 people, students calculate "3 cards fewer" instead of seeing that the number of cards per person changes according to the ratio of the numbers of people. A helpful question is: What happens to the number per person when there are twice as many people?

Tasks on this topic include, for example:

  • Inverse proportional relationship: basic tasks on inversely proportional relationships
  • More people, fewer days: how the duration of a job changes when more people work on it
  • Inverse proportion: choose the value: finding the matching value for a given number of people
  • Inversely proportional: the product: using multiple-choice answers to check whether the product stays constant

MA.3.A.3.g: can determine function values from graphs of functions. can work with inversely proportional relationships (e.g. number of cards per person with 72 cards and x players). understand percentages as proportional assignments and carry out percentage calculations (e.g. What percentage are 7 of 35, and what is 7% of 35?).

Task types: Inverse proportion step by step · Inverse proportion: extra data · Inverse proportion · Inverse proportion: choose the value · Inverse proportion: the product: choose the answer · More units at work, fewer days: inverse proportion

Calculate the whole (base value) from a known percentage value

Calculating the whole from a known percentage. For example: if 20% of a number is 7, how large is the whole number?

4 task typesCreate a worksheet →

Description and task types

The child learns to calculate the whole, that is the base value, from a known percentage value. For example, if 20 % of a number gives 7, then the number is what we are looking for. The curriculum does not specify its own number range for this; it only gives the numbers 7 and 35 as an example. What is practised concretely in Year 7 is shown by the task templates for this area.

A typical mistake is that children calculate as if the known value were the whole: they multiply 7 by 20 and divide by 100 and get 1.4. However, this result is only a part of the number sought. The correct method is: 7 divided by 20 times 100 gives 35. A helpful question is how much 1 % is: 7 divided by 20 gives 0.35, and 100 % is then 35.

The task templates on this topic include, among others:

  • Base value from the percentage value: The whole is calculated from a given percentage value.
  • Percentage value known – how large is the whole? The child determines the number to which the known percentage value belongs.
  • Base value from percent: choose the result: The child chooses the correct answer from several options.
  • Percent: value of 1 %: choose the answer: The child first determines the value of 1 % and from this the whole.

MA.3.A.3.g: can determine function values from graphs of functions. can work with inversely proportional relationships (e.g. number of cards per person with 72 cards and x players). understand percentages as proportional assignments and carry out percentage calculations (e.g. What percentage are 7 of 35, and what is 7% of 35?).

Task types: Find the whole from a percent · Percent: the value of 1%: choose the answer · Whole from a percent: choose the result · We know the percentage part — what is the whole?

Simplifying Ratios: Comparing Parts

The child learns to reduce a ratio of two quantities to its simplest form so that proportions can be easily compared.

3 task typesCreate a worksheet →

Description and task types

In Grade 7, children write two quantities as a ratio, for example number of shops to number of inhabitants, and simplify it so that only the smallest possible whole numbers remain. This makes it possible to compare proportions. An example from the curriculum: In City X there are 2 toy shops for 12,000 people, so 2 : 12,000 = 1 : 6,000. In City Y there are 8 shops for 30,000 people, so 8 : 30,000 = 1 : 3,750. Only in the simplified form can you see that Y has more shops per inhabitant. The example numbers are in the thousands; the curriculum does not specify an exact numerical limit for Grade 7 here.

A typical mistake is that children divide only one of the two numbers by a divisor, or that they stop too early. For example, 8 : 30,000 then becomes something like 4 : 15,000. This looks simplified, but it can still be divided further by 4. The reason: the children look for a common divisor, but not the greatest one. With different units, it is also often simplified before converting, for example with 50 cm : 2 m. There, the same unit must be used first.

Tasks on this topic appear in the following forms:

  • Simplify a ratio: A ratio such as 12 : 30 is brought into its simplest form.
  • Simplify ratios: different units: First both quantities are converted into the same unit, then the ratio is simplified.
  • Simplify ratios: right or wrong: Children check whether a simplified form is correct or whether it can be simplified further.
  • Simplify a ratio: choose the divisor: The suitable common divisor is selected from several numbers.

The worksheets on this are printable and include solutions, so that parents can support their child well with the tasks.

MA.3.A.3.f: can determine and compare shares (e.g. in X with 2 toy shops live 12 000 people; in Y with 8 toy shops live 30 000 people).

Task types: Simplifying ratios: find the mistake · Simplifying ratios: true or false · Simplifying ratios: different units · Simplifying a ratio: choose the divisor (grade 6) · Write the ratio in simplest form (grade 6)

Students can formulate questions about relationships between quantities and functional relationships, investigate these, and check and justify their results

Reading change over time from a graph

The child reads from a distance-time graph how a distance changes over time, and explains when something moves faster, slower, or not at all.

9 task typesCreate a worksheet →

Description and task types

In grade 7, the child can read a graph that shows how a quantity changes over time, for example the distance covered during a journey or during a 400 m run. The child recognises what is written on the two axes, reads off values and describes the progression: the line rises, falls or stays horizontal. The curriculum points do not specify a separate number range for this skill; what matters is the representation itself.

A typical mistake: the child reads the height of the graph as speed, instead of seeing that the gradient, i.e. how steep the line is, stands for the speed. A horizontal section is then interpreted as slow driving, although the distance does not change at all during that time, meaning it is a break. Reading the wrong axis or confusing the final value with the duration also often leads to wrong answers.

Typical tasks at this level are:

  • Journey diagram: speed in the first section
  • Journey diagram: how far in total?
  • Journey diagram: how long was the break?
  • Distance-time diagram: true or false
  • Speed from a distance-time diagram: choose

For "true or false", the child checks a statement about the diagram and justifies it using the course of the line. The solutions on the worksheets help with checking.

MA.3.B.1.i: can check results and statements about functional relationships, in particular by interpreting tables, graphs and diagrams (e.g. the commute by bicycle and train from X to Y takes less time and is cheaper than the journey by car).
MA.3.C.2.f: recognise proportional and linear (extension: inversely proportional) relationships in real-world situations (e.g. taxi fare with a basic fare and a fixed price per km). can represent pairs of values as well as graphs of functions in the coordinate system (e.g. intermediate times in 10'000 m races; weight or mass and price of food). can translate everyday situations (e.g. area of a room; speed of a car; fuel consumption) into mathematical language, identify the correct quantities and choose suitable units of measurement.
MA.3.C.2.g: can represent the dependence between two quantities with a graph of a function and interpret the course of graphs (e.g. distance-time diagram for a 400 m run). Extension: can choose a suitable scale in the coordinate system for tables of values. Extension: can describe linear functional relationships with a term (e.g. exchange rates).

Task types: Trip graph: how long was the stop? · Distance-time graph: find the mistake · Distance-time graph: true or false · Trip graph: how far in total? · Trip graph: speed in the first part · Distance-time graph in context: how long was the stop · Distance-time graph in context: the whole distance travelled · Speed from a distance graph: choose the result · Distance-time graph in context: speed on the first stretch

The students can investigate real-life situations involving statistics, combinatorics and probability, formulate conjectures and test them

Product rule: Counting pairs

Your child learns to determine the number of possible pairs or combinations by multiplying the choices, instead of listing every possibility one by one.

9 task typesCreate a worksheet →

Description and task types

Your child counts pairs and combinations without having to list every possibility laboriously. If there are two choices, you multiply the number of options for one by the number of options for the other. As an example, the curriculum mentions systematically writing down all three-digit numbers made from the digits 1, 2 and 3, with and without repetition. The curriculum describes this skill across several school years. In Grade 7, the tasks mainly involve pairs and three-part selections from manageable sets.

A typical mistake is that children add instead of multiplying when there are two choices. With 3 shirts and 2 pairs of trousers there are 3 · 2 = 6 outfits, not 5. In handshakes, each handshake is often counted twice, because "Anna shakes Ben's hand" and "Ben shakes Anna's hand" are treated as two cases, even though there is only one handshake. Tasks are also confused where the order matters, such as two roles, and those where it does not matter, such as two identical places in a team.

These task types appear on the worksheets:

  • Product rule: how many pairs and Product rule: choosing the number of pairs: combining two choices.
  • Product rule: three choices: three choices in succession, for example clothing.
  • Two different people for two roles: the order matters.
  • Handshakes: how many are there?, Shaking hands: right or wrong and Everyone with everyone: how often?: pairs where the order does not matter.
  • How many combinations are there?: mixed selections.

To check your answers, it helps to write the possibilities in a small table. The worksheets have solutions, so your child can check for themselves whether the number is correct.

MA.3.B.2.d: can systematically write down all possibilities in countable variations and combinations (e.g. numbers with the digits 1, 2, 3 with and without repetition: 123, 132, 213, 231, 312, 321, 112, 121, 211, ...).
MA.3.C.1.h: can carry out multistage random experiments with dice, coins or cards and represent possible events (e.g. draw a tree diagram for tossing a coin three times).

Task types: In how many ways can they be combined? · Multiplication rule: choose the number of pairs · Multiplication rule: how many pairs · Multiplication rule: three choices · Choose two different people for two roles · Everyone with everyone — how many times? · Handshakes: find the mistake · Handshakes: how many are there? · Handshakes: true or false

Estimating Probability from Experiments

Your child learns to draw a reasoned conclusion about the probability of an event from the results of their own random experiments.

3 task typesCreate a worksheet →

Description and task types

Your child carries out chance experiments, for example tossing a drawing pin or rolling two dice, and records the results in a table. The curriculum gives 50 rolls of two dice as an example. From the trials, the child calculates the relative frequency of an event (number of successes divided by number of trials) and forms a conjecture about how likely that event is.

A typical mistake is to treat the frequency from a few trials as the exact probability. If the drawing pin lands point down 4 times in 10 tosses, that is a hint, but not yet a fixed value: with further trials the frequency can turn out quite differently. With complementary probability, children often confuse the event with its opposite and give the frequency of "point down" when the question asks about "not point down".

Tasks on this topic in Year 7 come in three forms, and there are printable worksheets with solutions for each:

  • Estimating a probability from an experiment
  • Relative frequency: choosing the probability
  • Relative frequency: choosing the complementary probability

MA.3.B.2.e: can determine frequencies experimentally and formulate conjectures about their probabilities (e.g. tossing a drawing pin: landing head up or point down; with two dice: getting two even numbers or a sum of 7). are willing to engage with unfamiliar questions about combinatorics and probability.
MA.3.C.1.d: can represent and interpret data on lengths, capacities, weights, durations, quantities and prices in tables and diagrams (e.g. on pets). can carry out random experiments, record results and interpret them (e.g. throw two dice 50 times).

Task types: Estimate a probability from an experiment · Relative frequency: choose the complement probability · Relative frequency: choose the probability

The students can collect, order, represent, evaluate and interpret data on statistics, combinatorics and probability

Reading and comparing diagrams and tables

Your child learns to read values from bar charts and tables, compare bars with each other, determine differences, and add up bars.

5 task typesCreate a worksheet →

Description and task types

In Year 7, your child reads values from column charts and tables and compares them with each other. The curriculum points do not name a fixed number range for this. This description therefore follows the tasks that this topic actually contains. There are three activities:

  • read off individual columns and name their value,
  • compare two columns with each other,
  • add up the values of several columns.

A typical mistake arises with the phrase »um wie viel mehr« ("how much more"). The question asks for the difference between two columns, not the value of the taller column. Also common is overlooking the scale: if one grid line stands for 10 instead of 1, the value read off is wrong. When adding up, a column is sometimes also left out.

The material contains three task types on this:

  • Column chart: compare columns – read the values of two columns and say which one is greater.
  • Column chart: how much more – true or false – check a statement about the difference and give a reason whether it is correct.
  • Reading a chart: choose the sum of the columns – choose the correct sum from several answer options.

The worksheets include solutions, so you can check the answers together with your child.

MA.3.A.1.h: understand and use the terms proportionality, area, volume, capacity, mean, pie chart, bar chart, line graph, data, frequency, chance, memory. can orient themselves to reference quantities: 1 m², 1 dm², 1 cm², 1 mm², 1 bit, 1 byte, 1 kB. can name units of measurement and use their abbreviations: area units (km², m², dm², cm², mm²), time (d, h, min, s).
MA.3.C.1.e: can collect, sort, represent and interpret data statistically (e.g. school routes: distance, means of transport, duration).
MA.3.C.1.g: can represent and interpret data on lengths, capacities, weights, durations, quantities and prices in diagrams using a computer. can compare the probabilities of individual events.
MA.3.C.2.e: recognise proportional relationships in real-life situations (e.g. between number of steps and distance). can process information from factual texts, tables, diagrams and pictures from the media.

Task types: Mean from a dot plot · Mean of four bars in a chart · Mean of four bars in a chart: choose the result · Scaled pictogram: how many more · Share of a bar in the total as a percentage · Bar chart – how many more: find the mistake (grade 4–6) · Bar chart: compare the bars (grade 4–6) · Bar chart: how many more — true or false (grade 4–6) · Reading a bar chart: choose the total (grade 4–6)

Other task types

Other task types

78 task typesCreate a worksheet →

Description and task types

Task types: Perimeter of a rectangle (grade 3) · Perimeter of a rectangle on a grid (grade 2–3) · Draw a rectangle with the given perimeter (grade 3) · Missing side of a rectangle from its perimeter (grade 3) · Perimeter of a rectangle: choose the correct result (grade 3) · Perimeter of a rectangle: true or false (grade 3) · Perimeter: which shape has the greater perimeter? (grade 3) · Order of operations (two steps) (grade 3) · Order of operations: choose the correct result (grade 3) · Order of operations: true or false (grade 3) · Order of operations: groups, then a loss (grade 3–4) · Order of operations: sum first, then multiply (grade 3–4) · Order of operations: total minus equal shares (grade 3–4) · Order of operations: two products and a sum (grade 3–4) · Multiply a fraction by a whole number · Multiplying a fraction by a whole: repeated addition (grade 4–5) · Fraction times a whole number: the missing numerator (grade 5–6) · Multiplying a fraction by a whole number: choose the result (grade 5–6) · Multiplying a fraction by a whole number: find the mistake (grade 5–6) · Multiplying a fraction by a whole number: true or false (grade 5–6) · Dividing fractions: the reciprocal · Divide a fraction by a fraction · Dividing fractions: choose the multiplier · Dividing fractions: choose the result · Divisibility rules: by 2, 5 and 10 (grade 4–5) · Divisibility rules: check divisibility (grade 4–6) · Divisibility rules: by 6, 12, 15, 18 (grade 5–6) · Divisibility rules: missing digit (grade 5–6) · Remainder when dividing by 9 in context: how many are left (grade 5–6) · Remainder when dividing by 9, without dividing (grade 5–6) · Prime or composite? (grade 4–6) · Composite number: the smallest factor (grade 5–6) · Composite number: true or false (grade 5–6) · Prime numbers: choose the prime (grade 5–6) · Factors: smallest number with k factors · Smallest number with k divisors: find the mistake · Smallest number with k divisors: true or false · Factors of a number: choose how many (grade 5–6) · List all factors of a number (grade 4–6) · Factors: how many are there? (grade 5–6) · Divisors in context: how many ways to set out equal rows (grade 5–6) · Evaluate an expression with brackets (grade 4–6) · Order of operations with brackets step by step (grade 4–6) · Order of operations with brackets: choose the result (grade 4–6) · Order of operations with brackets: find the mistake (grade 4–6) · Order of operations with brackets: true or false (grade 4–6) · Same numbers, different order of operations: put in order (grade 4–6) · Two expressions with brackets: compare (grade 4–6) · Unit price: where is it cheaper? · Value for one unit: find the mistake (grade 5–6) · Value for one unit: true or false (grade 5–6) · Price per item step by step (grade 5–6) · Price per item: extra data (grade 5–6) · Unit rate: word problem, the value for one (grade 5–6) · Value for one unit: choose the result (grade 5–6) · A length in one unit: find the mistake (grade 4–5) · A length in one unit: insert the sign (grade 4–5) · A length in one unit: true or false (grade 4–5) · Convert to a larger unit of length (grade 4–6) · Convert to a smaller unit of length (grade 4–6) · Units of length: choose the converted value (grade 4–5) · Units of length: compare (grade 4–5) · Write a length in one unit (grade 4–6) · Adding lengths given in two units (grade 4–5) · Areas of a rectangle and a square: complete the sentence · Rectangle area and perimeter: judge two statements · Area of a rectangle: sides k times longer · Area of a rectangle (grade 4–6) · Area of a rectangle in everyday life (grade 4–6) · Area of a rectangle: extra data (grade 4–6) · Area of a rectangle: find the mistake (grade 4–5) · Area of a rectangle: insert the sign (grade 4–5) · Area of a rectangle: true or false (grade 4–5) · Area of a square: side from area (grade 4–6) · Missing side of a rectangle from its area (grade 4–6) · Missing side of a rectangle: choose the side (grade 4–6) · Side of a rectangle from its area: inverse question (grade 4–6) · Area of a rectangle: compare two areas (grade 4–6) · Area of a rectangle: shape with a corner cut out (grade 5–6) · Angles of a triangle: does such a triangle exist? · The fourth angle of a quadrilateral · The third angle of a triangle · The third angle of a triangle: choose the result · Angles in a triangle: judge two statements · Angles of an isosceles triangle: the apex angle · Angles of a triangle in a given ratio · The third angle of a triangle in real life · Angle sum of a polygon step by step (grade 5–6) · Angle sum of a polygon: compare (grade 5–6) · Angles of a right triangle: the other acute angle (grade 5–6) · Parallel lines and a transversal: missing angle · Find the missing part of an angle (grade 4–6) · Missing part of an angle: choose the measure (grade 4–6) · Missing part of an angle: three angles in a full turn (grade 4–6) · The third angle of a triangle step by step (grade 4–6) · The third angle of a triangle: extra data (grade 4–6) · Third angle in a full turn: choose the measure (grade 4–6) · Cuboid net: surface area (grade 5–6) · Surface area of a cube (grade 5–6) · Surface area of a cube: choose the result (grade 5–6) · Surface area of a cuboid step by step (grade 5–6) · Surface area of a cuboid: extra data (grade 5–6) · Surface area of a rectangular prism (grade 5–6) · Surface areas of two cuboids: compare (grade 5–6) · Surface area of a cuboid: choose the result (grade 5–6) · Surface area of a cuboid: word problem (grade 5–6) · Divide signed numbers · Multiply signed numbers · Multiplying signed numbers: choose the product · Products of signed numbers: put in order · The sign of a product: find the mistake · The sign of a product: insert the sign · True or false: the sign of a product · Chain of signed multiplying and dividing: choose the result · Find the missing signed factor · Multiplying and dividing signed numbers: calculate a chain · Multiplying signed numbers: judge two statements · Pattern: why a negative times a negative is positive · Products of signed numbers: compare · The sign of a product without calculating · Chain of signed multiplication and division: missing number · Area of a circle · Area of a circle: choose the result · Circumference of a circle · Circumference: choose the number before π · Drawing a ball from a box · Rolling a die · Spinner: a number greater than k · Spinner: shaded sections · Chances in two bags: compare · Drawing a numbered card · Probability of the complement · Probability: choose the result · Probability: find the mistake · Probability: true or false · Probability: how many balls of that colour · Drawing without looking: what is the probability? · Sum of two dice (grade 8) · Sum of two dice: choose the probability (grade 8) · Two dice: which sum is more likely (grade 8) · Two draws with replacement (grade 8) · Two draws: find the mistake (grade 8) · Two draws: true or false (grade 8) · Volume of a cone (grade 8–10) · Volume of a cone: find the mistake (grade 8–10) · Volume of a cone: true or false (grade 8–10) · Volume of a cylinder (grade 8–10) · Volume of a cylinder: choose the number before π (grade 8–10) · Volume of a sphere (grade 8–10) · Volume of a cylinder: capacity of a tank (grade 9–11) · Algebra tiles: the coefficient of x · Multiplying binomials: algebra tiles · Multiply (x + a)(x + b) · Multiply two binomials · Product of binomials: constant term: choose the answer · Multiplying binomials: choose the middle term (grade 8) · Multiplying binomials: the missing middle term (grade 8) · Distance between two points (grade 9–11) · Distance between points: extra data (grade 8) · Distance between two points step by step (grade 9–11) · Lengths of two segments: compare (grade 9–11) · Distance between points with Pythagoras (grade 8) · Distance between points: choose (grade 8) · Square on segment AB: choose the area (grade 8) · Distance between points on a coordinate plan: word problem (grade 9–11) · Straight-line distance on a map: word problem (grade 8–9) · Diagonals of a polygon: how many triangles? · Diagonals of a polygon: match the values · Diagonals of a polygon: how many sides? · Diagonals from a vertex: choose the number (grade 5–6) · Diagonals of a polygon step by step (grade 5–6) · Diagonals of a polygon: extra data (grade 5–6) · Diagonals of a polygon: from one vertex (grade 5–6) · Diagonals of a polygon: choose the number (grade 5–6) · Diagonals of a polygon: how many are there? (grade 5–6) · Height of a triangle: is this the height (grade 5–6) · Height of a triangle: choose the result (grade 5–6) · Height of a triangle: from area and base (grade 5–6) · Cube net – the opposite face: find the mistake · Cube net: the opposite face · Cube net: the opposite face: choose the result · Cube net: the opposite face: true or false · Cube net in context: making a dice · Net of a cube: is it a net? (grade 5–6) · Product of a sum and a difference (grade 9–10) · Square of a binomial: choose the x coefficient (grade 9–10) · Square of a sum or difference (grade 9–10) · Sum times difference: choose the constant term (grade 9–10) · Square of a binomial: the missing middle term (grade 9–10) · Area of a similar figure (grade 9–10) · Similar figures: choose the area (grade 9–10) · Similar figures: find the mistake (grade 9–10) · Similar figures: true or false (grade 9–10) · Similar triangles: the missing side (grade 9–11) · Similar figures: the area of a scaled copy (grade 9–11) · Order of operations with integers · Order of operations with integers: find the mistake · Order of operations with integers: insert the sign · Order of operations with integers: true or false · Order of operations with signed decimals · Order of operations with negative numbers: find the mistake · Order of operations with negatives: insert brackets · Order of operations with signed fractions · Grid: area after enlarging · Grid: area after enlarging: choose the result · Grid: side after enlarging · Grid: side after reducing · Grid: the scale factor · Tipping a dice in your head (grade 3–4) · Tipping a dice twice (grade 3–4)

What a problem looks like

Which number is marked on the number line?

□

Answer: −9

Write or = in the box.

5 □ -17

Answer: >

What is the given percentage of the number? Choose the correct answer.

15% × 240 = ?

Answer: d

For tests and lessons

Test in groups A–D

For a test or quiz: print in up to four groups (A–D) — same layout, different numbers and a different order of answer options in each group, one shared answer key.

Create a worksheet in groups →
Adjust problems in the editor

Change numbers, order and wording on a ready-made worksheet.

Try the editor →
Multiple-choice test

The same problems with answer options and an answer card for students.

Create a test →

Review from earlier grades

Topics that do not yet have task types for this grade — the problems come from the grades before.

Writing fractions as decimal numbers

Your child is learning to write fractions such as ¾ or ⅖ as decimal numbers, for example ¾ as 0.75.

Create a worksheet →

Description and task types

Your child learns to write simple fractions as decimal numbers, for example ¾ = 0.75 or ⅖ = 0.4. The curriculum names denominators such as 2, 4, 5, 8, 10, 20, 50, 100 and 1000 for this. It describes this step across several school years. For Grade 7, the tasks in this area mainly show: writing fractions as decimal numbers.

A typical mistake is simply writing the numerator and denominator as digits one after the other. This turns ¾ into 0.34 instead of 0.75. This often reflects the idea that fraction notation and decimal notation follow the same pattern. Another mistake is confusing place value: ¼ is written as 0.4. But 0.4 means four tenths, and a quarter equals 25 hundredths, so 0.25.

A task might look like this: the worksheet "Writing a Fraction as a Decimal Number" lists fractions such as ⅝, ⅕ or 7/20, which your child converts into decimal numbers. It often helps to first expand the fraction to 10, 100 or 1000: ⅝ = 625/1000 = 0.625. This is only one possible solution method, not a requirement. The enclosed solutions are suitable for checking.

MA.1.A.1.h: Understand and use the terms equation, bracket, prime number. Can use the symbols +, -, /, *, =, x², (), ≠ and use calculators accordingly. Can convert fractions (denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000), decimal numbers and percentages each into the two other notations.
MA.1.A.3.g: can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕).

Task types: Fraction to decimal: choose the decimal (grade 5–6) · Fraction to decimal: find the mistake (grade 5–6) · Fraction to decimal: true or false (grade 5–6) · Write a fraction as a decimal (grade 4–6)

Writing decimal numbers as fractions

Your child learns to write a decimal number such as 0.75 as a fraction by reading the places after the decimal point as the denominator.

Create a worksheet →

Description and task types

Your child can convert a decimal number into a fraction. The digits after the decimal point determine the denominator: 0.7 has one digit after the decimal point and gives 7/10, 0.75 has two digits and gives 75/100. The Lehrplan 21 lists, among others, the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 and 1'000 for this topic. It describes these skills over several school years, not only for Grade 7. Which denominators actually appear in this class is shown by the exercises themselves.

A typical mistake lies in place value. The child reads the digits correctly but counts the digits after the decimal point wrongly. So 0.05 becomes 5/10 instead of 5/100, or 0.3 becomes 3/100 instead of 3/10. Sometimes the whole number before the decimal point also gets lost: 2.5 then becomes 5/10 instead of 25/10. Often the cause is that the terms tenths and hundredths are not yet secure.

In this class, your child will encounter three types of exercises for this:

  • Write a decimal number as a fraction: The child writes a decimal number themselves as a fraction, for example 0.6 as 6/10.
  • Decimal number to fraction: choose the fraction: The child chooses the matching fraction from several fractions.
  • Decimal number to fraction: true or false: The child checks a given conversion, for example whether 0.4 = 4/100 is correct. These exercises are particularly good for making the place-value mistake visible.

MA.1.A.1.h: Understand and use the terms equation, bracket, prime number. Can use the symbols +, -, /, *, =, x², (), ≠ and use calculators accordingly. Can convert fractions (denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000), decimal numbers and percentages each into the two other notations.

Task types: Decimal to fraction: choose the fraction (grade 4–6) · Decimal to fraction: find the mistake (grade 4–6) · Decimal to fraction: true or false (grade 4–6) · Write a decimal as a fraction (grade 4–6)

Estimate results beforehand: rough estimation in advance

The child learns to estimate a calculation result roughly by rounding the numbers sensibly, and thereby to check the exact result for plausibility.

Create a worksheet →

Description and task types

Your child can make a rough estimate of a sum beforehand by rounding the numbers to a suitable place value. For example, 23'268 + 4'785 is about 28'000. Estimating does not replace exact calculation; it serves as a check: if the exact result roughly matches the estimate, it is probably correct. The curriculum describes this skill over several school years and also mentions decimal numbers, percentages, products and quotients. In Grade 7, the tasks mainly involve sums where rounding is done to hundreds.

A typical mistake is to round the numbers differently, for example rounding one number up and the other down, without the result becoming more consistent as a result. Equally common is to understand the estimate as the exact result, or to fail to notice a large difference from the exact answer. An estimate is meant precisely to make such mistakes visible.

Typical tasks in this learning unit are:

  • Estimate a sum: The child rounds the addends and estimates the result before calculating exactly.
  • Estimate a sum: choose the estimate: The child decides which of several estimates fits the task.
  • Estimate: choose rounding to hundreds: The child chooses rounding to hundreds and uses it to estimate the sum.

MA.1.A.2.g: can count forwards and backwards from any decimal numbers in appropriate steps (e.g. from 0.725 in steps of 0.005). can order fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100. can order decimal numbers (e.g. 1.043; 1.43; 1.05; 1.5; 1.403). can estimate basic operations with natural numbers (e.g. 13'567 + 28'902 ≈ 40'000; 592'000 : 195 ≈ 600'000 : 200).
MA.1.A.2.h: can estimate sums and differences of decimal numbers (e.g. 0.723 - 0.04 ≈ 0.7; 23'268 + 4'785 ≈ 28'000). can estimate results in percentage calculations (e.g. 263 of 830 is about 30%; 45% of 13'000 is more than 5'000).
MA.1.A.2.i: Extension: can estimate products and quotients of decimal numbers. (e.g. 0.382 : 42.8 → 0.4 : 40 = 0.4 : 4 : 10 = 0.01; 32.7 : 0.085 → 30 : 0.1 = 300 : 1 = 300).
MA.1.B.2.f: Can check results using estimation calculations. Can investigate and justify the number of digits of products and quotients.

Task types: Estimate a sum (grade 4–6) · Estimating a sum: choose the estimate (grade 4–6) · Estimating a total in context: round to hundreds (grade 4–6) · Estimating: choose the rounding to hundreds (grade 4–6)

Multiplying Decimal Numbers: Placing the Decimal Point Correctly

The child multiplies decimal numbers, places the decimal point correctly, and checks the result with an estimate.

Create a worksheet →

Description and task types

The child can multiply decimal numbers with each other and with whole numbers, for example 12 · 0.3. Lehrplan 21 specifies numbers with up to 5 significant digits for this, such as 308 · 52. This specification applies to the entire stage and not only to the 7th grade. What is concretely practised in this grade is shown by the task types in this area: multiplying decimal numbers and multiplying lengths by a number. This also includes checking the result, for example in one's head or using a separate calculation method.

A typical mistake: the child calculates as if there were no decimal point and then places it arbitrarily. From 12 · 0.3 this gives 36 instead of 3.6. Equally wrong is 0.3 · 0.2 = 0.6 instead of 0.06, because the decimal places of the two factors must be added together. An estimate helps: 0.3 is less than 1, so the result must be smaller than 12. The curriculum also requires justifying the number of decimal places in products, for example with a calculator.

A typical task involves multiplying a length by a number, for example: A ribbon is 2.4 m long, how long are 15 ribbons? Or a task under "Multiplying decimal numbers" with several calculations in which the decimal point must be placed and the result checked. The worksheets contain solutions so that parents can follow the calculation.

MA.1.A.3.g: can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕).
MA.1.B.2.h: can investigate, justify or refute statements about arithmetic regularities (e.g. an odd sum results from adding an even and an odd number; the products of four consecutive numbers are divisible by 24). can investigate and justify the number of decimal places in products and quotients of decimal numbers (e.g. with a calculator).

Task types: Multiplying decimals: choose the result (grade 5–6) · Multiplying decimals: find the mistake (grade 5–6) · Multiplying decimals: true or false (grade 5–6) · Multiply a length by a number of pieces (grade 5–6) · Multiply decimals (grade 5–6) · Multiplying decimals: is the product larger? (grade 5–6)

Multiplying in writing: multi-digit numbers

Your child learns to multiply multi-digit numbers and decimal numbers in columns and to check the result by estimating.

Create a worksheet →

Description and task types

The Lehrplan 21 summarises this skill across several school years: multiply decimal numbers with up to 5 significant digits (digits that count, so without leading zeros) and check the results. An example is 308 · 52 or 12 · 0.3. In Year 7, the specific focus is on multiplying multi-digit numbers in columns in writing, even when the second factor has two digits.

A typical mistake: with 308 · 52, the child writes the partial product for the tens (308 · 5) without the zero at the end, so 1540 instead of 15 400. The result is then wrong, because the tens digit has the value of 50 and not of 5. A similar error occurs with decimal numbers: 12 · 0.3 gives 3.6, but often 36 or 0.36 is written, because the decimal point is not placed according to the number of decimal places.

You will find tasks on this in the worksheets for this area, for example:

  • Multiplying multi-digit numbers in writing
  • Written multiplication: the missing partial product
  • Written multiplication by a two-digit number: choose
  • Written multiplication: choose the partial product

An estimate is a good way to check: 308 · 52 is roughly 300 · 50 = 15 000. A result of 16 016 fits this, whereas 1540 or 160 160 do not.

MA.1.A.3.g: can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕).

Task types: Multiply multi-digit numbers (columns) (grade 4–6) · Multiplying by a two-digit number: choose (grade 5–6) · Written multiplication: choose the partial product (grade 5–6) · Written multiplication: the missing partial product (grade 5–6) · Numbers to 100,000: multiplication word problem (grade 4–5)

Dividing Decimal Numbers: Moving Commas Correctly

Children learn to divide decimal numbers by natural numbers and by other decimal numbers by moving the decimal points appropriately.

Create a worksheet →

Description and task types

Among the basic operations with rational numbers, Grade 7 also covers dividing decimal numbers. Children divide a decimal number by a natural number, for example 7.5 : 3, and divide a decimal number by another decimal number by shifting the decimal point the same number of places in both numbers.

A typical mistake is shifting the decimal point in only one of the two numbers. This changes the value of the calculation, and the result is no longer correct. Another common assumption is that division always makes numbers smaller. Anyone who calculates 6 : 0.5 overlooks that the result, 12, is greater than 6.

The worksheets include these task types:

  • Dividing decimal numbers: basic tasks with decimal numbers.
  • Shifting the decimal point in both numbers: division by a decimal number by shifting the decimal point.
  • Dividing decimal numbers: by a natural number: division by whole numbers.
  • Is the quotient greater?: comparing the result with the original number.
  • choose the result: selecting the correct solution from several options.
  • true or false: checking given calculations.

MA.1.A.3.i: can perform the basic operations with rational numbers. can calculate roots and powers with a calculator (e.g. 4³ · 4³ = 4'096; 4³ + 4³ = 128; ³√8000). Extension: can perform the basic operations with common fractions involving variables and substitute numbers for them: a/b + c/d; a/b − c/d; a/b · c/d; a : c/b : d = a/c · b/d.

Task types: Dividing decimals: by a whole number (grade 5–6) · Dividing decimals: choose the result (grade 5–6) · Dividing decimals: find the mistake (grade 5–6) · Dividing decimals: move the point in both numbers (grade 5–6) · Dividing decimals: true or false (grade 5–6) · Divide decimals (grade 5–6) · Dividing decimals: is the quotient larger? (grade 5–6)

Solving Simple Equations with One Variable

Your child learns to solve equations with one variable by finding the unknown number through substitution or inverse operations.

Create a worksheet →

Description and task types

Your child can find the unknown number in an equation with one variable, either by substitution or by inverse operations. With inverse operations, the child undoes the calculation steps: addition is undone with subtraction, and multiplication with division. This also includes applying the order of operations (multiplication and division before addition and subtraction) and the rules for brackets correctly. The curriculum does not specify a fixed number range for equations.

Typical mistakes occur when only one side of the equation is changed. For x + 5 = 12, for example, the 5 is then subtracted only on the left, while the 12 on the right stays unchanged. Often the wrong inverse operation is also chosen, such as subtracting instead of dividing in 3x = 12. Both mistakes happen because the equation is not kept in view as a whole.

  • Both sides of the equation are changed by the same operation.
  • The inverse operation matches the operation that appears in the equation.

On the worksheets for Grade 7, this topic appears as the task "Solve the equation." Solutions are available for the worksheets. As help at home, one can suggest substituting the number found back into the equation. This way, your child can check for themselves whether the solution is correct.

MA.1.A.4.h: can solve equations with variables by substitution or inverse operations. can follow the calculation rules "multiplication before addition" and the bracket rules (e.g. 4 + 8 - 2 · 3 = 6; (4 + 8 - 2) · 3 = 30; 4 + (8 - 2) · 3 = 22). Extension: can use divisibility rules for 3, 4, 6, 8, 9, 25, 50 and determine divisors of natural numbers.

Task types: Equation a · x = b: find the mistake (grade 4–6) · Equation a · x = b: is the number a solution? (grade 4–6) · Equation a × x = b (grade 4–6) · Equation x + a = b (grade 4–6) · Equation x ÷ a = b (grade 4–6) · Equation x − a = b (grade 4–6) · Equation x − a = b: choose the solution (grade 4–6) · Equation x + a = b: change on both sides (grade 4–6)

Square and Cube Numbers: Understanding Powers

Children learn to write repeated identical factors as a power, for example 15 · 15 · 15 = 15³, and to read powers again as a product.

Create a worksheet →

Description and task types

The child can write a product of equal factors as a power and vice versa, for example 15 · 15 · 15 = 15³ or a · a · a · a = a⁴. The learning objectives do not name a fixed number range for this, but give examples instead. The same learning objective also covers expanding with the distributive law, such as a · (b + c) = ab + ac, and sensibly rounding calculation results. However, these two points do not appear in the task templates listed here.

Typical errors mostly have to do with the meaning of the exponent:

  • 3² is calculated as 3 · 2 = 6. The exponent shows how often the base occurs as a factor, not what it is multiplied by.
  • With fractions, only the numerator or only the denominator is squared, or the exponent is multiplied by the fraction. The correct result is (2/3)² = 4/9.
  • When comparing a^b and b^a, the base and exponent are confused. For example, 2³ = 8 is smaller than 3² = 9.
  • The notation cannot be transferred to digit sequences: 789 means seven hundred eighty-nine and not 7 · 8 · 9. The writing conventions belong to the extension of the learning objective.

In this class, powers are printed as tasks in these forms:

  • Square and cube numbers
  • Power of a natural number: choose the matching result
  • Square of a fraction
  • Power of a fraction: choose the matching denominator
  • Compare powers a^b and b^a
  • Power: find the missing base

MA.1.A.4.i: can write a product with equal factors as a power and vice versa (e.g. 15 · 15 · 15 = 15³ ; a · a · a · a = a⁴). can apply the distributive law when transforming terms (e.g. a · (b + c) = a · b + a · c = ab + ac). can round calculation results sensibly. Extension: understand the conventions for the notation of algebraic terms (e.g. abc = a · b · c but 789 ≠ 7 · 8 · 9).

Task types: Power of a fraction: choose the denominator (grade 5–6) · Power of a whole number: choose the result (grade 5–6) · Powers of small numbers: put in order (grade 4–6) · Square and cube of a number (grade 4–6) · Square of a fraction (grade 5–6) · Power: the missing base (grade 5–6) · Powers: compare a^b and b^a (grade 5–6)

Rounding decimal numbers: to tenths and hundredths

Your child learns to round decimal numbers to tenths or hundredths by checking the digit after the rounding place.

Create a worksheet →

Description and task types

In Grade 7, your child rounds decimal numbers to tenths and to hundredths. To do this, they look at the digit directly after the rounding place: if it is 4 or less, the digit in the rounding place stays the same. If it is 5 or more, they round up. So 1.745 rounded to tenths is 1.7, but rounded to hundredths it is 1.75.

A typical mistake happens when children simply cut off all digits after the rounding place. For example, 1.78 then becomes 1.7 instead of 1.8. Another common error is a carry-over mistake: when rounding 0.96 to tenths, children write 0.9 because they leave out the 6. The correct answer is 1.0, because the 9 becomes 10, which carries over to the ones place.

In the worksheet on this topic, you will find four types of tasks, each with solutions:

  • Round to tenths: round numbers directly to one decimal place.
  • Round to hundredths: round numbers to two decimal places.
  • Round to tenths: choose the result: choose the correct rounded result from several options.
  • Round to tenths: true or false: decide whether a given rounded result is correct.

The last two types of tasks are well suited to uncovering typical mistakes such as cutting off digits or forgetting the carry-over.

MA.1.A.4.g: recognise numbers that are divisible by 2, 5, 10, 100, 1'000. can round decimal numbers (e.g. 17'456 to the nearest hundred; 1.745 to the nearest tenth).
MA.1.A.4.i: can write a product with equal factors as a power and vice versa (e.g. 15 · 15 · 15 = 15³ ; a · a · a · a = a⁴). can apply the distributive law when transforming terms (e.g. a · (b + c) = a · b + a · c = ab + ac). can round calculation results sensibly. Extension: understand the conventions for the notation of algebraic terms (e.g. abc = a · b · c but 789 ≠ 7 · 8 · 9).
MA.1.C.1.i: can distinguish between exact and rounded results. decide, depending on the situation, whether to operate with rounded or exact values (e.g. √2 or 1.41).

Task types: Round to the nearest hundredth (grade 5–6) · Round to the nearest tenth (grade 5–6) · Rounding to tenths: choose the result (grade 5–6) · Rounding to tenths: find the mistake (grade 5–6) · Rounding to tenths: true or false (grade 5–6)

Solving two equations together

Your child learns to consider two equations with the unknowns x and y at the same time and to find the pair of numbers that works in both.

Create a worksheet →

Description and task types

Your child learns in this class to determine, for two equations with the unknowns x and y, a pair of numbers that satisfies both equations at the same time. The tasks work within the number range of rational numbers, which the class is working with. The curriculum also mentions determining the intersection of two lines algebraically and graphically; however, the task templates for this area do not show a separate task format for this, but mainly the calculation itself.

A typical mistake: your child calculates one value, substitutes it into one of the two equations and considers the task finished. The pair then often only fits this one equation. When solving, sign errors also occur when one equation is subtracted from the other. The check in both equations is therefore the most important step.

Three types of tasks appear in the worksheets for this area:

  • Linear system of equations: Both unknowns are calculated.
  • System of equations: is the pair a solution? A given pair of numbers is substituted into both equations, and the child decides whether it fits.
  • System of equations: choose x The unknown x is the focus of the task; the exact arrangement can be found on the worksheet.

The printable worksheets include solutions, so you can easily check your child's calculations.

MA.1.A.4.m: can transform fraction terms with binomials. can apply the laws of arithmetic to terms with powers and roots as well as to numbers in scientific notation. can solve fractional equations with the unknown in the denominator (e.g. 3/x + 2 = 4/x + 3) and equations with a parameter (e.g. ax + a = 7). can solve systems of linear equations with 2 unknowns.
MA.3.A.3.j: can determine the point of intersection of two straight lines algebraically and graphically.

Task types: System of equations: choose x (grade 8) · System of equations: find the mistake (grade 8) · System of equations: insert the sign (grade 8) · System of equations: is the pair a solution? (grade 8) · System of two equations (grade 8)

Adding and subtracting fractions with unlike denominators

Your child learns to add and subtract fractions with different denominators by first expanding them to a common denominator.

Create a worksheet →

Description and task types

The curriculum describes this skill for an entire level, not just for Year 7. It names fractions with denominators 2, 3, 4, 5, 6, 8, 10, 20, 50 and 100, which are shortened, expanded, added and subtracted using the rectangle model. The task types on this page show what is practised concretely in Year 7.

The typical mistake is to simply add numerators and denominators together. For example, ½ + ⅓ then wrongly becomes 2/5, even though ½ and ⅓ are parts of different sizes. When subtracting, children often calculate numerator minus numerator and denominator minus denominator: ¾ − ½ then gives 2/2. The reason is that the denominator indicates the size of the parts. You can only add or subtract parts of the same size. That is why both fractions must first be brought to the same denominator, for example ½ + ⅓ = 3/6 + 2/6 = 5/6.

Typical tasks in this unit are:

  • Adding: "Adding fractions with different denominators", "Adding fractions with unequal denominators: word problem", "Fractions with unlike denominators: choose the sum" and "Fractions with unlike denominators: true or false"
  • Subtracting: "Subtracting fractions with different denominators", "Subtracting fractions with unlike denominators: the numerator", "Subtracting fractions with unlike denominators: choose" and "Subtracting fractions with unlike denominators: true/false"
  • Making denominators the same: "Fractions with unlike denominators: numerator after making denominators the same" practises the decisive step, in which the numerator is correctly adjusted.

The "true or false" tasks are particularly well suited to identifying and justifying typical mistakes together.

MA.1.A.3.f: can add and subtract decimal numbers with up to 5 significant digits (mentally or by writing down their own calculation methods, e.g. 30.8 + 5.6). can simplify, expand, add and subtract fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can carry out basic operations with a calculator.
MA.1.C.1.g: can represent and describe sums, differences and products of fractions and of decimal numbers with suitable models (e.g. product: ⅓ of ¾ with the rectangle model; sum: ½ + ¼ with the circle model).

Task types: Fractions with unlike denominators: find the mistake (grade 5–6) · Fractions with unlike denominators: true or false (grade 5–6) · Subtracting unlike fractions: find the mistake (grade 5–6) · Subtracting unlike fractions: true or false (grade 5–6) · Add fractions with unlike denominators (grade 5–6) · Adding unlike fractions: word problem (grade 5–6) · Fractions with unlike denominators: choose the sum (grade 5–6) · Fractions with unlike denominators: numerator after renaming (grade 5–6) · Subtract fractions with unlike denominators (grade 5–6) · Subtracting unlike fractions: choose the result (grade 5–6) · Subtracting unlike fractions: the numerator (grade 5–6)

Translating word problems into equations

Your child learns to write a task from the text as an equation with one unknown and to solve this equation.

Create a worksheet →

Description and task types

Your child can translate a number riddle or a word problem into an equation with one unknown and solve it. An example from the curriculum: someone thinks of a number, triples it and increases the result by 3, and 33 comes out. This gives the equation 3·x + 3 = 33, and its solution is x = 10. The curriculum does not specify a fixed number range for this, but rather examples like these.

The typical source of error lies in the order of the calculation steps. Phrases such as "tripled" and "increased by 3" are sometimes combined incorrectly, for example into 3·(x + 3) = 33, or the "+ 3" is overlooked. The equation then does not match the text, even if the subsequent calculation is correct. It is therefore worthwhile to first read the text sentence by sentence and define the unknown.

At this level, the following task types occur most often in this subject area:

  • Equation from the text: Which number was thought of?
  • Equation for the starting value: Word problems in which the starting value is sought.
  • Equation with unknown: Choose the matching equation from several equations.
  • Equation with unknown: Decide whether a given equation matches the text (true or false).

MA.1.C.2.h: can express number puzzles mathematically and invent them (e.g. if you triple a number and increase it by 3, the result is 33). can describe figure sequences numerically (e.g. the number of visible faces in towers of dice with 1, 2, 3, 4, ... dice).
MA.3.C.3.g: Extension: can make letter expressions, formulas and linear function equations concrete with real-life situations (e.g. the function equation y = 2x + 3 with price = 2 · number + 3).

Task types: Equation from context: which number was it (grade 5–6) · Equation with an unknown: choose the answer (grade 5–6) · Equation with an unknown: find the mistake (grade 5–6) · Equation with an unknown: true or false (grade 5–6) · Equation for the starting amount: word problem (grade 5–6)

Continuing Number Sequences According to a Rule

The child learns to continue a number sequence from a rule and to determine individual terms, for example when the step is always the same.

Create a worksheet →

Description and task types

In Year 7, the child recognises what repeats from term to term and continues the sequence accordingly. The curriculum gives examples such as 90, 81, 70, 57, ... or 1, 3, 6, 10, 15, ..., so including sequences with steps of different sizes. However, the tasks in this year focus mainly on sequences with a constant step (always adding the same amount) and sequences with a constant factor (always multiplying by the same number), along with figure patterns, where a rule is derived from the number of squares or cubes in Figure 1, 2, 3 ...

A typical mistake with sequences with a constant factor such as 2, 4, 8, 16, ... is to add instead of multiply, giving 2, 4, 6, 8. The child then takes the first difference as the rule, even though the sequence follows a different operation. In figure patterns, students often count only the newly added figure instead of the total number, or they confuse the number of the figure with the number of elements. For questions such as "which term is 25?", it helps to consider the value and the position separately.

Typical tasks in this year are:

  • Sequence: always adding the same amount and always multiplying by the same number: find the rule and continue the sequence
  • Recognise the rule and continue the sequence
  • Sequence with a fixed step: determine the first term, find which term a number is, select a term, or decide whether statements are true or false
  • Figure patterns: how many squares does figure n have?

MA.1.B.3.d: can follow instructions for sequences of actions (e.g. in flowcharts) and use them when exploring arithmetic structures (e.g. 1. Start with a two-digit number / 2. If the number is even: Divide by 2, otherwise: Multiply by 3 and add 1 / 3. Repeat 2.).
MA.1.C.2.f: can illustrate number sequences and products (e.g. 14 · 14 with the multiplication grid; the number sequence 1, 3, 6, 10, ... with dots).
MA.1.C.2.g: can illustrate regularities in the domain of natural numbers with examples (e.g. square numbers have an odd number of divisors → 16: 1, 2, 4, 8, 16). can represent fractions with denominators 2, 3, 4, 5, 6, 8, 10 and compare them, as well as interpret representations (e.g. circle and rectangle models, number line). can describe number sequences with positive rational numbers (e.g. ½, ¼, ⅛, ...; 0.7, 0.77, 0.777, ...).
MA.1.C.2.h: can express number puzzles mathematically and invent them (e.g. if you triple a number and increase it by 3, the result is 33). can describe figure sequences numerically (e.g. the number of visible faces in towers of dice with 1, 2, 3, 4, ... dice).
MA.3.A.3.c: can continue linear and non-linear number sequences (e.g. 90, 81, 70, 57, ...; 1, 4, 9, 16, ...; 1, 3, 6, 10, 15, ...).

Task types: Pattern with a constant step: choose the term (grade 4–6) · Pattern with a constant step: find the mistake (grade 4–6) · Pattern with a constant step: true or false (grade 4–6) · Pattern: add the same step (grade 4–6) · Pattern: multiply by the same number (grade 4–6) · Pattern with a constant step: the first term (grade 5–6) · Pattern with a constant step: which term is it (grade 5–6) · Spot the rule and continue the pattern (grade 4–6) · Visual pattern: how many squares in figure n (grade 4–6)

Reading points in the coordinate system

Your child reads the coordinates of a marked point and states them in the correct order: first the horizontal value, then the vertical value.

Create a worksheet →

Description and task types

Your child can read both values from a marked point in the coordinate system and write them as a pair, for example (3|2). The first value is the x-coordinate and is measured horizontally from the origin, the second is the y-coordinate and is measured vertically. The curriculum for this topic also mentions negative and non-integer coordinates. Which number range applies specifically in Year 7 is not clear from the worksheet templates for this area.

A common mistake is swapping the two values. The child writes (2|5) even though the point lies 5 squares to the right and 2 up, or counts along the wrong axis. The order is fixed: first horizontal, then vertical. Anyone who does not check this deliberately can easily mix them up.

The tasks in this area take the following forms:

  • Read the coordinates of a point: The x- and y-coordinates of a marked point are noted down.
  • Coordinate of a point: true or false: The child checks whether a given coordinate is correct.
  • Coordinate of a point: choose the first or the second: The child determines which value is the horizontal coordinate and which is the vertical coordinate.

Printable worksheets with solutions are available for every topic. Plotting points and shapes from coordinates is part of the curriculum, but the templates in this area do not offer it as a separate task.

MA.2.A.1.h: understand and use the terms coordinates, view, side view, top view, front view.
MA.2.A.1.j: understand and use the terms x-coordinate, y-coordinate, x-axis, y-axis, unit length, lateral surface, prism, cylinder. be able to characterise triangles and quadrilaterals by their angles, parallelism, diagonals and side lengths.
MA.2.C.4.d: can draw figures in a coordinate system, shift them horizontally and vertically, and state the coordinates of their vertices.
MA.2.C.4.f: can draw figures in a coordinate system and determine the coordinates of points (e.g. span figures on the geoboard according to coordinates and draw them).
MA.2.C.4.h: can represent spatial relationships of objects to scale in a coordinate system (e.g. the school playground).
MA.2.C.4.i: can represent figures in the Cartesian coordinate system (including with negative and non-integer coordinates). can calculate distances and areas in a coordinate system.
MA.3.A.1.j: understand and use the terms coordinate system, currency, arithmetic mean (extension: inverse proportionality). can use units of measurement and their abbreviations and orient themselves to reference quantities: area measures (km², ha, a, m², dm², cm², mm²), volume measures (km³, m³, dm³, cm³, mm³), money (CHF, €, $).

Task types: Coordinate of a point: choose the first one (grade 5–6) · Coordinate of a point: choose the second one (grade 5–6) · Coordinate of a point: find the mistake (grade 5–6) · Coordinate of a point: insert the sign (grade 5–6) · Coordinate of a point: true or false (grade 5–6) · Read the coordinates of a point (grade 5–6) · Coordinates on a map: read the position (grade 5–6)

Naming triangles by sides and angles

The child learns to correctly name triangles by their sides (equilateral, isosceles, scalene) and by their angles (acute, right-angled, obtuse).

Create a worksheet →

Description and task types

The child can classify a triangle by its sides and its angles. By sides, the child distinguishes equilateral triangles (all three sides equal in length), isosceles triangles (two sides of equal length, the legs) and triangles with no sides of equal length. By angles, the child distinguishes acute triangles (all angles smaller than 90°), right triangles (one right angle) and obtuse triangles (one angle greater than 90°). The curriculum points do not specify a numerical range for this; the focus is on understanding the terms and applying them correctly.

A common mistake is to name a triangle according to how the drawing looks rather than according to the given information. A triangle that looks roughly equal is then called equilateral, even though its sides have different lengths. A second typical error: it seems natural to assume that equilateral and isosceles exclude each other. In fact, every equilateral triangle is also isosceles; the general term includes the specific one. It is also often forgotten that a triangle can be named according to both criteria at once, for example as isosceles and obtuse.

In the exercises, this concept appears in the following forms, which are available as printable worksheets with solutions:

  • Type of triangle by sides: Triangles are classified according to their side lengths.
  • Type of triangle by angles: Triangles are classified according to their angle sizes.
  • Types of triangles: general and specific terms: The child places terms such as equilateral and isosceles in a relationship to each other.
  • Types of triangles: true or false: Statements about triangles are checked and judged with justification.

MA.2.A.1.i: understand and use the terms median, angle bisector, altitude, perpendicular, base line, base area, perpendicular bisector, leg, net (development), circumcircle, incircle, quadrilateral, polygon, rhombus, parallelogram, kite, trapezoid, isosceles, equilateral, obtuse, acute, point reflection, rotation, original point, image point, congruent, coordinate system, two-dimensional, three-dimensional. can label geometric objects correctly: points, image points, sides and angles of triangles and quadrilaterals.
MA.2.A.1.j: understand and use the terms x-coordinate, y-coordinate, x-axis, y-axis, unit length, lateral surface, prism, cylinder. be able to characterise triangles and quadrilaterals by their angles, parallelism, diagonals and side lengths.

Task types: Kind of triangle by its sides (grade 4–6) · Kind of triangle by its angles (grade 4–6) · Types of triangles: true or false (grade 4–6) · Types of triangles: which names include others (grade 4–6)

Recognizing and naming quadrilaterals

Your child learns to name quadrilaterals based on their properties, for example by their parallel sides, angles, diagonals and side lengths.

Create a worksheet →

Description and task types

Your child can name quadrilaterals by checking which properties a shape has: whether opposite sides are parallel, which angles occur, and whether the sides are equal in length. The curriculum points name terms such as parallelogram, rhombus, kite and trapezium for this. They do not specify a number range, because this is about shape and properties rather than calculation.

It is typical for children to name a shape by how it looks rather than by its properties. A quadrilateral appears to have parallel sides even though they are not parallel, or a square is treated as something other than a rectangle. The reason: the name depends on the property, not on the first impression. Anyone who does not check the sides will count the pairs of parallel sides incorrectly.

The worksheets in this area include four types of task: What is this quadrilateral called?, Pairs of parallel sides: true or false, How many pairs of parallel sides are there? and Is a square also a rectangle?. The solutions are included for each, so you can follow your child's answers well.

MA.2.A.1.i: understand and use the terms median, angle bisector, altitude, perpendicular, base line, base area, perpendicular bisector, leg, net (development), circumcircle, incircle, quadrilateral, polygon, rhombus, parallelogram, kite, trapezoid, isosceles, equilateral, obtuse, acute, point reflection, rotation, original point, image point, congruent, coordinate system, two-dimensional, three-dimensional. can label geometric objects correctly: points, image points, sides and angles of triangles and quadrilaterals.
MA.2.A.1.j: understand and use the terms x-coordinate, y-coordinate, x-axis, y-axis, unit length, lateral surface, prism, cylinder. be able to characterise triangles and quadrilaterals by their angles, parallelism, diagonals and side lengths.

Task types: Pairs of parallel sides: insert the sign (grade 4–6) · Pairs of parallel sides: true or false (grade 4–6) · Quadrilaterals: how many pairs of parallel sides? (grade 4–6) · What is this quadrilateral called? (grade 5–6) · Quadrilaterals: is a square also a rectangle (grade 5–6)

Pyramids: Calculating Volume and Surface Area

Your child calculates the volume and surface area of square pyramids and also determines missing heights in the process.

Create a worksheet →

Description and task types

Your child calculates the volume and surface area of pyramids, especially square pyramids. To do this, they substitute given quantities such as base edge and height into the appropriate formulas. They can also determine a missing height from the other given information. The curriculum does not specify a concrete range of numbers for this point.

Typical mistakes arise in two places. First, the slant height of a lateral face is confused with the height of the pyramid. The pyramid's height is perpendicular to the base, whereas the slant height lies in a lateral face. Second, the factor 1/3 is forgotten when calculating the volume, so the result turns out three times too large. When calculating the surface area, a lateral face or the base is often not included in the count.

For this topic, there are the following types of tasks, each with a worksheet and solution:

  • Pyramid: the missing height – calculate a height from the other given information; this often requires the Pythagorean theorem.
  • Surface area of a pyramid: choose the result – recognise the correct result among several answers.
  • Surface area of a square pyramid – add together the base and all lateral faces.
  • Volume of a pyramid: select the result – recognise the correct volume among several answers.
  • Volume of a square pyramid – base area times height, divided by three.

MA.2.A.3.j: can calculate lengths, areas and volumes of pyramids, cones and spheres. can determine angles based on angle sums, Thales' theorem, similarity and congruence.
MA.2.B.2.g: can explain volume formulas for prisms and pyramids (e.g. decompose a cube into pyramids by cuts and determine their volume). can substantiate theorems of plane geometry with examples and follow their proofs (e.g. Pythagorean theorem, inscribed angle theorem, Thales' theorem).

Task types: Surface area of a square pyramid (grade 8) · Volume of a pyramid step by step (grade 8) · Volume of a pyramid: choose the result (grade 8) · Volume of a pyramid: extra data (grade 8) · Volume of a square pyramid (grade 8) · Pyramid: the missing height (grade 8) · Surface area of a pyramid: choose the result (grade 8)

Measuring angles with a protractor

The child learns to measure the size of an angle with a protractor and to read the value correctly.

Create a worksheet →

Description and task types

At the end of Year 7, the child should be able to measure angles with a protractor. The curriculum does not specify a particular numerical range for this. However, the tasks in this area show what is concretely required: reading an angle on a protractor, choosing the appropriate angle size, and judging statements about a measurement as right or wrong.

A typical mistake occurs when reading the value. A protractor has two oppositely labelled degree scales. If you read the wrong scale, you get the value that is supplemented to 180°: an angle of 130° is then read as 50°. It is therefore helpful to ask whether the angle is acute or obtuse before noting the value.

The following task types are mainly provided for this area:

  • Read an angle on a protractor: The child reads the number of degrees of an angle on a protractor.
  • Protractor: choose the angle size: The child chooses the correct angle size from several options.
  • Protractor: true or false: The child checks a measurement or statement and judges whether it is correct.

MA.2.C.2.g: can trace, describe and check folds, sketches and drawings. can transfer angles and measure angles with a geometry set square. can draw, modify and arrange shapes using a computer. can enter commands for drawing shapes in a programming environment, modify them and describe their effects (e.g. forward, turn left, forward).

Task types: Read the angle on the protractor (grade 4–5) · Protractor in context: measure the angle (grade 4–5) · Protractor – how much is missing to 180°: find the mistake (grade 5–6) · Protractor – how much is missing to 180°: insert the sign (grade 5–6) · Protractor: choose the angle measure (grade 4–5) · Protractor: difference from a right angle (grade 5–6) · Protractor: find the mistake (grade 4–5) · Protractor: how much is missing to 180° (grade 5–6) · Protractor: how much is missing to 180°: choose the result (grade 5–6) · Protractor: how much is missing to 180°: true or false (grade 5–6) · Protractor: insert the sign (grade 4–5) · Protractor: true or false (grade 4–5)

Distance between points with the same coordinate

Your child determines the distance between two points that have the same x- or y-coordinate by calculating the difference in the other coordinate.

Create a worksheet →

Description and task types

Your child learns to determine the distance between two points in the coordinate system when both have the same x-coordinate or the same y-coordinate. The points then lie on a common vertical or horizontal grid line, and the distance is the difference in the other coordinate. For example, A(2 | -3) and B(2 | 5) have the same x-coordinate 2, and their distance is 5 - (-3) = 8. The underlying curriculum objective includes figures with negative and non-integer coordinates; which specific numbers appear in Year 7 is shown by the tasks on the worksheet.

A typical mistake occurs with negative values: instead of calculating the distance across zero, the numbers are subtracted from each other without their signs. From -3 to 5, 5 - 3 = 2 is obtained instead of 8. A second common error is counting grid squares: here the points themselves are counted as well, so the result is one too large or one too small.

The exercises on this topic consist of three types of tasks:

  • Distance between points with the same coordinate: The distance is calculated for two given points.
  • Distance on a grid line: true or false: Given distances are checked and judged as true or false.
  • Common coordinate: choose the number: The number that places two points on the same grid line is identified.

MA.2.C.4.d: can draw figures in a coordinate system, shift them horizontally and vertically, and state the coordinates of their vertices.
MA.2.C.4.i: can represent figures in the Cartesian coordinate system (including with negative and non-integer coordinates). can calculate distances and areas in a coordinate system.

Task types: Distance along a grid line: find the mistake (grade 6) · Distance along a grid line: true or false (grade 6) · Distance between aligned points (grade 6) · Shared coordinate of two points: choose it (grade 6)

Converting Area and Volume Units

Children convert area units such as km², m², dm², cm², as well as hectares and ares, into one another, and convert volume units into smaller units.

Create a worksheet →

Description and task types

In Grade 7, children convert between area units ranging from square kilometres to square millimetres. This also includes hectares and ares: 1 ha = 100 a and 1 a = 100 m². For volume, the units go down to cubic millimetres. The tasks in this grade mainly require conversion into smaller volume units, for example 2 dm³ = 2000 cm³.

A typical mistake is to carry over the rule for lengths. Because 1 m = 10 dm, many children think that 1 m² = 10 dm² is also correct. In fact, 1 m² = 100 dm², because an area has two dimensions. For volume, each step adds a factor of 1000 (1 dm³ = 1000 cm³). As a result, the numbers are often off by a factor of 10 or 100.

Typical tasks on the worksheets are:

  • Converting into a larger or smaller area unit, for example 2.5 dm² into cm²
  • Converting hectares into ares and converting ares into square metres
  • Converting into a smaller volume unit
  • Comparing area units, where quantities such as 3 m² and 350 dm² are placed side by side
  • Choosing the appropriate conversion and deciding whether statements are right or wrong

Printable solutions are available for all tasks.

MA.3.A.1.h: understand and use the terms proportionality, area, volume, capacity, mean, pie chart, bar chart, line graph, data, frequency, chance, memory. can orient themselves to reference quantities: 1 m², 1 dm², 1 cm², 1 mm², 1 bit, 1 byte, 1 kB. can name units of measurement and use their abbreviations: area units (km², m², dm², cm², mm²), time (d, h, min, s).
MA.3.A.1.i: can orient themselves by reference quantities: 1 m³, 1 dm³, 1 cm³. can understand and use prefixes: mega, giga, tera.
MA.3.A.1.j: understand and use the terms coordinate system, currency, arithmetic mean (extension: inverse proportionality). can use units of measurement and their abbreviations and orient themselves to reference quantities: area measures (km², ha, a, m², dm², cm², mm²), volume measures (km³, m³, dm³, cm³, mm³), money (CHF, €, $).
MA.3.A.2.i: can estimate areas and volumes [m³] in a suitable unit of measure and convert them into neighbouring units of measure. can compare quantities in absolute and relative terms (e.g. 120 pieces or 60% or ⅗ of a quantity). can measure distances and durations for speed calculations.

Task types: Convert ares to square metres (grade 5–6) · Convert hectares to ares (grade 5–6) · Convert to a larger unit of area (grade 5–6) · Convert to a smaller unit of area (grade 5–6) · Convert to a smaller unit of volume (grade 5–6) · Units of area: choose the conversion (grade 5–6) · Units of area: find the mistake (grade 5–6) · Units of area: true or false (grade 5–6) · Units of area: compare the quantities (grade 5–6)

Calculating with Money: Budget and the Better Deal

Your child learns to add and subtract amounts in francs and centimes, to calculate a budget, and to compare offers based on their price.

Create a worksheet →

Description and task types

Your child learns to form, add and subtract amounts of money in francs and centimes (Rappen), for example 25 Fr. 60 Rp. + 14 Fr. 30 Rp. The examples in the curriculum range from a few francs up to about 125 francs. It is also important that your child can interpret a calculation: the sequence 125 Fr. + 4 Fr. + 4 Fr. + 4 Fr. − 34 Fr. means, for example, "savings, pocket money, then buying a ball". Your child should also be able to estimate and round results in order to check them.

A typical mistake involves the Rappen. Anyone who reads 2 Fr. 5 Rp. as 2.5 francs has paid too little: it is 2 Fr. 50 Rp. Similarly, when adding, Rappen over 100 are sometimes not converted into francs. In budgeting, expenses are also often lost because not all items are subtracted.

In class, your child will mainly encounter these types of tasks, which are available as printable worksheets with solutions:

  • Compare offers: Which is cheaper?
  • Money word problem: How much is left after the shopping?
  • Budget: Choose how much is left over.
  • Budget: True or false?
  • The cheaper offer: Choose the unit price, because with packs only the price per item shows what is really cheaper.
  • The cheaper offer: True or false?

MA.3.A.1.j: understand and use the terms coordinate system, currency, arithmetic mean (extension: inverse proportionality). can use units of measurement and their abbreviations and orient themselves to reference quantities: area measures (km², ha, a, m², dm², cm², mm²), volume measures (km³, m³, dm³, cm³, mm³), money (CHF, €, $).
MA.3.A.2.d: can form, add and subtract amounts of money in Fr. and Rp. (e.g. form 20 Fr. with 2 · 5 Fr. + 5 · 2 Fr.; 25 Fr. 60 Rp. + 14 Fr. 30 Rp.). can determine analogue and digital times.
MA.3.A.2.h: can estimate, determine, compare and round measures (money, lengths, weight or mass, time, volume [l]), calculate with them, convert them into neighbouring units of measurement, and write them in compound units.
MA.3.C.3.e: can give meaning to arithmetic expressions and tables (e.g. 125 Fr. + 4 Fr. + 4 Fr. + 4 Fr. - 34 Fr. → 125 Fr. savings. 3 weeks at 4 francs pocket money each. Purchase of a ball for 34 Fr.).

Task types: Budget: find the mistake (grade 4–6) · Budget: true or false (grade 4–6) · Budget: choose how much is left (grade 4–6) · Money word problem: how much is left after shopping (grade 4–6) · The better offer: find the mistake (grade 4–6) · The better offer: true or false (grade 4–6) · Comparing offers: word problem, which is the better deal (grade 4–6) · Shopping with cents: estimate, then the change (grade 4–5) · The better offer: choose the price of one item (grade 4–6)

Comparing numbers: by how much and how many times

The child learns to compare two numbers in two ways: by the difference (how much bigger is one of them?) and by the quotient (how many times as big is it?).

Create a worksheet →

Description and task types

In grade 7, the child compares two numbers or quantities, such as population figures, and answers the question by how much one is greater, or how many times as large it is. The curriculum point for this gives numbers such as 12 000 and 30 000 people as an example. It applies to a longer stage than just this grade. The tasks in this grade mainly show what is concretely required here.

It is typical that children mix up the two questions. To "how many times as large", they answer with a difference, such as "18 000 more", instead of with the ratio. A second common mistake: one compares only the total numbers. In an example with 12 000 people and 2 toy shops, each shop has 6 000 people. With 30 000 people and 8 shops, it is only 3 750. Anyone who only compares 30 000 with 12 000 overlooks that the number per shop is reversed.

In class, the child encounters this type of task in the following templates:

  • Comparison by difference: by how much larger
  • Comparison by quotient: how many times larger
  • Comparison by quotient: how many times as many (word problem)
  • A number that is k times as large
  • How many times as large: choose the answer
  • By how much a number is larger: choose the answer

MA.3.A.3.f: can determine and compare shares (e.g. in X with 2 toy shops live 12 000 people; in Y with 8 toy shops live 30 000 people).

Task types: A number k times as large (grade 4–5) · Comparison by difference: how much greater (grade 4–6) · Comparison by ratio: how many times as large (grade 4–6) · Comparison by ratio: how many times as many (word problem) (grade 4–6) · How many times as large: choose the answer (grade 4–5) · How much greater one number is: choose the answer (grade 4–6)

Slope and y-intercept of straight lines

Your child learns to read off the slope and the y-intercept of a straight line, or to calculate them from two points.

Create a worksheet →

Description and task types

Your child can read the y-intercept of a linear function, that is, the point where the line crosses the y-axis, and determine the slope. In addition, it calculates the slope of a straight line from two given points. The curriculum for the whole grade level also includes drawing the graph and the zero of the function. The practice worksheets for Grade 7 in this area do not cover these two parts.

Slope and y-intercept are often confused. The slope shows how steeply the line rises or falls for each step to the right, while the y-intercept only shows where it meets the y-axis. When working with two points, the following often happens: if only one of the two orders of subtraction is reversed in the differences, the sign is wrong. For lines that fall, the minus sign is sometimes missing.

Examples of tasks on this topic are:

  • Reading the y-intercept from a graph
  • Reading the slope from a graph
  • Slope of a straight line through two points
  • Slope: choose the result
  • Linear function: y-intercept: choose the answer

MA.3.A.3.k: Be able to draw the graph of linear functions and determine the slope, the y-intercept and the zero.

Task types: Linear function: intercept from graph: choose the answer (grade 8) · y-intercept from a graph (grade 8) · Slope from a graph (grade 8) · Slope through two points (grade 8) · Slope: choose the result (grade 8)

The zero: where the graph crosses the x-axis

The child learns to determine the zero of a linear function: the x-value at which the function value is zero and the graph intersects the x-axis.

Create a worksheet →

Description and task types

In Year 7, children should be able to determine the zero of a linear function. This means the x-value at which the function value is equal to zero. In the graph, this is the point where the line crosses the x-axis. This curriculum point also includes drawing the graph and recognising the slope and the y-intercept. The example tasks show which numbers are involved.

A typical mistake is confusing it with the y-intercept. Both points lie on an axis, and often the calculation is done with x = 0 instead of y = 0. Then the y-intercept comes out, not the zero. A helpful question: On which axis does the point we are looking for lie?

Tasks on this topic include, for example:

  • Zero of a linear function: determine the point at which the graph crosses the x-axis.
  • Linear function: the argument for a function value: for a given function value, find the matching x-number.
  • Zero: true or false: classify statements about zeros as true or false.
  • Argument of the function: choose the number: select the correct x-number from given numbers.

MA.3.A.3.k: Be able to draw the graph of linear functions and determine the slope, the y-intercept and the zero.

Task types: Input of a function: choose the number (grade 8) · Zero of a function: find the mistake (grade 8) · Zero of a function: insert the sign (grade 8) · Zero of a function: true or false (grade 8) · Zero of a linear function (grade 8) · Zero of a linear function: extra data (grade 8) · Linear function: the input for a given output (grade 8)

Reading data from tables and charts

The child reads values from tables and bar charts, compares them, and checks statements with their own calculations.

Create a worksheet →

Description and task types

The child can read values from tables and column charts, ask their own questions about them and answer them with a calculation. For example, they compare two rows, determine the difference between the largest and smallest value, and check whether a statement about the data is true. The curriculum points do not name a fixed number range for this, but give everyday examples such as school routes, pets or prices.

A typical mistake is reading from the wrong row, column or category. With column charts, the scale is often overlooked: a bar does not automatically stand for a quantity of 1 if one square represents several units. With the question "how much more", a ratio is sometimes calculated instead of a difference, i.e. "twice as much" instead of "how much more". Often the mistake already lies in the exact reading of the question.

In the worksheets on this topic, reading questions typically appear in these forms:

  • Table: how much more according to the table?
  • Table: difference between the largest and smallest value
  • Table: how many groups lie above the number?
  • Table: which category has the most?
  • Column chart: how many more
  • Difference between two rows: choose the correct answer
  • Difference between two rows: true or false

MA.3.B.1.i: can check results and statements about functional relationships, in particular by interpreting tables, graphs and diagrams (e.g. the commute by bicycle and train from X to Y takes less time and is cheaper than the journey by car).
MA.3.B.2.b: can systematically combine and vary (e.g. pairings with 6 children). can pose and answer questions about statistical data (e.g. the longest route to school is more than twice as long as the shortest; most children live less than 1 km away from school).
MA.3.C.1.b: can collect, record, order and interpret frequencies, lengths and prices (e.g. tally lists of dice throws; body heights). can represent quantities from the environment (e.g. 7 blond children with 7 squares, 5 brown-haired children with 5 squares).
MA.3.C.1.d: can represent and interpret data on lengths, capacities, weights, durations, quantities and prices in tables and diagrams (e.g. on pets). can carry out random experiments, record results and interpret them (e.g. throw two dice 50 times).
MA.3.C.1.e: can collect, sort, represent and interpret data statistically (e.g. school routes: distance, means of transport, duration).
MA.3.C.1.j: can establish relationships between different quantities based on data (e.g. the connection between distance run and winning in football). can work on social (e.g. accident prevention), economic (e.g. interest, discount, leasing) and ecological (e.g. water consumption, waste disposal) questions and compare numerical data in absolute and relative terms.
MA.3.C.2.d: can ask questions about texts, tables and diagrams, carry out their own calculations, and interpret and check the results.

Task types: Bar chart: how many more (grade 2–4) · Table: how many more, from the table? (grade 2–4) · Table: which category has the most? (grade 2–4) · Difference between two rows: choose the correct answer (grade 2–4) · Difference between two rows: true or false (grade 2–4) · Table: how many groups are above the given number? (grade 2–4) · Table: the gap between the largest and the smallest (grade 2–4)

Counting Possibilities Systematically

The child learns to write down all possibilities of a combination in an orderly way and so reliably count how many pairs or combinations there are.

Create a worksheet →

Description and task types

The child learns to write down all possibilities in combinations in an orderly way and then count them, for example how many pairs can be formed from two sets. The curriculum points give examples from a longer period, such as two-digit numbers using the digits 1, 2, 3, or pairings of six children. For Grade 7, the tasks in this subject area show what is concretely practised.

It is typical for children to note down the possibilities without a plan and in doing so overlook a combination or count one twice. A fixed procedure helps, for example listing all possibilities with the first part first, then with the second part, and so on. Someone who only estimates and does not check the list for completeness often gets a wrong number and does not notice the error.

The tasks in this subject area ask, for example:

  • How many different pairs are possible?
  • How many different combinations are possible?
  • How many combinations result from three kinds?
  • Write down all the combinations.
  • How many pairs remain if one part breaks, or how many come about when an additional part is added?
  • If the number of pairs is known: how many parts does the other set have?

MA.3.B.2.a: can vary, order and record arrangements (e.g. two-digit numbers with the digits 1, 2, 3; equally long paths on a schematic city map; seating arrangements of three children). can assess the influenceability of situations (e.g. influenceability of the weather; influenceability of the duration of the journey to school).
MA.3.B.2.b: can systematically combine and vary (e.g. pairings with 6 children). can pose and answer questions about statistical data (e.g. the longest route to school is more than twice as long as the shortest; most children live less than 1 km away from school).
MA.3.B.2.c: can explore countable combinations and permutations, record observations and check statements (e.g. combinations of numbers on a bicycle lock; permutations with the letters ADEN, ADNE, AEDN, ...).
MA.3.B.2.d: can systematically write down all possibilities in countable variations and combinations (e.g. numbers with the digits 1, 2, 3 with and without repetition: 123, 132, 213, 231, 312, 321, 112, 121, 211, ...).

Task types: Combinations: how many different pairs can you make? (grade 2–4) · How many different pairs: choose the correct answer (grade 2–4) · How many different pairs: true or false (grade 2–4) · List all the combinations (grade 2–4) · Combinations: how many combinations from three kinds? (grade 3–4) · Combinations: how many more pairs after adding one? (grade 3–4) · Combinations: how many pairs are left without one item? (grade 3–4) · Known number of pairs: how many in the other set (grade 3–4)

More about this grade

What do students learn in 7th grade mathematics?

In Year 7, the 3rd cycle begins: negative numbers and the basic operations with rational numbers, multiplying and dividing fractions, powers, prime factors, and the order of operations (multiplication and division before addition and subtraction). Terms with variables are simplified and equations are solved. In geometry: measuring and calculating angles, classifying triangles and quadrilaterals, the area of triangles, parallelograms and trapezoids, and constructions with compass and set square with protractor. In addition, percentage calculations, scale, and first probabilities.

On the curriculum: The basis is the Lehrplan 21, Mathematics subject area (template of the German-speaking Swiss Conference of Cantonal Ministers of Education, revised version of 29.02.2016). It describes competencies not year by year but in cycles; Year 7 belongs to the 3rd cycle (Years 7 to 9). The assignment of the tasks to Year 7 comes from us and follows the usual structure of the subject matter. The competency levels of the cycle are quoted verbatim in the block below; cantonal curricula may differ slightly.

Curriculum alignment

Each row is a standard of the curriculum, worded as in the official source linked below, with our topics for it.

StandardOur topics
MA.1.A.1 · The students understand and use arithmetic terms and symbols. They read and write numbers.
MA.1.A.1.h Understand and use the terms equation, bracket, prime number. Can use the symbols +, -, /, *, =, x², (), ≠ and use calculators accordingly. Can convert fractions (denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000), decimal numbers and percentages each into the two other notations. Writing fractions as decimal numbers · Writing decimal numbers as fractions
MA.1.A.1.i understand and use the terms term, variable, unknown, raised to, power, power of ten, sign, positive numbers, negative numbers, (square) root. Extension: understand and use the terms base, exponent. can use the symbols √, ≤, ≥ and use calculators accordingly. can read and write numbers up to 1 billion. Calculating Powers of Fractions and Integers · Extracting roots: square and cube roots · Numbers to the left and right of zero on the number line
MA.1.A.1.j can read and write numbers in scientific notation with positive exponents (e.g. 1.32 · 10⁸ = 132 000 000). can read and write powers with a rational base and a natural exponent. Numbers in Scientific Notation · Calculating Powers of Fractions and Integers
MA.1.A.1.k understand and use the terms natural numbers, integers, rational numbers, reciprocal, 3rd root. can read and write numbers in scientific notation, including with negative exponents. Negative Exponents: Powers as Fractions
MA.1.A.1.l understand and use the terms real numbers, irrational numbers. Estimating and rounding roots
MA.1.A.2 · Students can count flexibly, order numbers by size and estimate results.
MA.1.A.2.h can estimate sums and differences of decimal numbers (e.g. 0.723 - 0.04 ≈ 0.7; 23'268 + 4'785 ≈ 28'000). can estimate results in percentage calculations (e.g. 263 of 830 is about 30%; 45% of 13'000 is more than 5'000). Estimate results beforehand: rough estimation in advance
MA.1.A.2.i Extension: can estimate products and quotients of decimal numbers. (e.g. 0.382 : 42.8 → 0.4 : 40 = 0.4 : 4 : 10 = 0.01; 32.7 : 0.085 → 30 : 0.1 = 300 : 1 = 300). Estimate results beforehand: rough estimation in advance
MA.1.A.2.j can order positive and negative rational numbers on the number line. Comparing and ordering whole numbers · Numbers to the left and right of zero on the number line
MA.1.A.3 · The students can add, subtract, multiply, divide and exponentiate.
MA.1.A.3.g can multiply decimal numbers with up to 5 significant digits and check the results (mentally or by noting their own calculation methods, e.g. 308 · 52; 12 · 0.3). can multiply fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100 using the rectangle model. can write fractions with the denominators 2, 3, 4, 5, 6, 8, 10, 20, 50, 100, 1'000 as decimal numbers. can determine how many times unit fractions are contained in whole numbers (e.g. How many times is ⅕ contained in 2? → 2 : ⅕). Multiplying Decimal Numbers: Placing the Decimal Point Correctly · Multiplying in writing: multi-digit numbers · Multiplying Fractions: Rectangle and Result · Writing fractions as decimal numbers · Dividing unit fractions: How many times does it fit?
MA.1.A.3.h Can perform percentage calculations with a calculator. Extension: can decompose natural numbers into prime factors. Calculate percentages: how much is 7% of 35? · What Percentage One Number Is of Another · Factorizing numbers into prime factors
MA.1.A.3.i can perform the basic operations with rational numbers. can calculate roots and powers with a calculator (e.g. 4³ · 4³ = 4'096; 4³ + 4³ = 128; ³√8000). Extension: can perform the basic operations with common fractions involving variables and substitute numbers for them: a/b + c/d; a/b − c/d; a/b · c/d; a : c/b : d = a/c · b/d. Adding and Subtracting Signed Decimal Numbers · Dividing Decimal Numbers: Moving Commas Correctly · Calculating Powers of Fractions and Integers
MA.1.A.3.j can transform and calculate terms with powers and square roots (e.g. √2 + √2 = 2√2 = √8; √(2³) · √3 = √24 = 2√6). can add, subtract, multiply, divide numbers in scientific notation. Partial Root Extraction: Taking Factors Out of the Root · Power Laws: Calculating with Exponents · Numbers in Scientific Notation
MA.1.A.4 · The students can compare and transform terms, solve equations, apply laws and rules.
MA.1.A.4.h can solve equations with variables by substitution or inverse operations. can follow the calculation rules "multiplication before addition" and the bracket rules (e.g. 4 + 8 - 2 · 3 = 6; (4 + 8 - 2) · 3 = 30; 4 + (8 - 2) · 3 = 22). Extension: can use divisibility rules for 3, 4, 6, 8, 9, 25, 50 and determine divisors of natural numbers. Solving Simple Equations with One Variable
MA.1.A.4.i can write a product with equal factors as a power and vice versa (e.g. 15 · 15 · 15 = 15³ ; a · a · a · a = a⁴). can apply the distributive law when transforming terms (e.g. a · (b + c) = a · b + a · c = ab + ac). can round calculation results sensibly. Extension: understand the conventions for the notation of algebraic terms (e.g. abc = a · b · c but 789 ≠ 7 · 8 · 9). Square and Cube Numbers: Understanding Powers · Removing brackets and factoring out · Rounding decimal numbers: to tenths and hundredths
MA.1.A.4.j Extension: can solve linear equations with one variable using equivalence transformations (e.g. 5x + 3 = 7). Extension: can add and subtract polynomials (e.g. 3(a² + 2b) - 2(a² + b) = a² + 4b). Extension: can expand terms and factor out (factorisation). Extension: can interpret equations in words (e.g. x = y + 1 → x is 1 greater than y) and translate word problems into equations. Extension: can transform or meaningfully simplify terms with variables (factoring out, expanding, cancelling and sign rules). Solving Equations with Two Steps · Solving Equations with x on Both Sides · Simplify Terms with Variables · Removing brackets and factoring out · Translating text descriptions into terms
MA.1.A.4.k can add and subtract terms with variables (e.g. a + 2a + b + 3b + ¼ + ⅜ = 3a + 4b + ⅝). Simplify Terms with Variables
MA.1.A.4.l can solve quadratic equations by factorization (e.g. x² - 4 = 0). can transform terms with binomials, applying the binomial formulas (e.g. 4a² + 12ab² + 9b⁴ = (2a + 3b²)²). can apply the calculation rules a^x · a^y = a^(x+y) as well as powers before multiplication before addition.
MA.1.A.4.m can transform fraction terms with binomials. can apply the laws of arithmetic to terms with powers and roots as well as to numbers in scientific notation. can solve fractional equations with the unknown in the denominator (e.g. 3/x + 2 = 4/x + 3) and equations with a parameter (e.g. ax + a = 7). can solve systems of linear equations with 2 unknowns. Power Laws: Calculating with Exponents · Partial Root Extraction: Taking Factors Out of the Root · Solving two equations together · Solving Equations with x on Both Sides
MA.1.B.1 · The students can explore number and operation relationships as well as arithmetic patterns and exchange findings.
MA.1.B.1.i can use heuristic strategies: clarify the problem by asking questions, vary systematically, compare with familiar tasks, make assumptions, exchange solution approaches. can explore and describe relationships between rational numbers (e.g. the distances between the unit fractions ½, ⅓, ¼, ... on the number line; Extension: the growth of quotients as the divisors become smaller, 4 : 2, 4 : 1, 4 : 0.5 ...). can explore arithmetic relationships by systematically varying numbers, place values and operations and record observations (e.g. 10 : 9 = 1 R1, 100 : 9 = 11 R1, 1'000 : 9 = ...).
MA.1.B.1.j can use heuristic strategies: check conjectures, work forwards, work backwards, look back. Extension: can create, continue, change and describe arithmetic patterns algebraically (e.g. 1 · 4 - 2 · 3 / 2 · 5 - 3 · 4 / 3 · 6 - 4 · 5 / ... → a · (a + 3) - (a + 1)(a + 2)).
MA.1.B.1.k are able to explore arithmetic and algebraic relationships, transfer structures to other number examples and record observations (e.g. 10² + 10 + 11 = 11²; 11² + 11 + 12 = 12²).
MA.1.B.1.l can systematically vary numbers, digits and operations, formulate observations and relate them to terms with letters (e.g. When does a · b · c < 100a + 10b + c hold? Find examples and counterexamples). Disprove with a Counterexample · Evaluate terms: calculate values
MA.1.B.2 · Students can explain, verify and justify statements, conjectures and results about numbers and variables.
MA.1.B.2.h can investigate, justify or refute statements about arithmetic regularities (e.g. an odd sum results from adding an even and an odd number; the products of four consecutive numbers are divisible by 24). can investigate and justify the number of decimal places in products and quotients of decimal numbers (e.g. with a calculator). Disprove with a Counterexample · Multiplying Decimal Numbers: Placing the Decimal Point Correctly
MA.1.B.2.i Extension: can check equivalent transformations with control calculations. Checking whether a number solves the equation
MA.1.B.2.j can check algebraic statements by substituting numbers (e.g. a³ + 5a is divisible by 6: 4³ + 5⋅4 = 84 → 84 : 6 = 14; a^(2b) = (a²)^b; 2⁶ = (2²)³ = 2²˙³ = 4³; 2⁸ = 4⁴; 3⁴ = 9²). Evaluate terms: calculate values
MA.1.B.2.k can justify results by generalising (e.g. the square of a number is 1 greater than the product of the two neighbouring numbers: 4 · 4 - 1 = 3 · 5 → a² - 1 = (a - 1)(a + 1)). can check term and equivalence transformations.
MA.1.B.3 · Pupils can use aids when exploring arithmetic patterns.
MA.1.B.3.e can use electronic media when exploring arithmetic structures (e.g. converting 1/11, 2/11, 3/11, ... into periodic decimal numbers and examining the sequence of digits).
MA.1.B.3.f can use electronic media to collect, sort and represent data (spreadsheet program).
MA.1.B.3.g can use formula collections, reference books and the internet to solve numerical tasks and to explore structures. can apply templates in a spreadsheet program.
MA.1.B.3.h can use a spreadsheet program to solve equations by systematic variation and to enter or use formulas (e.g. A = ½(s·h)
MA.1.C.1 · The students can present, describe, exchange and follow calculation methods.
MA.1.C.1.g can represent and describe sums, differences and products of fractions and of decimal numbers with suitable models (e.g. product: ⅓ of ¾ with the rectangle model; sum: ½ + ¼ with the circle model). Multiplying Fractions: Rectangle and Result · Adding and subtracting fractions with unlike denominators
MA.1.C.1.h can represent and describe operations with numbers and variables (e.g. 18 · 22 = (20 - 2)(20 + 2) → (a - b)(a + b) as an area) and generalize them.
MA.1.C.1.i can distinguish between exact and rounded results. decide, depending on the situation, whether to operate with rounded or exact values (e.g. √2 or 1.41). Rounding decimal numbers: to tenths and hundredths · Estimating and rounding roots
MA.1.C.2 · Students can illustrate, describe and generalize quantities, number sequences and terms.
MA.1.C.2.h can express number puzzles mathematically and invent them (e.g. if you triple a number and increase it by 3, the result is 33). can describe figure sequences numerically (e.g. the number of visible faces in towers of dice with 1, 2, 3, 4, ... dice). Translating word problems into equations · Continuing Number Sequences According to a Rule
MA.1.C.2.i can describe relationships between expressions and figures (e.g. interpret n(n+1) as a rectangle; represent the sum of the first n odd numbers as a square: 1 + 3 + 5 + 7 = 4 · 4). can form expressions for lengths of line segments, areas and volumes and interpret corresponding expressions. can illustrate arithmetic and algebraic expressions, especially with text, symbols and sketches (e.g. the product of two binomials, the sum of three consecutive numbers). can generalise arithmetic regularities with expressions containing letters (e.g. 3(4 + 5) = 3 · 4 + 3 · 5 → a(b + c) = ab + ac). Extension: can formulate arithmetic structures algebraically (e.g. the products 2 · 3 · 4 / 3 · 4 · 5 / 5 · 6 · 7, ... are divisible by 6 → a(a + 1) · (a + 2) · ⅙ is an integer). Translating text descriptions into terms · Removing brackets and factoring out · Evaluate terms: calculate values
MA.1.C.2.j can interpret terms geometrically (e.g. a² · b as a cuboid with a square base, a · b as a rectangle with side lengths a and b, and a + b as the sum of two line segments). can translate linear figure sequences into a term (e.g. the number of matchsticks needed to lay a row of n equilateral triangles as 2n + 1). Translating text descriptions into terms
MA.1.C.2.k can numerically verify or illustrate statements about number sequences and terms (e.g. ½n(n+1) + ½(n+1)(n+2) is a square number, n = 1 → 1 + 3 = 4, n = 2 → 3 + 6 = 9, ... n = 6 → 21 + 28 = 49). can recognise linear, quadratic and exponential growth in terms, number sequences and graphs and describe differences. Evaluate terms: calculate values
MA.2.A.1 · The students understand and use terms and symbols.
MA.2.A.1.h understand and use the terms coordinates, view, side view, top view, front view. Reading points in the coordinate system
MA.2.A.1.i understand and use the terms median, angle bisector, altitude, perpendicular, base line, base area, perpendicular bisector, leg, net (development), circumcircle, incircle, quadrilateral, polygon, rhombus, parallelogram, kite, trapezoid, isosceles, equilateral, obtuse, acute, point reflection, rotation, original point, image point, congruent, coordinate system, two-dimensional, three-dimensional. can label geometric objects correctly: points, image points, sides and angles of triangles and quadrilaterals. Naming triangles by sides and angles · Recognizing and naming quadrilaterals · Understanding Perpendicular Bisectors and Angle Bisectors
MA.2.A.1.j understand and use the terms x-coordinate, y-coordinate, x-axis, y-axis, unit length, lateral surface, prism, cylinder. be able to characterise triangles and quadrilaterals by their angles, parallelism, diagonals and side lengths. Reading points in the coordinate system · Naming triangles by sides and angles · Recognizing and naming quadrilaterals
MA.2.A.1.k understand and use the terms congruence(-mapping), base, cone, prism, pyramid, π. Congruent Triangles and Their Angles
MA.2.A.1.l understand and use the terms tetrahedron, space diagonal, height of the solid, slant height, circular sector, vertex, similarity, hypotenuse, leg, tangent, chord. can describe solids by their properties (lengths of line segments, parallelism of line segments, angles between line segments and surfaces, surface area, volume, space diagonals, net, number and shape of the lateral faces, vertices and edges). Corners, Edges and Faces of Prisms and Pyramids
MA.2.A.2 · Students can depict, decompose and compose figures and bodies.
MA.2.A.2.g can draw lines and figures enlarged, reduced, reflected and shifted with a set square, and recognise corresponding transformations. Axial Reflection: Points and Mirror Images
MA.2.A.2.h can shapes on grids rotate them by 90°, 180° (point reflection) and 270° and recognise corresponding transformations. Point Symmetry: Reflecting Figures About a Point · Moving, rotating and stretching in the coordinate system
MA.2.A.2.i can use a set square and ruler to reflect figures in an axis or a point, translate them, and rotate them by 90°, 180° and 270° using a compass and set square. Point Symmetry: Reflecting Figures About a Point · Axial Reflection: Points and Mirror Images
MA.2.A.2.j can scale figures and cuboids given a scale factor and a center of scaling. can carry out and modify mappings in the coordinate system according to instructions (e.g. x-coordinates remain constant, y-coordinates are doubled). Moving, rotating and stretching in the coordinate system
MA.2.A.3 · The students can determine and calculate lengths, areas and volumes.
MA.2.A.3.f can calculate the volume of cuboids. can approximately determine the area of non-rectangular figures on grids (e.g. counting the number of unit squares in a circle). Calculating the Volume of Cuboids · Calculating areas by decomposing shapes
MA.2.A.3.g can decompose polygons and right prisms to calculate areas and volumes. can calculate the area of triangles and quadrilaterals. can calculate edge lengths, side faces and volumes of cuboids. Calculating areas by decomposing shapes · Calculating the Area of Triangles · Calculating the Area of a Parallelogram · Calculating the Area of Trapezoids · Volume and surface area of prisms
MA.2.A.3.h can calculate lengths and areas using the Pythagorean theorem. can use formulas and spreadsheets in geometric calculations. Pythagorean theorem in a right-angled triangle
MA.2.A.3.i can calculate the circumference and area of circles. can calculate edge lengths, areas and volumes of right prisms and cylinders. can estimate the volume of arbitrary solids by decomposing them or comparing them with known solids. Volume and surface area of prisms
MA.2.A.3.j can calculate lengths, areas and volumes of pyramids, cones and spheres. can determine angles based on angle sums, Thales' theorem, similarity and congruence. Pyramids: Calculating Volume and Surface Area
MA.2.A.3.k can recognise similarities and calculate lengths, areas and volumes in similar figures and solids.
MA.2.B.1 · The students can explore geometric relationships, in particular between lengths, areas and volumes, formulate conjectures and exchange findings.
MA.2.B.1.h can formulate conjectures when exploring geometric relationships, test them and, if necessary, formulate new conjectures. engage in research tasks on shape and space (e.g. drawing rectangles on grid lines and investigating the number of grid points on the diagonals).
MA.2.B.1.i are able to use the computer to explore geometric relationships (e.g. the position of the circumcenter in acute-angled, right-angled and obtuse-angled triangles).
MA.2.B.1.j can vary geometric relationships in polygons - in particular between angles, lengths and areas - and exchange conjectures about them (e.g. shifting the apex of a triangle parallel to the base; angular relationships in a triangular grid). can use dynamic geometry software to explore geometric relationships (e.g. the ratio of the segments of medians; the position of the circumcenter for different triangles).
MA.2.B.1.k can systematically vary angles, line segments and areas on figures and solids and formulate conjectures (e.g. angle over a chord in a circle, ratio between the diameter and the circumference of a circle). can systematically vary edge lengths, surface areas or volumes of solids and formulate relationships (e.g. change of edge lengths, surface areas and volume of a cuboid when all edges are halved / doubled). can solve geometric problems constructively using dynamic geometry software and systematically vary figures and relationships (e.g. compare the squares on the two shorter sides of a triangle with the largest square in the triangle). Calculating the Volume of Cuboids
MA.2.B.1.l can investigate problems of combinatorial geometry (e.g. number of space diagonals in Platonic solids).
MA.2.B.2 · The students can check statements and formulas about geometric relationships, support them with examples, and justify them.
MA.2.B.2.d can check and justify or refute statements as well as perimeter and area formulas for squares and rectangles (e.g. in rectangles and squares the diagonals intersect at right angles).
MA.2.B.2.e can use heuristic strategies: planning, sketching, examining examples, working forwards, working backwards from an assumed solution. can justify statements and area formulas for triangles and quadrilaterals with sketches and models (e.g. a rectangle is divided by its diagonals into four triangles of equal area; the area of a rhombus is half as large as the product of the diagonal lengths). Calculating the Area of Triangles
MA.2.B.2.f can explain formulas and geometric properties using examples (e.g. the area formula for a triangle, the equal length of the four space diagonals in a cuboid; in a right-angled triangle, the two acute angles together amount to 90°). Calculating the Area of Triangles
MA.2.B.2.g can explain volume formulas for prisms and pyramids (e.g. decompose a cube into pyramids by cuts and determine their volume). can substantiate theorems of plane geometry with examples and follow their proofs (e.g. Pythagorean theorem, inscribed angle theorem, Thales' theorem). Pythagorean theorem in a right-angled triangle · Pyramids: Calculating Volume and Surface Area
MA.2.B.2.h can combine geometric and algebraic knowledge and draw conclusions (e.g. in a right-angled, isosceles triangle, not all side lengths can be integers).
MA.2.C.1 · The students can represent bodies and spatial relationships.
MA.2.C.1.h can draw and describe composite bodies (e.g. made of boxes, rolls and prisms).
MA.2.C.1.i can draw the oblique view, the top view, front view and side view of right-angled solids on a grid (e.g. 3 offset cuboids arranged in a staggered way).
MA.2.C.1.j Extension: can sketch and draw line segments and planes in cuboids and cubes (e.g. cutting planes in a cuboid). Extension: can draw or represent solids on the computer.
MA.2.C.1.k can sketch prisms and pyramids and represent them as oblique drawings, in top view, front view and side view, as well as draw their nets.
MA.2.C.1.l can make sketches for scale models or build models (e.g. net of a gable roof at a scale of 1:50). Converting distances using the scale
MA.2.C.2 · Students can fold, sketch, draw and construct figures, as well as exchange and check representations of plane geometry.
MA.2.C.2.g can trace, describe and check folds, sketches and drawings. can transfer angles and measure angles with a geometry set square. can draw, modify and arrange shapes using a computer. can enter commands for drawing shapes in a programming environment, modify them and describe their effects (e.g. forward, turn left, forward). Measuring angles with a protractor
MA.2.C.2.h can draw perpendicular lines, angle bisectors and perpendicular bisectors with a geometry triangle. can construct angle bisectors, perpendicular bisectors and equilateral triangles with compass and straightedge. can draw figures on the computer. Compass and Straightedge: Construct Precisely · Understanding Perpendicular Bisectors and Angle Bisectors
MA.2.C.2.i can sketch figures and geometric relationships and carry out drawings using a geometry set square and compass or dynamic geometry software (e.g. draw or construct a parallelogram with a, b and ha). Compass and Straightedge: Construct Precisely
MA.2.C.2.j can describe geometric representations and constructions using technical mathematical language.
MA.2.C.3 · Students can visualize figures and solids in different positions in their minds, represent and describe changes (mental geometry).
MA.2.C.3.f can rotate and shift figures and solids in their imagination (e.g. views of a solid made of 5 to 8 cubes).
MA.2.C.3.g can change solids in imagination and describe the results (e.g. mentally grind off all corners of a cube and describe the new solid). can carry out operations mentally and represent the results (e.g. rotate a cube structure made of 4 cubes by 90° and sketch it).
MA.2.C.4 · The students can determine the coordinates of figures and solids in a coordinate system or represent figures and solids based on their coordinates, as well as read and draw plans.
MA.2.C.4.g can draw a floor plan of a flat to scale or read corresponding plans. can sketch paths and spatial relationships (e.g. the way to school) or use corresponding plans. Converting distances using the scale
MA.2.C.4.h can represent spatial relationships of objects to scale in a coordinate system (e.g. the school playground). Converting distances using the scale · Reading points in the coordinate system
MA.2.C.4.i can represent figures in the Cartesian coordinate system (including with negative and non-integer coordinates). can calculate distances and areas in a coordinate system. Reading points in the coordinate system · Distance between points with the same coordinate · Area and perimeter in the coordinate system
MA.2.C.4.j can represent geometric mappings in the coordinate system (e.g. reflection of a triangle across the line x = 2). Moving, rotating and stretching in the coordinate system
MA.3.A.1 · The students understand and use terms and symbols for quantities, functions, data and chance.
MA.3.A.1.i can orient themselves by reference quantities: 1 m³, 1 dm³, 1 cm³. can understand and use prefixes: mega, giga, tera. Converting Area and Volume Units · Converting data amounts into megabytes and gigabytes
MA.3.A.1.j understand and use the terms coordinate system, currency, arithmetic mean (extension: inverse proportionality). can use units of measurement and their abbreviations and orient themselves to reference quantities: area measures (km², ha, a, m², dm², cm², mm²), volume measures (km³, m³, dm³, cm³, mm³), money (CHF, €, $). Reading points in the coordinate system · The Mean: How to Find the Average · Converting Area and Volume Units · Calculating with Money: Budget and the Better Deal
MA.3.A.1.k understand and use the terms absolute and relative frequency, x-coordinate, y-coordinate, x-axis, y-axis, unit length, probability. can use units of measurement and their abbreviations: speed (km/h, m/s, kB/s, dpi). Predictions with Probability · Understanding Distance, Time and Speed
MA.3.A.1.l understand and use the terms increase in %, interest, interest rate, capital, discount, gross, net. Increasing and decreasing percentages · Calculating interest: savings balances and deposits
MA.3.A.1.m understand and use the terms (linear) function, certain, possible, impossible events, flowchart, bit, byte. can understand and use prefixes: micro, nano. can use units of measurement and their abbreviations: density (kg/dm³, g/cm³). Calculating function values of linear functions
MA.3.A.1.n understand and use the terms exponential growth, factorial.
MA.3.A.2 · The students can estimate, measure, convert, round and calculate with quantities.
MA.3.A.2.i can estimate areas and volumes [m³] in a suitable unit of measure and convert them into neighbouring units of measure. can compare quantities in absolute and relative terms (e.g. 120 pieces or 60% or ⅗ of a quantity). can measure distances and durations for speed calculations. Converting Area and Volume Units · What Percentage One Number Is of Another · Understanding Distance, Time and Speed
MA.3.A.2.j can use the decimal system of units (SI system) and assign the prefixes mega, kilo, deci, centi and milli to the powers of ten. Numbers in Scientific Notation
MA.3.A.2.k können Berechnungen mit zusammengesetzten Masszahlen durchführen und Grössenangaben von einer Einheit in eine andere umrechnen. können Geschwindigkeiten umwandeln (e.g. von 200m/10s in 72 km/h). Understanding Distance, Time and Speed
MA.3.A.3 · Pupils can describe functional relationships and determine function values.
MA.3.A.3.f can determine and compare shares (e.g. in X with 2 toy shops live 12 000 people; in Y with 8 toy shops live 30 000 people). Comparing numbers: by how much and how many times · Simplifying Ratios: Comparing Parts
MA.3.A.3.g can determine function values from graphs of functions. can work with inversely proportional relationships (e.g. number of cards per person with 72 cards and x players). understand percentages as proportional assignments and carry out percentage calculations (e.g. What percentage are 7 of 35, and what is 7% of 35?). Inverse Proportionality: More People, Less per Person · Calculate percentages: how much is 7% of 35? · What Percentage One Number Is of Another · Calculate the whole (base value) from a known percentage value
MA.3.A.3.h can determine pairs of values for a function equation and plot them in a coordinate system. can determine distances based on scale specifications and vice versa (e.g. mark suitable routes for a 12 km hike on a map). Calculating function values of linear functions · Converting distances using the scale
MA.3.A.3.i can determine the function value for a given number from a table of values, from a graph, and with the function equation, and plot pairs of values in the coordinate system (e.g. y = 2x + 1. For x = 7 → y = 15). can use calculators or suitable software (e.g. spreadsheets) to calculate function values and measures. can solve contextual problems involving percentages (e.g. slope and interest). Calculating function values of linear functions · Increasing and decreasing percentages · Calculating interest: savings balances and deposits
MA.3.A.3.j can determine the point of intersection of two straight lines algebraically and graphically. Solving two equations together
MA.3.A.3.k Be able to draw the graph of linear functions and determine the slope, the y-intercept and the zero. Slope and y-intercept of straight lines · The zero: where the graph crosses the x-axis
MA.3.B.1 · Students can formulate questions about relationships between quantities and functional relationships, investigate these, and check and justify their results.
MA.3.B.1.f can explore quantities of other cultures (e.g. various units of length in the Middle Ages in German-speaking Switzerland). can compare experiments, measurements and calculations (e.g. How precisely can the length of a room be measured using foot lengths?)
MA.3.B.1.g can formulate and justify functional relationships, in particular for price-performance and distance-time (e.g. purchase of drinks offered in different pack sizes). Understanding Distance, Time and Speed
MA.3.B.1.h Extension: can change parameters in equations and formulas and investigate the effects, in particular with electronic tools (e.g. change in monthly mobile phone costs with an expensive subscription and cheap call tariffs).
MA.3.B.1.i can check results and statements about functional relationships, in particular by interpreting tables, graphs and diagrams (e.g. the commute by bicycle and train from X to Y takes less time and is cheaper than the journey by car). Reading change over time from a graph · Reading data from tables and charts
MA.3.B.1.j can explore functional and statistical relationships, pose questions about them and compare results (e.g. the relationship between gradient in degrees and gradient in percent). can explore raw statistical data on social, economic and ecological questions and exchange conjectures about them.
MA.3.B.2 · The students can investigate real-life situations involving statistics, combinatorics and probability, formulate conjectures and test them.
MA.3.B.2.d can systematically write down all possibilities in countable variations and combinations (e.g. numbers with the digits 1, 2, 3 with and without repetition: 123, 132, 213, 231, 312, 321, 112, 121, 211, ...). Counting Possibilities Systematically · Product rule: Counting pairs
MA.3.B.2.e can determine frequencies experimentally and formulate conjectures about their probabilities (e.g. tossing a drawing pin: landing head up or point down; with two dice: getting two even numbers or a sum of 7). are willing to engage with unfamiliar questions about combinatorics and probability. Estimating Probability from Experiments
MA.3.B.2.f can check and justify probabilities and statistical information (e.g. the probability of getting heads twice in a row when tossing a coin is 0.25; in the Voralpen, relatively more young people own a scooter than in the Mittelland)
MA.3.B.2.g compare combinatorial problems, recognize and invent analogies (e.g. handshakes among 5 people is analogous to 2 of 5 people receiving a five-franc coin).
MA.3.C.1 · The students can collect, order, represent, evaluate and interpret data on statistics, combinatorics and probability.
MA.3.C.1.g can represent and interpret data on lengths, capacities, weights, durations, quantities and prices in diagrams using a computer. can compare the probabilities of individual events. Reading and comparing diagrams and tables
MA.3.C.1.h can carry out multistage random experiments with dice, coins or cards and represent possible events (e.g. draw a tree diagram for tossing a coin three times). Product rule: Counting pairs
MA.3.C.1.i Extension: can carry out random experiments and determine probabilities (e.g. determine the probability of drawing the same suit 2 times in a row from a deck of cards). Extension: can derive statements about probability from the relative frequency of an event (e.g. in one month, 88 of 2'750 trains are more than 5 min late, 57 of them more than 10 min). Predictions with Probability
MA.3.C.1.j can establish relationships between different quantities based on data (e.g. the connection between distance run and winning in football). can work on social (e.g. accident prevention), economic (e.g. interest, discount, leasing) and ecological (e.g. water consumption, waste disposal) questions and compare numerical data in absolute and relative terms. Increasing and decreasing percentages · Reading data from tables and charts
MA.3.C.2 · The students can mathematize real-life situations, represent them, calculate, and interpret and check the results.
MA.3.C.2.f recognise proportional and linear (extension: inversely proportional) relationships in real-world situations (e.g. taxi fare with a basic fare and a fixed price per km). can represent pairs of values as well as graphs of functions in the coordinate system (e.g. intermediate times in 10'000 m races; weight or mass and price of food). can translate everyday situations (e.g. area of a room; speed of a car; fuel consumption) into mathematical language, identify the correct quantities and choose suitable units of measurement. Reading change over time from a graph · Calculating function values of linear functions
MA.3.C.2.g can represent the dependence between two quantities with a graph of a function and interpret the course of graphs (e.g. distance-time diagram for a 400 m run). Extension: can choose a suitable scale in the coordinate system for tables of values. Extension: can describe linear functional relationships with a term (e.g. exchange rates). Reading change over time from a graph
MA.3.C.2.h can relate value tables, diagrams, factual texts, terms and graphs to one another and interpret them. can work on real-world situations according to functional, statistical and probabilistic aspects, make appropriate decisions and present solution paths with value tables, diagrams, texts, terms and graphs.
MA.3.C.2.i can use software for the graphical representation of functions.
MA.3.C.3 · The students can make terms, formulas, equations and tables concrete with real-life situations.
MA.3.C.3.g Extension: can make letter expressions, formulas and linear function equations concrete with real-life situations (e.g. the function equation y = 2x + 3 with price = 2 · number + 3). Translating text descriptions into terms · Translating word problems into equations

Outside the curriculum — extra tasks

Tasks that this grade's curriculum does not include, but other countries teach at this level. Free, like everything here, and never mixed into the topics or the ready-made tests of the curriculum.