English
Curriculum (France)

Mathematics — Grade 2

Grade 2 (France) — Addition and subtraction, working with data

Imaginesis: printable math worksheets for this grade (France) — word problems with hints, answer keys and step-by-step solutions as PDF, also as a test in two to four groups (A–D).

with answer keys · step-by-step solutions · hints · tests in groups A–D

Free: sample worksheets and the editor demo without an account.

Topics in this grade

Mathematics in Grade 2 (CE1) according to the Cycle 2 curriculum: numbers up to 1,000, introductory fractions, column addition and subtraction, the × sign, multiplication tables, euros and cents, time and durations. Each concept is accompanied by exercise templates ready for printable worksheets.

Numbers, calculation and problem solving

Adding numbers up to 100

Your child is learning to calculate the sum of two numbers less than 100, relying on tens and ones, and to solve one-step addition problems.

13 task typesCreate a worksheet →

Description and task types

The programme sets the following points from the cycle 2 objectives: adding or subtracting 10 to a number, adding a number less than 9, and adding two numbers less than 100. These points are announced as expected at the end of CP, and CE1 picks them up again. In CE1, the point specific to this year is solving one-step additive problems of the part-whole type, for example "In a box there are 34 red marbles and 25 blue ones, how many marbles in all?".

The most frequent error comes from carrying. When the units exceed 9, for example 38 + 27, the child often writes 515 or 55 without carrying the ten: they add the digits column by column without regrouping. On the number line, another difficulty appears: the child counts the first number as a jump, or starts from 1 instead of starting from the starting number, which shifts the whole result by one unit.

The worksheets in this section offer several forms of exercises on this theme: addition on the number line, jumping on the hundred chart (where adding 10 means moving down one row), addition of two-digit numbers, the number pyramid, the rule table to complete, as well as exercises where you must choose the correct result or spot the error. The part-whole problems serve to connect these calculations to concrete situations.

Curriculum alignment: Solve one-step additive problems of the part-whole type.
Curriculum alignment: Add or subtract 10 to or from a number.
Curriculum alignment: Add a number less than 9 to a number.
Curriculum alignment: Add two numbers less than 100.

Task types: Adding two-digit numbers · Addition on the number line · Addition on the number line within 100 · Addition within 100: choose the result · Addition within 100: is the sum right? · Addition within 100: jump on the hundred grid · Rule table (addition): fill in the results · Addition within 100: correct the mistake · Addition within 100: match each sum to its result · Addition: which sum is different · Number pyramid · The addition code · Three parts at once (within 100)

Spotting and extending a pattern

Your child learns to identify the rule of a sequence of numbers or patterns, then to extend it, find a missing term, or find a term further along in the sequence.

11 task typesCreate a worksheet →

Description and task types

In Grade 2, students learn to observe patterns in sequences of numbers up to 1,000, as well as sequences of symbols or letters. They use ordinal numbers (first, second, next term) to navigate the sequence, determine how much the pattern increases or decreases with each step, and anticipate upcoming values.

A common mistake is looking only at the last two visible numbers instead of checking the pattern across the entire sequence. Children may then confuse the direction of the pattern by adding instead of subtracting in a decreasing sequence, or use the wrong step size when a number is missing in the middle.

Written practice is based on a variety of situations:

  • determining how much a sequence increases by or finding which sequence grows the fastest;
  • filling in the missing number in the middle or identifying the first number;
  • choosing the next term, correcting an improperly continued sequence, or extending a decreasing pattern.

Curriculum alignment: Use ordinal numbers in the context of a sequence of symbols, letters or numbers.
Curriculum alignment: Use ordinal numbers when studying sequences of symbols, shapes, letters or numbers.

Task types: Continue the countdown rhythm · Continue the number rhythm · Visual pattern: how many squares in the next figure? · Next term of the pattern: choose the correct answer · Next term of the pattern: true or false · Number pattern: which number is missing in the middle · Patterns: correct the wrongly continued pattern · What was the first term of the pattern · Number pattern: how much does it grow each time · Patterns: find a term far along the pattern · Patterns: which grows faster and by how much?

Adding up to 100 with carrying

Your child is learning to work out additions up to 100 where the sum of the units is greater than 9, carrying one ten over into the tens column.

9 task typesCreate a worksheet →

Description and task types

The programme asks pupils to add two numbers less than 100, with this rule targeted from CP (first year of primary school). In CE1 (second year), it includes in particular adding 9, 19 or 29 to a number. Pupils work with numbers up to 100, relying on tens and units.

The most common error is forgetting to carry over. For example, for 38 + 27, the child calculates 8 + 7 = 15, writes 5 and forgets the ten; they then get 55 instead of 65. With 9, 19 or 29, another confusion often appears: the child adds 10, 20 or 30, then forgets to subtract 1; for example, 38 + 19 gives 58 instead of 57.

In practice, the worksheets include in particular:

  • Addition up to 100 with carrying: writing down and calculating additions where a ten must be carried over.
  • Complete to the next ten and finish the calculation: first complete up to the next ten, then add the remainder.
  • Addition up to 100 with carrying: choose the result: identifying the correct result among several proposals.
  • Addition up to 100: check and find the error: identifying a forgotten carry in a calculation already done.

Curriculum alignment: Add 9, 19 or 29 to a number.
Curriculum alignment: Add 8, 9, 18, 19, 28, 29, 38 or 39 to a number.
Curriculum alignment: Add a number less than 9 to a number.
Curriculum alignment: Add 9 to a number.
Curriculum alignment: Add two numbers less than 100.

Task types: Addition within 100 with regrouping: choose the sum · Addition within 100: true or false · Making the next ten: how much is missing? · Addition within 100 with regrouping · Addition within 100: how much is missing to the target · Bridge through ten and finish the calculation · Word problem — addition (change) · Addition within 100: correct someone else's result · Addition within 100: which sum is larger? · Addition within 100: unknown starting amount (grade 3) · Number sequence within 100: give the next term (grade 3) · Addition and subtraction within 100: two steps (grade 3) · Addition within 100: balancing both sides (grade 3) · Addition within 100: check the result, find the mistake (grade 3) · Addition within 100: word problem with a spare number (grade 3)

Order of numbers: what does not change

In Grade 2, students learn to change the order of numbers and group them cleverly to calculate sums and small products more easily.

8 task typesCreate a worksheet →

Description and task types

In CE1 (Year 2), the child learns that the order of the terms in an addition can be changed without changing the result: 3 + 8 gives the same thing as 8 + 3. They also understand that multiplication is commutative, meaning that 4 × 6 and 6 × 4 give the same product. For mental calculation, the curriculum also asks the child to know how to calculate the product of a number between 11 and 19 by a number less than 10, by breaking down the larger of the two factors into a sum (for example 12 × 3 = 10 × 3 + 2 × 3). This decomposition for numbers from 11 to 99 is expected later, in CE2.

A common mistake is to believe that the position of numbers matters: the child thinks that "8 + 3" and "3 + 8" must give different results, because they are not calculated in the same way in their head. The child should then be asked to check that the result does not change, rather than being asked to recalculate each case.

In the worksheets in this section, this work mostly takes the form of additions. The child can compare two sums where the terms are swapped ("Swapping terms: compare the two sums", "The same sum, sides swapped"), choose the most convenient order for adding ("Practical order of addition: choose the order"), or identify four terms grouped into two convenient pairs ("Four terms, two convenient pairs"). These exercises prepare for the property of multiplication, but the worksheets offered here do not yet contain a multiplication exercise on this point.

Curriculum alignment: Understand and know that multiplication is commutative.
Curriculum alignment: Calculate the product of a number between 11 and 19 and a number less than 10 by decomposing the larger of the two factors into the sum of two numbers (distributivity property of multiplication over addition).
Curriculum alignment: Calculate the product of a number between 11 and 99 by a number less than 10 by decomposing the larger of the two factors into the sum of two numbers (distributivity property of multiplication over addition).

Task types: Convenient order of adding: choose the order · Swapping addends: compare the two sums · A handy order of adding: true or false · Addition within 100: easy strategy and explanation · Convenient order of adding: choose the result · The same total, sides swapped — what is hidden · Four terms, two convenient pairs · Properties of addition: missing term in an equality

Ordinal numbers: first, second, rank

The child learns to locate an object or a person in a list or a line, using first, second, third and their equivalents up to one hundredth.

7 task typesCreate a worksheet →

Description and task types

In Grade 2 (CE1), children must know ordinal numbers up to "centième" (hundredth) and use them to locate a rank or position in a line or a list of objects or people. The Cycle 2 curriculum also asks pupils to make the link between the rank of an object and the number of elements that come before it, and to use ordinals to describe a sequence of symbols, letters or numbers.

The most common error is confusing rank with number. For example, in a line, the child who is fifth has four people in front of them, not five. It is also common to count from the wrong end, or to confuse "the third place from the beginning" with "the third place from the end".

The worksheets in this section offer several types of exercises:

  • Which place from the beginning: choose the correct answer, or say true or false.
  • Ranks: which place from the beginning?: find the rank of an element in a list.
  • Ranks: how many are there between two places?: count the elements located between two given ranks.
  • Ranks: how many are there, rank known from both ends?: find the total number of elements from the rank of an element, counted from both sides.
  • Place in the line from both ends: choose the result or say true or false, taking into account the place counted from each end.

Curriculum alignment: Know ordinal numbers up to one hundred.
Curriculum alignment: Understand and use ordinal numbers.
Curriculum alignment: Identify a rank or a position in an ordered line or in a list of objects or people.
Curriculum alignment: Relate the position of an object in a list to the number of elements that precede it.
Curriculum alignment: Use ordinal numbers in the context of a sequence of symbols, letters or numbers.
Curriculum alignment: Understand and use ordinal numbers.
Curriculum alignment: Identify a rank or a position in an ordered line or in a list of objects or people.
Curriculum alignment: Relate the position of an object in a list to the number of elements that precede it.
Curriculum alignment: Use ordinal numbers when studying sequences of symbols, shapes, letters or numbers.
Curriculum alignment: Know the ordinal numbers up to "twentieth".

Task types: Ordinal numbers: which position from the start? · Which position from the front: choose the correct answer · Which position from the front: true or false · Ordinal numbers: how many between two places? · Ordinal numbers: how many, given place from both ends? · Place in line from both ends: choose the result · Place in line from both ends: true or false

Adding up to 20 without crossing the tens

In Grade 2, students learn to calculate sums up to 20 without regrouping, relying on addition tables and benchmarks such as doubles or the number 10.

7 task typesCreate a worksheet →

Description and task types

In this skill, the child adds two numbers whose result stays up to 20, without crossing the tens. For example, 7 + 2 = 9 or 12 + 5 = 17: we add the units together without going past 9. The cycle 2 curriculum (from CP to CE2) also aims to understand the symbols "+", "-" and "=", to know addition facts in both directions, to add or subtract 1 or 2, and to know doubles and halves of common numbers. This sheet only covers the part "addition without crossing the tens".

The most common mistake is counting from 1 instead of starting from the first number: for 8 + 3, the child counts "one, two, three…" on their fingers and often gets the answer wrong by one. Another common confusion is reading the "=" as "and here comes the next part" or reversing the terms of an addition. These errors come from the fact that the child does not yet have a stable picture of numbers up to 20.

The printable worksheets include in particular:

  • Additions without crossing the tens: choose the result, where the child circles the correct answer among several options.
  • Additions without crossing the tens: true or false, to check an equality such as 6 + 3 = 9.
  • Additions with two ten-frames, where the child represents each number on a grid of 10 squares to see the total.
  • Addition up to 20: count two ten-frames and Break down ten: how many are missing?, which rely on the same representation.
  • Addition up to 20: correct the error and Addition up to 20: three terms, to spot a mistake and chain two additions together.

Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Understand and use the symbols "+", "-" and "=".
Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Know the doubles and halves of common numbers.
Curriculum alignment: Add or subtract 1 or 2 to or from a number.

Task types: Adding with two ten-frames: choose the result · Adding with two ten-frames: true or false · Addition within 20: count two ten frames · Make ten: choose the result · Make ten: true or false · Making ten: how many are missing? · Addition within 20: correct the mistake · Add within 5 (grade 1) · Add within 5: choose the result (grade 1) · Add within 5: true or false (grade 1) · Adding without crossing ten: choose the result (grade 1) · Adding without crossing ten: true or false (grade 1) · Addition within 20 (grade 1) · Number bond: the whole from three parts (grade 1) · Adding within 20: choose the correct answer (grade 1) · Adding within 20: three numbers (grade 1) · Adding within 20: true or false (grade 1)

Subtracting up to 100 in CE1

The child learns to subtract 9 or a number smaller than 9 from a number up to 100, by relying on tens and ones.

7 task typesCreate a worksheet →

Description and task types

In CE1 (Year 2), the child works on subtraction within numbers up to 100. The curriculum benchmarks for this level are subtracting 9 from a number and subtracting a number less than 9 from a number. For example, the child can calculate 52 − 9 or 47 − 5 and explain how they found the result.

The most common error with 9 is to subtract 10 instead of 9, and then forget to add 1 back. Thus, 52 − 9 becomes 42 instead of 43. Another difficulty appears when the calculation crosses the tens: the child subtracts the units without taking into account the move to the lower ten, and the result is wrong by a few units.

In the worksheets, this concept takes the form of "Subtraction up to 100", "Subtraction up to 100: jumping backwards on the grid" and "Subtraction step by step", which help break down the calculation. The exercises "Subtract up to 10: how many are left?" reinforce small calculations. The activities "Subtraction up to 100: check and find the mistake" and "Subtraction up to 100: correct the wrong result" help children spot the error of the type "10 instead of 9".

Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Subtract 9 from a number.
Curriculum alignment: Subtract a number less than 9 from a number.
Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Subtract 9, 19, 29 or 39 from a number.
Curriculum alignment: Know the addition tables in both directions.
Curriculum alignment: Add or subtract 10 to or from a number.
Curriculum alignment: Subtract a number less than 10 from a whole number of tens.

Task types: Subtraction within 100 · Subtraction within 100: jump back on the hundred grid · Subtraction step by step · Subtraction within 100: choose the correct result · Subtraction within 100: correct someone else's result · Subtraction within 100: some left, some came, what remains? · Two subtractions in a row (within 100) · Subtract within 10: how many are left? (grade 1) · Subtract within 5 (grade 1) · Subtract within 5: choose the result (grade 1) · Subtract within 5: true or false (grade 1) · Take away within 10: choose the result (grade 1) · Take away within 10: true or false (grade 1) · Missing start number: choose the number (grade 3) · Subtraction within 100: how many at the start? (grade 3) · Subtraction with one number too many (within 100) (grade 3) · Subtraction within 100: check and find the mistake (grade 3)

Adding and subtracting tens and hundreds

Your child is learning to add or subtract a whole number of tens or hundreds, for example 352 + 300 or 780 − 40.

7 task typesCreate a worksheet →

Description and task types

In CE1, the child learns to add or subtract a whole number of tens (30, 40, 50...) or hundreds (100, 200, 300...) to or from a number. The cycle 2 curriculum begins with tens (20, 30, 40... 90) from CP onward; CE1 picks up this idea and extends it to hundreds.

The most frequent error is changing the wrong digit. For example, to calculate 452 + 30, the child writes 455 or 472 instead of 482: they treat the tens digit as if it were the units, or they count one by one instead of seeing that they need to move one step in the tens column. With hundreds, the confusion is the same: 452 + 300 sometimes becomes 352 or 455.

On the worksheets, the concept appears in several forms: completing missing hundreds, choosing the correct result after a jump of hundreds, making two successive jumps, removing whole hundreds, combining several hundreds added together, or spotting and correcting an error in a calculation already done. To help at home, you can ask your child to say which digit changes before giving the result.

Curriculum alignment: Add or subtract a whole number of tens to a number. Add or subtract a whole number of hundreds to a number.
Curriculum alignment: Add or subtract 20, 30, 40, 50, 60, 70, 80 or 90 to or from a number.

Task types: Jumping by full hundreds · Jumping by full hundreds: choose the correct result · Taking away full hundreds · Adding hundreds: how many hundreds were added? · Full hundreds: fix the mistake · Jumping by full hundreds: two jumps in a row · Missing hundreds: choose the number · Whole hundreds: how much is missing to balance (grade 3)

Reading and writing numbers up to 1000

The child learns to go from a number written in digits to its written form in words, and vice versa, for numbers up to 1000.

6 task typesCreate a worksheet →

Description and task types

In CE1, the child must know the written and spoken sequence of numbers up to one thousand. They must also be able to use different written forms of the same number and move from one to another: in digits (352) and in words (three hundred and fifty-two).

The most common error concerns the zero in the middle. A child who hears "three hundred and five" may write 35 or 305 without finding the right answer, because speech does not always show the place of empty tens. They may also reverse the order of the words and write the digits in the order in which they hear them.

School worksheets repeat these tasks in several forms: write the number in digits, read the number in full words, choose the written form in digits among several suggestions, true or false? about a written form in words, correct the error in an incorrectly written number, and the zero in the middle, where the child spots and corrects the missing zero.

Curriculum alignment: Know the written and spoken sequence of numbers up to one thousand.
Curriculum alignment: Know and use various representations of a number and move from one to another.
Curriculum alignment: To know the written and oral sequence of numbers up to one hundred.
Curriculum alignment: Know and use various representations of a number and move from one to another.

Task types: Write the number in digits · Numbers in words: choose the digits · Numbers in words: true or false · Read the number in words · Numbers in words: correct the mistake · Zero in the middle: fix how the number is written

Counting by n, forwards and backwards

The child learns to continue a sequence of numbers with a regular step, counting both forward and backward, up to one thousand.

6 task typesCreate a worksheet →

Description and task types

In CE1 (Grade 2), the curriculum requires knowing the written and spoken sequence of numbers up to one thousand. Counting in steps of n means keeping a constant step, for example by 10s or by 5s, and using it to move forward or backward along this sequence.

The most common mistake appears when the sequence crosses a hundred or a thousand. For example, after 395, the child writes 305 instead of 405: they change the tens digit without seeing the carry over to the hundreds. They may also go back to a step of 1 instead of keeping the requested step.

The worksheets include in particular:

  • continuing a sequence with the same step, for example "340, 350, 360, …";
  • counting in steps of n by choosing the next number, or correcting the wrong number in a sequence;
  • counting by 10s: finding the next number, choosing the correct result, or saying whether a statement is true or false;
  • counting backward by equal steps, to move back along the sequence;
  • how many times you must count forward to get from one number to another.

Curriculum alignment: Know the written and spoken sequence of numbers up to one thousand.
Curriculum alignment: To know the written and oral sequence of numbers up to one hundred.

Task types: Counting in steps: choose the next number · Keep counting by the same step · Count backwards in equal steps · Counting in steps: correct the wrong number · Counting on: how many times to reach the number? · How many times added: choose the number · Count by tens: choose the result (grade 1) · Count by tens: true or false (grade 1) · Count by tens: what comes next? (grade 1)

Multiplying numbers up to 20 by 10

The child learns to multiply a number by 10 by understanding that each digit moves to the next place value, for example 4 × 10 = 40.

6 task typesCreate a worksheet →

Description and task types

In Grade 2, children learn to multiply numbers less than 20 by 10, an essential first step before extending this skill to numbers less than 100. They discover how the decimal system works: multiplying by 10 transforms ones into tens. Thus, 4 times 10 gives 4 tens (40), and 10 times 10 causes the number to shift place value to form one hundred (100).

The most common mistake is confusing multiplication with addition: faced with 14 × 10, the child adds 10 and suggests 24 instead of 140. Another difficulty arises when the student applies the rule like a simple magic trick consisting of "adding a zero", without understanding the place-value shift of the digits in the number system.

In practice, practice activities take the form of calculations to solve or guided choices where the correct result must be selected. Worksheets also feature true or false exercises, short word problems with irrelevant information to eliminate, or prompts asking to determine how many whole tens fit into a given quantity.

Curriculum alignment: Multiply a number less than 100 by 10.
Curriculum alignment: Multiply a whole number by 10 or 100.

Task types: Multiplying by 10 · Multiplying by 10: choose the correct result · Multiplying by 10: true or false · Multiplying by 10: a chain of changes · Multiplying by 10: one number too many · Tens: how many whole tens fit? · Ten times ten, or two places further (grade 3–4)

Solving simple one-step problems

Your child learns to read a short problem, to choose between addition and subtraction (or multiplication), and to give the answer to the question asked.

6 task typesCreate a worksheet →

Description and task types

In second grade, your child learns to solve concrete math situations that can be solved in a single step. They practice with "part-whole" additive problems, which use addition or subtraction to find a total or a remainder, as well as simple multiplicative problems.

The typical difficulty consists of grabbing numbers on the fly and adding them without analyzing the context. Many children also struggle when the story requires finding an initial quantity or when extraneous data is included in the text, leading them to combine all available numbers instead of focusing on the question.

In written work, exercises are presented as short everyday stories to guide students to:

  • determine which operation solves the problem (finding a whole or a part);
  • calculate how many are left or find how many there were at the start;
  • spot an unnecessary number in the problem statement and choose the correct result.

Curriculum alignment: Solve one-step additive problems of the part-whole type.
Curriculum alignment: Solve one-step multiplicative problems.
Curriculum alignment: Solve one-step additive problems of part-whole and comparison types.
Curriculum alignment: Solve one-step multiplicative problems.
Curriculum alignment: Understand the meaning of addition and subtraction.
Curriculum alignment: Solve one-step additive problems of the part-whole type.
Curriculum alignment: Solve one-step multiplicative problems (number range up to 30 inclusive).

Task types: Simple word problem — how many are left · A word problem with an extra number — how many are left · Choose the operation: addition (altogether) · Choose the operation: subtraction (take away) · Word problem: choose the correct answer · Word problem: how many were there at the start

Halves and quarters: sharing into equal parts

Your child is learning to name, represent, and calculate half and a quarter of a shape or a collection of objects.

5 task typesCreate a worksheet →

Description and task types

The Year 2 (CE1) curriculum covers the fractions 1/2, 1/3, 1/4, 1/5, 1/6, 1/8 and 1/10, as well as fractions less than or equal to 1. The CE1 worksheets offered here mainly work on halves and quarters: the child learns to say and write "one half" (1/2) or "one quarter" (1/4), to show these parts on a drawing, and then to recognise a part within a whole.

The most frequent error comes from a comparison based on the numbers: the child thinks that 1/4 is bigger than 1/2 because 4 is bigger than 2. They may also consider parts that are not equal to be a half. Another common confusion is mixing up the number of shaded parts with the number of unshaded parts.

In the worksheets, a typical task asks the child to:

  • find how much one part is, or how many parts there are in total;
  • choose how many parts are needed to obtain a given fraction;
  • identify the shaded part of a whole and write the corresponding fraction;
  • correct a part that has been wrongly divided or a wrong answer;
  • check a "true or false" statement about the number of unshaded parts.

Curriculum alignment: Know how to interpret, represent, write and read the fractions 1/2, 1/3, 1/4, 1/5, 1/6, 1/8 and 1/10.
Curriculum alignment: Know how to interpret, represent, write and read fractions less than or equal to 1.

Task types: Part of a whole (halves and quarters) · A fraction of a set: fix the mistake · Fraction of a set: choose how many · Fraction of a set: how many is one part · How many parts left unshaded: true or false · Fraction of a set: how many altogether? (grade 3) · Invent sets that split into equal parts (grade 3)

Solving problems with “how many more”

The child learns to find how much one quantity exceeds another, or how much less it is, in a single calculation.

5 task typesCreate a worksheet →

Description and task types

In Grade 1 (CE1), children learn to solve comparison problems that can be solved in a single step: they are given two quantities and asked how much more one is than the other. The curriculum targets this type of one-step problem. The exercises on this worksheet involve numbers up to 100 for comparing two quantities.

A common mistake is to add the two numbers instead of comparing them. Faced with "how many more?", the child sees two numbers and combines them by reflex. Help them picture the two quantities side by side, for example by drawing two bars or lining up two rows of counters, so they can see the gap between them.

In practice, the worksheets in this subject offer several kinds of tasks:

  • How many more?: choose the correct answer from several options;
  • True or false: decide whether a statement about the gap between two numbers is correct;
  • Find the larger quantity and Find the smaller quantity: identify the largest or smallest number before calculating the difference;
  • Difference up to 100: how many more?: calculate the gap between two numbers up to 100.

Multi-step comparison skills, listed for Grade 2 (CE2) in the curriculum (part-whole and comparison problems), go beyond the Grade 1 level and are not expected at this stage.

Curriculum alignment: Solve one-step additive comparison problems.
Curriculum alignment: Solve one-step additive problems of part-whole and comparison types.

Task types: Difference of numbers within 100: how many more · Difference of numbers: find the larger quantity · Difference of numbers: how many more? Choose the answer · Difference of numbers: how many more? True or false · Difference of numbers: find the smaller quantity

Dividing using the multiplication table

The child learns to find how many times a number is contained in another, by reading the multiplication tables in both directions.

4 task typesCreate a worksheet →

Description and task types

In CE1, the child learns the multiplication tables in both directions. For division, this means they can find a number of groups or a group size from a known product. For example, knowing that 6 × 7 = 42, they know that 42 shared into 6 equal parts gives 7. The exercises at this level involve numbers up to 100. The curriculum also expects children to be able to find half of an even number.

The most common mistake is reading the table in only one direction: the child can recite 6 × 7 but does not see that 42 ÷ 6 is on the same line. They may also confuse the number of parts with the number of objects per part, and so reverse the result. The "÷" symbol itself is introduced by the curriculum in CE2; in CE1, the child mainly works on the sense of sharing and grouping.

On CE1 worksheets, this skill appears through exercises such as "Division in the table (up to 100)", "Division tables: choose the result" or "Missing divisor: choose the number". There are also sharing situations, such as "Sharing into equal parts" or "Division: how many packets do we get". In these, the child links each concrete situation to the table that gives the answer.

Curriculum alignment: Know the multiplication tables in both directions.
Curriculum alignment: Determine half of an even number.
Curriculum alignment: Understand the meaning of division and use the symbol "÷".
Curriculum alignment: Know the multiplication tables in both directions.
Curriculum alignment: Determine half of an even number.

Task types: Division: how many groups will there be · Share into equal parts · Share them out evenly · Division: how many in one row · Division facts: choose the result (grade 3) · Division within the table (to 100) (grade 3) · Division with one number too many (grade 3) · Division: check and find the mistake (grade 3) · Missing divisor: choose the number (grade 3) · What was it divided by (division table) (grade 3) · Division: which sharing gives more per person? (grade 3)

Placing numbers on a number line

The child learns to place a number on a number line and to identify the jumps of tens between two marks.

3 task typesCreate a worksheet →

Description and task types

In Grade 1 (CE1), the child learns to place a number on a graduated number line, that is, to find where it sits between two marks already labelled. In this subject, the work covers numbers up to one thousand, with jumps of tens on the number line.

A common mistake is to count the tick marks one by one without looking at the numbers written on them. When each mark stands for a ten, the child treats a jump of tens as a jump of 1, and the number placed ends up in the wrong position.

The worksheets in this subject include, in particular:

  • Jumping by tens on the number line: placing or reading numbers by moving forward ten by ten.
  • Jumping by tens: choose the number: choosing, from several options, the number that matches the point shown.
  • Jumping by tens: true or false: saying whether a statement about the position of a number is right or wrong.

Curriculum alignment: Knowing how to place numbers on a graduated half-line.
Curriculum alignment: Knowing how to place numbers on a graduated half-line.
Curriculum alignment: Know how to place numbers and locate points on a graduated half-line
Curriculum alignment: Placing numbers and locating points on a graduated half-line
Curriculum alignment: Knowing how to place numbers on a graduated half-line, counting one by one.

Task types: Jump by tens on the number line · Jump by tens: choose the number · Jump by tens: true or false

Learning simple fractions in CE1

Learning to read and write simple fractions such as 1/2, 1/3 or 1/4, and to recognise the numerator and the denominator.

3 task typesCreate a worksheet →

Description and task types

In CE1 (Year 2), the child learns to interpret, represent, write and read the fractions 1/2, 1/3, 1/4, 1/5, 1/6, 1/8 and 1/10, as well as fractions less than or equal to 1. They also discover the words numerator (the number on top) and denominator (the number on the bottom) and learn to use them.

The most common mistake comes from the habit of thinking with whole numbers: the child believes that the bigger the denominator, the bigger the fraction. So they may say that 1/8 is greater than 1/2. In reality, the more pieces something is shared into, the smaller each piece is.

The worksheets include, in particular, the following tasks:

  • One part of a collection: the child chooses the number that matches the part indicated.
  • Fraction of a collection (a/b of the whole): the child identifies the part written as a/b in relation to the whole set.
  • Fraction of a collection (choose how many objects): the child determines how many objects represent the given fraction.

Curriculum alignment: Know how to interpret, represent, write and read the fractions 1/2, 1/3, 1/4, 1/5, 1/6, 1/8 and 1/10.
Curriculum alignment: Know how to interpret, represent, write and read fractions less than or equal to 1.
Curriculum alignment: To know and use the words “denominator” and “numerator”.
Curriculum alignment: Know how to interpret, represent, write and read fractions
Curriculum alignment: Interpret, represent, write and read fractions

Task types: Fraction of a set: choose how many items · Fraction of a set: a/b of the whole · One part of a set: choose the number

Multiplication tables up to 100: what children learn in CE1

In CE1 (second grade), your child learns to use the "×" sign to express a multiplication, to understand it as a number of equal groups or as repeated addition, and to know the products of two numbers in both directions (for example 3 × 4 and 4 × 3).

3 task typesCreate a worksheet →

Description and task types

In CE1, the child learns to understand multiplication as equal groups or repeated addition, to read and write the sign "×", and to know the times tables in both directions: 3 × 4 and 4 × 3 give the same result. The worksheets offered work with products up to 100. The curriculum points on these same times tables continue in CE2 and CM1, beyond this class.

The most common mistake is adding instead of multiplying: the child writes 3 × 4 = 7 because they did 3 + 4. Another confusion comes from the meaning of multiplication: the child does not see that 4 × 3 (4 groups of 3) and 3 × 4 (3 groups of 4) are the same quantity, and believes they must learn two different tables. The sign "×" is new, and it is easy to read it as a "+".

Tasks on this topic are presented as worksheets, for example:

  • Multiplication table (up to 100) to fill in the products.
  • Missing factor and Missing factor: choose the number to find the missing number in a multiplication.
  • Multiplication: equal groups in all and Multiplication as addition: how many times taken to link the product to groups and repeated additions.
  • Multiplication: how many dots in the array to count the products from an arrangement in rows and columns.
  • Multiplication tables: choose the result and Multiplication: check and find the error to spot correct results and mistakes.

Curriculum alignment: Understand and use the symbol "×".
Curriculum alignment: Know the multiplication tables in both directions.
Curriculum alignment: Know common multiplication facts.
Curriculum alignment: Calculate the product of a number between 11 and 19 and a number less than 10 by decomposing the larger of the two factors into the sum of two numbers (distributivity property of multiplication over addition).
Curriculum alignment: Solve one-step multiplicative problems.
Curriculum alignment: Know the multiplication tables in both directions.
Curriculum alignment: Know common multiplication facts.
Curriculum alignment: Know common number facts relating to whole numbers
Curriculum alignment: Know common number facts with whole numbers
Curriculum alignment: Understand the meaning of multiplication.

Task types: Multiplication as addition: how many times it was taken · Multiplication: equal groups altogether · Multiplication: how many dots in the array · Missing factor: choose the number (grade 3) · Times tables: choose the result (grade 3) · Multiplication table (to 100) (grade 3) · Missing factor (multiplication table) (grade 3) · Multiplication with one number too many (grade 3) · Multiplication: check and find the mistake (grade 3) · Multiplication: which is larger and by how much? (grade 3)

Even numbers: two equal parts

Your child learns to identify an even number by checking if it can be divided into two equal parts or written as the sum of two identical numbers.

3 task typesCreate a worksheet →

Description and task types

In Grade 1 (CE1), the pupil learns the concept of parity: a number is even when it can be split into two equal parts. The curriculum for this stage requires knowing this concept. It does not specify a range of numbers specific to CE1; the numbers at this level go up to one thousand.

The printed tasks show the concept in the form of a sum of two identical terms, for example 4 = 2 + 2 or 10 = 5 + 5. A common mistake, as an everyday observation rather than a curriculum requirement, is to rely on visual impression or the size of the number instead of checking whether there are two equal terms. The child may then hesitate over a number they have not memorised.

In the worksheets, there are three formats: Even number: two equal terms, choose, where the child selects the correct decomposition; Even number: two equal terms, true or false, where they judge a statement; and Even number: two equal terms, where they complete the equality. These exercises make it possible to check that the child correctly links parity to the notion of two equal parts.

Curriculum alignment: Know the concept of the parity of a number.

Task types: An even number as two equal addends · An even number as two equal addends: choose · An even number as two equal addends: true or false

Value of digits according to their position (up to 1,000)

The child learns to say what each digit of a three-digit number is worth according to its place: hundreds, tens, or units.

2 task typesCreate a worksheet →

Description and task types

In CE1 (second grade in France), the child works with numbers up to one thousand. They must understand that a digit does not always have the same value: in 253, the 5 represents 5 tens and the 2 represents 2 hundreds. They also learn the relationships between units, tens and hundreds, and move from one way of writing to another, for example from a number written in digits to the same quantity shown with blocks.

The most common mistake is to read the digits one by one, as if they were isolated. A child who writes "two hundred and five" as "25" or as "205" without thinking often forgets that the tens place is missing. They then need to go back to the blocks and count how many hundreds, tens and units there really are.

On the worksheets, this concept takes several forms: composing a number from hundreds, tens and units; counting the whole tens in a number; breaking a number down into hundreds and a remainder; saying how many units there are in total; reading a number from blocks; answering true or false statements about the value of a digit. These exercises can be found in the series "Place Value".

Curriculum alignment: Counting collections by organising them.
Curriculum alignment: Build collections of a given cardinal number.
Curriculum alignment: Know and use the relationship between units and tens, between tens and hundreds, between units and hundreds.
Curriculum alignment: Know and use various representations of a number and move from one to another.
Curriculum alignment: Know the value of digits according to their position in a number.

Task types: Read the number from the blocks · Split the number into hundreds and the rest · Place value: how many ones altogether? (grade 3) · Place value: build a number from hundreds, tens, ones (grade 3) · Place value: how many whole tens (grade 3) · Place value: how many whole tens in a three-digit number? (grade 3) · Place value: true or false (grade 3)

Comparing and ordering numbers up to 1000

The child learns to compare, order and bracket numbers up to 1000 using the signs =, < and >.

1 task typesCreate a worksheet →

Description and task types

In CE1 (Grade 2), the child learns to compare two whole numbers, to arrange them from smallest to largest (or the reverse), and to use the expressions "égal à" (equal to), "supérieur à" (greater than), "inférieur à" (less than) and "compris entre … et …" (between … and …). The numbers involved go up to 1000, which matches the cycle 2 benchmarks: the child should be able to say which number is larger without having to count one by one.

The most common mistake is to compare numbers digit by digit, starting from the right: for example, the child decides that 298 is greater than 305 because 8 is greater than 5. Instead, one should first look at the number of hundreds, then the tens, then the units. Many children also have difficulty reading the signs "<" or ">" in the right direction: the sign always points toward the smaller number.

In the worksheets, this skill appears in several forms: Comparer jusqu'à 1000 : quel nombre est le plus grand ? (Compare up to 1000: which number is the largest?), Comparer jusqu'à 1000 : de combien est-il plus grand ? (Compare up to 1000: how much larger is it?), Place le signe : nombres jusqu'à 1000 (Place the sign: numbers up to 1000) (where =, < or > is written between two numbers) and Ranger jusqu'à 1000 : du plus petit (Arrange up to 1000: from the smallest). Other worksheets ask whether a statement is true or false, or ask the child to choose the correct answer from several options.

Curriculum alignment: Compare, bound and insert whole numbers using the symbols (=, <, >).
Curriculum alignment: Order numbers in ascending or descending order.
Curriculum alignment: Understand and be able to use the expressions "equal to", "greater than", "less than", "between … and …".

Task types: Insert the relation sign: numbers to 1000 · Comparing numbers within 1000: how much greater? (grade 3) · Comparing numbers within 1000: which is greatest? (grade 3) · How many more within 1000: choose the correct answer (grade 3) · How many more within 1000: true or false (grade 3) · Ordering numbers within 1000: from least (grade 3)

Quantities and measures

Measuring and converting in m, cm, and mm

The child learns to measure and write lengths in metres and centimetres, knowing that one metre equals one hundred centimetres.

6 task typesCreate a worksheet →

Description and task types

In CE1, the child must know and use the units metre, centimetre and kilometre, with their symbols m, cm and km. They must also know that one metre equals one hundred centimetres, and choose the unit best suited to express a length. The exercises in this subject deal with numbers up to one thousand, as in the rest of the programme for the class.

The most frequent mistake is to treat the metre and the centimetre as two independent parts, for example by writing "3 m 5 cm" as "35 cm". It often comes from the difficulty of seeing that a metre contains one hundred centimetres, not ten. To correct it, it helps to think of a one-metre ruler cut into one hundred small pieces.

A typical worksheet on this topic offers three types of exercises. The tasks "Metres and centimetres: correct the error" ask the child to spot and fix a wrong conversion. The tasks "Convert metres and centimetres into centimetres" have them express a given length in metres and centimetres as centimetres only. Finally, "Read the length on the ruler" trains them to read a measurement directly from an instrument.

The worksheets in this subject also offer conversions with millimetres, for example "Centimetres into millimetres: choose the correct answer" or "Centimetres into millimetres: true or false". The programme assigns the millimetre to the CE2 class, so these exercises can be seen as preparation or extension rather than a requirement of CE1.

Curriculum alignment: Know and use the units metre, centimetre, kilometre and their associated symbols (m, cm and km).
Curriculum alignment: Choose the most suitable unit for expressing a length.
Curriculum alignment: Know and use the units metre, decimetre, centimetre, millimetre, kilometre and their associated symbols (m, dm, cm, mm, km).
Curriculum alignment: Choose the most appropriate unit for expressing a length.
Curriculum alignment: To know and use the units metre and centimetre and the associated symbols (m and cm)
Curriculum alignment: Knowing that one metre is equal to one hundred centimetres.

Task types: Converting centimetres and millimetres to millimetres · Converting metres and centimetres to centimetres · Read the length from the ruler · Centimetres to millimetres: choose the correct answer · Centimetres to millimetres: true or false · Metres and centimetres: fix the mistake

Weighing with grams and kilograms

Your child learns to use the units g and kg, to know that one kilogram is worth 1,000 grams, and to compare masses.

6 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child learns to read a mass expressed in grams (g) or kilograms (kg), to use these symbols, and to compare two masses. They must also know that 1 kg = 1,000 g. This concerns masses up to one kilogram, that is, up to 1,000 g.

The most common mistake is to confuse the units or to transfer a rule from another area. Many children think that a kilo is worth 100 g, or hesitate between a "big" and a "small" number of grams without remembering the exact relationship. This confusion often comes from the fact that the child cannot picture how big a kilo is: they need to handle real objects to form an idea of it.

Year 2 worksheets mainly offer tasks such as:

  • reading what a scale shows, in grams;
  • converting kilograms into grams, or saying whether a statement is true or false;
  • calculating how many grams are missing to reach one kilo;
  • determining how many servings a package provides.

Curriculum alignment: Know that 1 kg is equal to 1 000 g.
Curriculum alignment: Compare masses.
Curriculum alignment: Know and use the units gram and kilogram and the associated symbols (g, kg).
Curriculum alignment: Know and use the units gram, kilogram and tonne and their associated symbols (g, kg, t).
Curriculum alignment: Choose the most appropriate unit for expressing a mass.
Curriculum alignment: Know the relationships between common units of mass.
Curriculum alignment: Compare masses.
Curriculum alignment: Use the vocabulary associated with masses.

Task types: Converting kilograms to smaller units of mass · Mass: how many grams are missing to a kilogram? · Mass: how much is missing to a full kilogram? · Scale: how many grams does it show? · Kilograms to smaller units: true or false · Mass units from kilograms: choose the answer · How many portions the whole amount makes (grade 3–4)

Drawing line segments and polylines with a ruler

In CE1, the child learns to measure line segments with a graduated ruler and to draw a broken line of a given length.

5 task typesCreate a worksheet →

Description and task types

In CE1, the child first learns to measure the length of a line segment with a graduated ruler. The cycle 2 curriculum requires this skill from CP onward and revisits it in CE1. Drawing a segment of a given length is part of the CE2 curriculum, so it is not required at this stage. For this year, the exercises focus mainly on reading the ruler and on broken lines whose length is known.

The most common mistake is not starting the measurement at the zero of the ruler. The child lines up the end of the ruler with the start of the line, but reads the graduations starting from the number 1 or from another mark, which gives a wrong length off by one or more centimetres. Checking that zero is exactly at the start of the segment avoids this trap.

In CE1 worksheets, several types of exercises appear:

  • Draw a broken line of the given length: the child draws segments with the ruler whose total matches the required length.
  • Draw a rectangle with the given sides: the child uses the ruler to transfer the lengths of the sides.
  • What is the length of the broken line? Choose: the child measures each segment, then chooses the correct answer from several options.
  • Length of a broken line: true or false? and correct the result: the child checks a length calculation already done and finds the error.

These exercises combine measurement and addition: you add together the lengths of the segments that make up the broken line.

Curriculum alignment: Know how to measure the length of a line segment using a graduated ruler.
Curriculum alignment: Draw a line segment of a given length.
Curriculum alignment: Know how to measure the length of a line segment using a graduated ruler.

Task types: Draw a broken line of the given length · Draw a rectangle with the given sides · How long is the broken line? Choose · Length of a broken line: correct the answer · Length of a broken line: true or false

Comparing lengths and masses

In CE1, the child learns to say which object is longer or lighter, and to find out by how much.

5 task typesCreate a worksheet →

Description and task types

In 2nd grade, students develop their ability to compare concrete quantities, mainly lengths and masses. They know how to identify the longest or heaviest object, arrange several items in order of size, and accurately calculate the difference in length between two lines or two objects.

A common difficulty arises when comparing two ribbons: children often look at the protruding end without checking that the starting points are aligned on the same zero line. Likewise, when asked "by how much" an object is longer, they tend to give the total length of the larger one instead of subtracting the measurement of the smaller one to find the difference.

In written exercises, students are asked to order everyday objects, for example in Order from lightest or Which is the longest. Other activities, such as How much longer is the ribbon (in true/false or multiple-choice formats), prompt students to observe two graduated strips to calculate and verify the exact difference.

Curriculum alignment: Compare masses.
Curriculum alignment: Compare lengths.
Curriculum alignment: Use the specific vocabulary associated with lengths.
Curriculum alignment: Compare objects according to their length.
Curriculum alignment: Compare segments according to their length.
Curriculum alignment: Use the vocabulary associated with masses.
Curriculum alignment: Compare objects by their mass.

Task types: Comparing lengths: how much longer is one than the other? · Comparing lengths: which one is the longest? · Mass: order from lightest · How much longer: choose the correct answer · How much longer: true or false

Calculating with money in CE1

In CE1, the child learns to count, compare and combine amounts in euros and cents, then to give change during mock purchases.

5 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child learns to determine the value of a set of coins and banknotes, to compare two sets, and to make up a given sum. They discover the link between euros and euro cents, and the meaning of the decimal comma in an amount, such as 2,50 € for 2 euros and 50 cents. The cycle 2 curriculum also covers numbers up to one thousand, but the text does not set a maximum amount for money here: the worksheets offered give the amounts worked on.

The most common error is to read an amount written with a comma as two separate numbers. Thus, 3,40 € may be read as "3 euros and 40" without understanding that 40 cents is a part of a euro, or that 40 cents must be written as 0,40 €. Another confusion consists of counting the number of coins rather than their value: a child may think that three coins are worth more than two coins, even when the actual value is different.

In practice, the child works on worksheets where they must:

  • find the value of a drawing of coins and banknotes ("Money in the drawing: how much is there?");
  • choose the coins that allow them to pay ("Coins: which coins can you pay with?");
  • choose the correct amount or correct a mistake ("Change: choose the correct amount", "Change: correct the mistake");
  • calculate the price of several items, check whether there is enough money, or complete what is missing ("Shopping: how much do several items cost?", "Shopping: is there enough money?", "Money: how much is still missing for the purchase?");
  • simulate a purchase and give back the change ("Shopping and change given back").

Curriculum alignment: Know the relationship between euros and cents.
Curriculum alignment: Compare the euro values of two sets made up of coins and banknotes.
Curriculum alignment: Determine the value in euros and cents of a set made up of coins and banknotes.
Curriculum alignment: Make up a given sum of money using euros and cents of a euro.
Curriculum alignment: Simulate purchases by handling play coins and banknotes. Give change.
Curriculum alignment: Know the meaning of decimal notation for a sum of money.
Curriculum alignment: Simulate purchases by handling play coins and banknotes. Give change.
Curriculum alignment: Use the vocabulary specific to money.
Curriculum alignment: Compare the values of two sets consisting of coins or of two sets consisting of coins and banknotes.
Curriculum alignment: Determine the value in euros of a set consisting of coins and banknotes.
Curriculum alignment: Make up a given sum of money using coins and banknotes.
Curriculum alignment: Simulate purchases by handling play coins and banknotes. Give change.

Task types: Money in a picture: how much is there? · Money: how much is still missing to buy it · Shopping: how much do several items cost? · Shopping: is there enough money? · Coins: which coins to pay with? · Change: choose the right amount (grade 3) · Change: fix the mistake (grade 3) · Shopping and change (grade 3)

Reading the time on an analog clock

In CE1 (second year of primary school), children learn to read the time on an analog clock and to set the hands to a given time, when it is a whole hour, a half hour, or a quarter hour.

3 task typesCreate a worksheet →

Description and task types

At CE1 (Grade 2), the child must be able to read the time on an analogue clock when it is given in whole hours, in half hours or in quarter hours. They must also be able to set the hands to show a given time in these same cases. At the same time, they learn to tell morning hours from afternoon hours.

The most frequent error comes from confusing the two hands. The child reads the long hand (the minute hand) as if it were the hour, or says "3 o'clock" for "quarter past 3" without looking at where the long hand is. The child therefore needs to first identify the short hand, then the position of the long hand, to know whether the time is on the hour, half past, or quarter past.

In the Mathematics worksheets section, this concept is practised with several types of exercises: Read the time, Read the clock: what time does the dial show, Clock: correct the reading error and Read the clock: true or false. The exercises Clock: how many minutes until the next whole hour? and Clock: which clock shows the earlier time? help compare and count durations on the dial.

Curriculum alignment: Read the time on an analogue clock (when the time is given in whole hours, in hours and half hours, or in hours and quarter hours).
Curriculum alignment: Set the hands of a clock to show a given time in whole hours, in hours and half hours, or in hours and quarter hours.
Curriculum alignment: Know, use and distinguish the hours of the morning and those of the afternoon.
Curriculum alignment: Read the time on an analogue clock.
Curriculum alignment: Setting the hands of a clock to show a given time in whole hours or in hours and minutes.
Curriculum alignment: Read the time on an analogue clock
Curriculum alignment: Setting the hands of a clock to show a given time in hours and minutes
Curriculum alignment: Read the time on an analogue clock
Curriculum alignment: Setting the hands of a clock to show a given time in hours, minutes and seconds
Curriculum alignment: Read a given time in whole hours on an analogue clock with hands.
Curriculum alignment: Set the hands of a clock to show a given time (only whole hours less than or equal to twelve).
Curriculum alignment: Associate a time with a moment of the day.

Task types: Reading a clock: true or false · Reading a clock: which time is on the dial · Clock: correct the mistake in reading · Reading the clock (grade 3) · Clock: how many minutes to the full hour? (grade 3) · Clock: which shows the earlier time? (grade 3)

Calculating a duration on a clock

Your child learns to measure the elapsed time between two moments of the day and to convert hours into minutes.

3 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child learns the units of duration, the hour (h) and the minute (min). They must compare and measure the time elapsed between two moments shown on a clock, within the same day, when the hours are given in whole hours, in hours and half-hours, or in hours and quarter-hours.

The most common mistake comes from confusing the hour and the minute: the child treats the hour as a group of ten minutes, or counts an hour as 100 minutes, as in a decimal calculation. They may also count the clock's marks without taking into account the position of the hour hand, which gives a wrong result for a duration that does not start on an exact hour.

In the CE1 worksheets, this work takes the following form:

  • Duration (how long?): calculate the duration between two displayed times.
  • When did it start?: find the start time from the end time and the duration.
  • The day's plan: order the times: put moments of the day in order.
  • Hours into minutes: choose the right answer, true or false and Convert hours into minutes: link hours and minutes.
  • Time: how many minutes have passed? and Duration: how much longer did one last?: compare or measure a difference in minutes.

Curriculum alignment: Know the units of measurement of duration, hour and minute, and the associated symbols (h and min).
Curriculum alignment: Compare and measure elapsed durations between two instants displayed on a clock (for time intervals within the same day, with times given in whole hours, in hours and half-hours, or in hours and quarter-hours).
Curriculum alignment: Compare and measure elapsed times between two instants shown on a clock (for time intervals within the same day).
Curriculum alignment: Solve one- or two-step problems involving durations.

Task types: Convert hours into minutes · Hours to minutes: choose the correct answer · Hours to minutes: true or false · The day plan: put the times in order (grade 3) · Time duration (how long?) (grade 3) · Time: how many minutes have passed? (word problem) (grade 3) · What time did it start? (grade 3) · Duration: how much longer did one last? (grade 3–4)

Estimating everyday quantities and prices

Your child is learning to estimate an order of magnitude by rounding to the nearest ten, so they can judge whether a price or a result is reasonable.

1 task typesCreate a worksheet →

Description and task types

In CE1 (Grade 2), the child learns to give an approximate value rather than an exact calculation. The curriculum also asks them to estimate the length of everyday objects and the mass of common objects, in grams or kilograms, relying on a few reference masses. In this class, estimation is mainly practised with prices and sums.

The most common mistake is rounding at random: for example, turning 46 into 40 instead of 50, because the child only looks at the units digit or thinks they always have to "take away" something. It also happens that the child works out the exact addition without ever comparing it with an estimate, which does not help them spot an absurd answer.

In the worksheets, this takes the form of tasks such as "Estimate a cost by rounding up", "Estimate the sum: round to the nearest ten", "Estimate the difference: round to the nearest ten", "Estimation: does the result make sense?" or "About how much will we pay in total?" Your child must round the numbers, do the approximate calculation, then say whether the given result is plausible.

Curriculum alignment: Have some reference masses. Estimate the mass of everyday objects in grams or kilograms.
Curriculum alignment: Estimate the length of an everyday object.
Curriculum alignment: Estimate the mass of an object.
Curriculum alignment: Estimate the length of an object or a distance.
Curriculum alignment: Estimate the mass of an object
Curriculum alignment: Estimate the length of an object or a distance

Task types: Estimation: will the result fit · About how much will we pay in total (grade 3) · Estimate the difference: round to the nearest ten (grade 3) · Estimate the sum: round to the nearest ten (grade 3) · Estimating a cost by rounding up (grade 3) · Estimation: find prices that match the estimate (grade 3)

Space and geometry

Locating positions on a grid with a robot

In CE1 (Grade 2), the child learns to follow and describe a movement on a grid, using the words left, right and up, and to count the number of squares travelled.

7 task typesCreate a worksheet →

Description and task types

At this stage, the child can follow a sequence of simple instructions that move a robot on a grid, for example go left or go right, and can say how many squares the robot must cross. They also learn to produce a description of the route themselves, using precise spatial vocabulary, so that locating positions does not depend only on intuition.

The most common mistake is confusing left and right, or counting the starting square as a square travelled. The child then counts one square too many or too few. To help, it is useful to make the gesture with the arm and to count the squares aloud, one by one, pointing to them with a finger.

In the worksheets for this subject, the typical exercise shows a robot on a grid. It may involve choosing the correct result after a move to the left, completing a route, or answering the question "how many squares to the right?" or "how many squares up?". The worksheets also suggest following the robot's complete route by choosing the correct result from several proposals.

Curriculum alignment: Repeat by hand a sequence of instructions to accomplish a prescribed task
Curriculum alignment: Program the construction of a simple path
Curriculum alignment: Build and use representations of a familiar space to locate, remember or communicate a position.
Curriculum alignment: Understand, use and produce a sequence of instructions that encode a movement using precise spatial vocabulary.
Curriculum alignment: Know and use the vocabulary related to movements
Curriculum alignment: Understand, use and produce a sequence of instructions that describe a movement using precise spatial vocabulary
Curriculum alignment: Know and use the vocabulary related to movements
Curriculum alignment: Understand, use and produce a sequence of instructions that describe a movement using precise spatial vocabulary
Curriculum alignment: Build and use representations of the class to locate, memorise and communicate a location.
Curriculum alignment: Moving around and describing movements in the classroom by orienting oneself and using landmarks.
Curriculum alignment: Build and use a plan of the classroom to communicate a movement.
Curriculum alignment: Use and produce a sequence of instructions that encode a movement, using precise spatial vocabulary.

Task types: Grid: how many squares to the right · Grid: how many squares up · Grid: the robot moves left · Grid: the robot moves left: choose the result · Grid: the robot moves right · Grid: the robot's route · Grid: the robot's route: choose the result

Recognizing and naming plane shapes in CE1

The student learns to recognize, name and describe the circle, the square, the rectangle and the triangle, including the right triangle.

6 task typesCreate a worksheet →

Description and task types

In CE1 (Grade 2), the student must recognise, name and describe a circle, a square, a rectangle, a triangle and a right-angled triangle, using the appropriate geometric vocabulary. This skill does not depend on a number domain: it concerns shapes, not numbers.

A common mistake is to rely on the appearance of the figure rather than on its properties. A square placed as a diamond, turned on a corner, often looks like a different shape. Likewise, a square and a rectangle are sometimes confused, even though a square has all its sides of equal length.

In the worksheets, the tasks take the following forms:

  • What is the name of the drawn shape? and What is the name of this rotated shape? to recognise a shape in different positions.
  • What is the name of this shape? Choose to identify the correct answer among several names.
  • Shapes in a drawing: how many triangles? to spot shapes within an arrangement.
  • Plane shapes: true or false? and Plane shapes: correct the name of the shape to check and correct a statement about a shape.

Curriculum alignment: Use appropriate geometric vocabulary.
Curriculum alignment: Recognise, name and describe a circle, a square, a rectangle, a triangle, a right-angled triangle using appropriate vocabulary.
Curriculum alignment: Know the properties of angles and equal lengths for squares and rectangles.
Curriculum alignment: Use the appropriate geometric vocabulary.
Curriculum alignment: Recognise, name and describe the square, the rectangle, the triangle, the right-angled triangle and the rhombus.
Curriculum alignment: Recognise plane shapes (disc, square, rectangle and triangle) in an assembly and in their immediate environment.
Curriculum alignment: Name the circle, the square, the rectangle and the triangle.
Curriculum alignment: Give a first description of the square, the rectangle and the triangle using the terms "vertex" and "side".

Task types: Shapes in a drawing: how many triangles? · Plane shapes: correct the name of the drawn shape · Plane shapes: true or false · What is the drawn figure called · What is this figure called? Choose · What is this turned figure called?

Recognising a right angle and quarter turns

In CE1 (Grade 2), the child learns to recognize a right angle, to check it with a set square, and to relate it to quarter turns.

6 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child mainly works on the right angle, the one found in the corner of a sheet of paper or of a set square. The curriculum asks them to use a set square to check that an angle is right, a ruler to check alignments, and to know the marking that indicates a right angle.

A common mistake is to judge the size of an angle by the length of its sides: we think an angle is bigger because its lines are longer. What matters is the opening between the two sides, which the set square allows us to check.

In practice, worksheets ask, for example, to make a quarter turn to the right with a clock hand, to say whether a half turn is true or false, or to make three quarter turns clockwise. A quarter turn corresponds to a right angle, which serves as a reference point for the child. Some worksheets also ask students to recognise the type of angle. More advanced notions, such as acute, obtuse or complementary angles, belong to parts of the curriculum that go beyond Year 2.

Curriculum alignment: Construct an angle of a given measure
Curriculum alignment: Know and use angles, together with the associated vocabulary and notation: right angle, straight angle, full angle, zero angle, acute angle, obtuse angle, vertically opposite angles, adjacent angles, supplementary angles
Curriculum alignment: Use a ruler to check alignments and a set square to check that an angle is a right angle.
Curriculum alignment: Know and use the code for right angles.
Curriculum alignment: Know and use the notation for a right angle and the notation showing that segments have the same length.
Curriculum alignment: Know the common codes used in geometry
Curriculum alignment: Use the specific vocabulary associated with angles
Curriculum alignment: Understand and use the notations of angles
Curriculum alignment: Compare angles
Curriculum alignment: Know the usual notations and codes used in geometry
Curriculum alignment: Know that a right angle measures 90°
Curriculum alignment: Use the specific vocabulary associated with angles
Curriculum alignment: Understand and use the notations for angles
Curriculum alignment: Compare angles

Task types: A half turn of a clock hand · A half turn of a clock hand: true or false · A quarter turn anticlockwise · A quarter turn clockwise · A quarter turn clockwise: choose the result · A three-quarter turn clockwise · Classify the angle (grade 4–6) · Complementary angles in context: making a right angle (grade 4–6) · Complementary angles: find the other angle (grade 4–6) · Supplementary angles in context: along a straight line (grade 4–6) · Supplementary angles: choose the other angle (grade 4–6) · Supplementary angles: find the other angle (grade 4–6) · Vertical angles: choose the measure (grade 5–7)

Recognize and name common solids

The pupil learns to recognise and name the cube, the cuboid, the sphere, the cone, the pyramid and the cylinder, then to describe their faces.

5 task typesCreate a worksheet →

Description and task types

In CE1 (Grade 2), students learn to recognize common solids: cube, cuboid, sphere, cone, pyramid and cylinder. They can name them and, for the cube, the cuboid and the pyramid, use the words "face", "vertex" and "edge". They also learn to know the number and type of faces of a cube or a cuboid. At this level, these notions require no calculation: it is about observing objects and comparing their shapes.

The most frequent mistake is confusing the cube with the cuboid. Both look like a box, but the faces of a cube are all identical squares, whereas those of a cuboid are rectangles. The student may therefore call "cube" an object that is not one. Another common confusion concerns the cone and the pyramid: the pyramid has a polygonal base and triangular faces, whereas the cone has a round base.

In the worksheets, you will find for example:

  • What is this solid called?: the student gives the name of a solid shown.
  • Which solid is it? Choose: the student chooses the correct answer among several solids.
  • Which solid is it? True or false: the student says whether a statement about a solid is correct.
  • Solids: correct the name of the solid: the student finds and corrects a solid's name that is misspelled or wrongly chosen.
  • Solids: find an object with this shape: the student matches a solid with a everyday object that has the same shape.

Curriculum alignment: Recognise the following common solids: cube, sphere, cone, pyramid, cylinder, cuboid.
Curriculum alignment: Name a cube, a sphere, a cuboid, a cone or a pyramid.
Curriculum alignment: Describe a cube, a cuboid or a pyramid using the terms "face", "vertex" and "edge".
Curriculum alignment: Know the number and nature of the faces of a cube or a rectangular prism.
Curriculum alignment: Name a cube, a sphere, a cuboid, a cone, a pyramid or a cylinder.
Curriculum alignment: Describe a cube, a cuboid or a pyramid using the terms "face", "vertex" and "edge".
Curriculum alignment: Know the number and nature of the faces of a cube or a cuboid.
Curriculum alignment: Know the nature of the faces of a pyramid.
Curriculum alignment: Use the appropriate geometric vocabulary.
Curriculum alignment: Recognize the following common solids: cube, sphere, cone, cylinder, cuboid
Curriculum alignment: Name a cube, a cuboid and a sphere.
Curriculum alignment: Describe a cube or a cuboid using the term "face".
Curriculum alignment: Know the number and the nature of the faces of a cube and of a cuboid.

Task types: What is this solid called · Solids: correct the name of the solid · Solids: find an object shaped like the solid · Which solid is it? Choose · Which solid is it? True or false

Locating oneself relative to other objects

The child learns to locate objects or people in relation to one another, using position vocabulary such as "to the left of", "to the right of" or "between".

4 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child learns to say where an object or a person is located in relation to other reference points, in a space that is familiar to them. The curriculum requires knowing and using the vocabulary of relative positions, and building representations of a space in order to locate or communicate a position.

The most common mistake concerns right and left. A child who can say "the star is on the left" may get it wrong as soon as the point of view changes, for example when they have to describe the position from the opposite side of a row. They then reason from their own place rather than from the chosen reference point.

On the worksheets, this idea takes the form of rows of squares. In the exercise "to the left of the star" or "to the right of the star", the child finds the requested square in relation to a given square. In "how many between", they count the squares located between two reference points, and in the "choose the result" version, they pick the correct answer from several options.

Curriculum alignment: Know and use the vocabulary related to relative positions
Curriculum alignment: Locate people or objects in relation to one another or to other reference points in a familiar space.
Curriculum alignment: Build and use representations of a familiar space to locate, remember or communicate a position.
Curriculum alignment: Know and use the vocabulary related to relative positions.
Curriculum alignment: Locate people or objects in relation to one another or in relation to other reference points in the classroom.
Curriculum alignment: Build and use representations of the class to locate, memorise and communicate a location.

Task types: Row of squares: how many between · Row of squares: how many between: choose the result · Row of squares: left of the star · Row of squares: right of the star

Data organisation and management

Presenting data in a table or a graph

The child learns to organize data collected in a tally chart and to present it as a table or a bar chart.

24 task typesCreate a worksheet →

Description and task types

In CE1, the child learns to present data already collected, for example a class's answers to a question, in a table or a bar chart. The curriculum asks for this kind of presentation. It begins with counting, then arranging the results in a readable way.

The most frequent mistake concerns the pictogram, where one drawing can stand for several objects. The child counts the drawings and forgets to multiply them by the value given in the key. In a tally table, it also happens that the child makes mistakes with the marks (groups of five, forgotten marks) or reads a row by mixing it up with the next one.

In practice, the worksheets offer tasks such as "Table: how many in total?", "Tally table: count the marks", "Tally table: read one row" or even "Tally table: longest row". Others ask the child to compare, with "Tally table: how many more", or to check a total with "Table total: true or false". A child who succeeds at these worksheets can read a simple table and draw information from it.

Curriculum alignment: Construct a simple table to present data (observations, characteristics)
Curriculum alignment: Produce a table or a bar chart to present collected data.
Curriculum alignment: Produce a table or a bar chart to present collected data.
Curriculum alignment: Read and interpret the data in a two-way table or a bar chart.
Curriculum alignment: Collect data and produce a table, a bar chart or a set of points on a coordinate grid to present them
Curriculum alignment: Collect data and produce a table, a bar chart or a set of points on a coordinate plane to present the collected data
Curriculum alignment: Collect data and present this data in the form of a table or a bar chart.
Curriculum alignment: Construct and complete a two-way table.

Task types: Table: how many altogether? · Tally chart – total: find the mistake · Tally chart – two rows together: find the mistake · Tally chart: how many more · Tally chart: how many more: choose the result · Tally chart: read a row · Tally chart: the biggest row · Tally chart: the biggest row: choose the result · Tally chart: total · Tally chart: total: true or false · Tally chart: two rows together · Tally chart: two rows together: true or false · Tally chart – most minus least: find the mistake · Tally chart: four rows altogether · Tally chart: four rows altogether: choose the result · Tally chart: how many marks to add · Tally chart: most minus least · Tally chart: most minus least: true or false · Tally chart: the hidden row · Tally chart: the hidden row: choose the result · Pictogram: one picture stands for several · The missing row when the total is known · Total from a table: choose the correct answer · Total from a table: true or false · Tally chart: count the marks (K – grade 1)

Reading a table or a bar chart

In CE1 (second grade), the child learns to read the data of a bar chart and a two-way table, and then to compare them.

7 task typesCreate a worksheet →

Description and task types

In Grade 2, your child learns to extract numerical data presented in a two-way table or a bar graph, using numbers up to 1,000 as outlined in the curriculum. The goal is to use this information to identify values, spot extremes, and make simple comparisons using addition or subtraction.

The main difficulty often lies in visual tracking: in a table, children frequently confuse rows and columns at their intersection. On a graph, they sometimes struggle to align the top of a bar with its scale mark. In addition, when an instruction asks "how many more", a common mistake is to copy the value of the tallest bar instead of calculating the difference between the two values.

In practice, the exercises require examining the visual to answer concrete questions: finding which category has the most, calculating the difference between the greatest and the smallest, determining how many groups exceed the given number, or evaluating a comparison between two rows as true or false.

Curriculum alignment: Read and interpret the data in a bar chart. Read and interpret the data in a two-way table.
Curriculum alignment: Read and interpret the data in a two-way table or a bar chart.
Curriculum alignment: Solve problems using data from a two-way table or a bar chart.

Task types: Bar chart: how many more · Table: how many more, from the table? · Table: which category has the most? · Difference between two rows: choose the correct answer · Difference between two rows: true or false · Table: how many groups are above the given number? · Table: the gap between the largest and the smallest

Other task types

Finding the missing number in an equation

The child learns to find the missing number in an equation with a gap, by understanding what the signs +, − and = mean.

8 task typesCreate a worksheet →

Description and task types

In Year 2 (CE1), the child understands and uses the symbols "+", "-" and "=". They can find the complement of a number to the next ten, for example how much must be added to 7 to reach 10. The curriculum plans for finding a missing number in a fill-in-the-blank equation in Years 3 and 4 (CM1 and CM2), that is, later in schooling. In CE1, the worksheets work on this idea through simple equations with an empty box.

A possible difficulty to watch for in the child is reading the "=" as an invitation to write a result at the end, rather than as an equality between two quantities. The child may then struggle to see that the box must make both sides equal.

CE1 worksheets include, in particular:

  • Place the sign between a sum and a number to make the equality true.
  • Missing term and missing first term: finding the number that is missing in an addition with a gap.
  • Fill-in equation: true or false: deciding whether an equation with a box is correct.
  • Decompose a number up to 10: choosing or completing the result of a decomposition.

Curriculum alignment: Find the missing number in an equation with a gap
Curriculum alignment: Find the missing number in an equation with a gap
Curriculum alignment: Understand and use the symbols "+", "-" and "=".
Curriculum alignment: Finding the complement of a number to the next ten.

Task types: Number bond: missing part · Put the sign between the sum and the number · A balanced scale: how much does the hidden block weigh · Box in subtraction: what number was taken from? · Equal sides: how many more to add · Equation with a box: missing first addend · Equation with a box: true or false · Equation with a box: fill in both boxes · Break apart a number within 10 (grade 1) · Break apart a number within 10: choose the result (grade 1) · Break apart a number within 10: true or false (grade 1) · Equation with a box: choose the missing number (grade 3) · Missing addend (box equation) (grade 3) · Equation with a box: a sum of three numbers (grade 3)

What a problem looks like

A food cart at the zoo stands by pen 2. It moves forward 3 pens to feed the next animals. Which pen does the food cart reach?

Hint: Find pen 2 first, then count forward 3 pens to see where the food cart stops.

Answer: 5

A pea stick by the greenhouse wall measures 3 meters and 46 centimeters in length. How many centimeters long is the stick?

3 × 100 + 46 = ?

Hint: First change the 3 meters into centimeters, knowing that 1 meter equals 100 centimeters. Then add the extra 46 centimeters to find the total length of the stick.

Answer: 346 cm

The columns of the grid are numbered. A robot stands on the star and moves 3 squares to the left. In which column does it stop? Choose the answer.

□

Answer: a

For tests and lessons

Test in groups A–D

For a test or quiz: print in up to four groups (A–D) — same layout, different numbers and a different order of answer options in each group, one shared answer key.

Create a worksheet in groups →
Adjust problems in the editor

Change numbers, order and wording on a ready-made worksheet.

Try the editor →
Multiple-choice test

The same problems with answer options and an answer card for students.

Create a test →

Review from earlier grades

Topics that do not yet have task types for this grade — the problems come from the grades before.

Counting a collection and writing how many there are

The pupil learns to count a collection of objects by organising them so as to neither forget any nor count any twice, then to write the number of objects.

Create a worksheet →

Description and task types

In Grade 2, students consolidate their ability to count collections by organizing them. Rather than pointing to each item one by one, they learn to identify regular groupings to determine the total quantity of objects more quickly and reliably, before writing down the number found.

The most common mistake occurs when children continue to count one by one across a large collection: they risk missing an item or counting another twice. Another typical confusion is losing track between the complete groups already identified and the remaining individual items.

In practice, in the exercise Count the counters in the frames, the child observes counters arranged in regular structures. This visual presentation helps them rely on complete sets to count the collection efficiently and enter the expected numerical answer.

Curriculum alignment: Counting collections by organising them.
Curriculum alignment: Compare and count collections by organizing them.
Curriculum alignment: Build collections of a given cardinal number.

Task types: Count the counters in the frames (grade 1) · Count the counters: choose the number (grade 1) · Count the counters: true or false (grade 1) · One more (grade 1) · One more: choose the result (grade 1) · One more: true or false (grade 1)

Comparing fractions in CE1

The child learns to say which of two fractions is larger when they have the same denominator, such as 3/8 and 5/8.

Create a worksheet →

Description and task types

In CE1, the child compares fractions that have the same denominator, for example 2/5 and 4/5. The parts are the same size, so the fraction with the larger numerator is the larger one.

A common mistake is to think that the bigger the denominator, the bigger the fraction, because 8 is greater than 5. In reality, the bigger the denominator, the smaller the parts. The CE1 curriculum also asks students to compare fractions whose numerator is 1, such as 1/3 and 1/6.

On a worksheet, there are three types of tasks: "Greater fraction: choose the numerator", where the child keeps the same denominator and chooses the largest numerator; "Fractions with the same denominator: compare", where they place the sign < or > between two fractions; and "Compare fractions with the same denominator: true or false", where they indicate whether a comparison statement is correct.

Comparing fractions less than 1 is part of the CE2 curriculum, and comparing fractions in general is covered in CM1. These topics are not part of CE1.

Curriculum alignment: Compare fractions with the same denominator.
Curriculum alignment: Compare fractions whose numerator is 1.
Curriculum alignment: Compare fractions less than 1.
Curriculum alignment: Comparing fractions

Task types: Comparing fractions with the same denominator: true or false (grade 3) · Fractions with the same denominator: compare (grade 3) · Larger fraction: choose the numerator (grade 3)

Adding and subtracting fractions with the same denominator

In second grade, your child learns to add and subtract fractions that share the same denominator by performing the operation only on the numerators.

Create a worksheet →

Description and task types

In 2nd grade, students encounter their first fractions in Cycle 2. At this level, your child learns exclusively to add and subtract fractions with the same denominator. They work with equal-sized parts and understand that they only need to add or take away parts (the top numbers) without changing the size of the division (the bottom number).

The most common mistake is trying to calculate everything, both top and bottom. When faced with an operation, a child will often instinctively add the denominators as well, writing for example that 1/4 + 2/4 equals 3/8 instead of 3/4. They must understand that the bottom number simply names the part and does not change.

During practice, exercises take the form of calculations guided by the instructions Add fractions with the same denominator and Subtract fractions with the same denominator. The child practices with direct fraction notation to consolidate this essential skill.

Curriculum alignment: Add and subtract fractions with the same denominator.
Curriculum alignment: Add and subtract fractions.
Curriculum alignment: Add and subtract fractions
Curriculum alignment: Adding and subtracting fractions

Task types: Add fractions with like denominators (grade 4–6) · Fractions with like denominators: choose the sum (grade 4–6) · Fractions with like denominators: find the mistake (grade 4–6) · Fractions with like denominators: the missing numerator (grade 4–6) · Fractions with like denominators: true or false (grade 4–6) · Fractions: how much is missing to make a whole? (grade 4–5) · Subtract fractions with like denominators (grade 4–6) · Subtracting fractions: choose the difference (grade 4–6) · Subtracting fractions: find the mistake (grade 4–6) · Subtracting fractions: take away from a whole (grade 4–5) · Subtracting fractions: the missing numerator (grade 4–6) · Subtracting fractions: true or false (grade 4–6) · Fractions with like denominators: a sum greater than 1 (grade 4–6) · Fractions with like denominators: compare the sums (grade 4–6) · Subtracting fractions: compare the differences (grade 4–6) · Fractions: how many pairs make a whole? (grade 4–6)

Column addition and subtraction

Your child is learning to write an addition or subtraction in columns, lining up the units, tens and hundreds one under the other, and then to carry out the calculation column by column.

Create a worksheet →

Description and task types

In CE1, the child sets out and performs column additions and subtractions with three-digit numbers, up to 1000. The CE1 exercises present these calculations in written column form, and no longer only as mental arithmetic.

The most frequent error comes from the layout: the digits are not aligned by place value (units under units, tens under tens). The result is then wrong even when each basic operation is correct. Another common difficulty is forgetting a carry in an addition, or a borrow in a subtraction, because the child treats each column in isolation.

In practice, the worksheets offer for example:

  • Set out and calculate an addition of three-digit numbers, to practise alignment and carrying.
  • Written subtraction up to 1000, to set out and perform a three-digit subtraction.
  • Written addition step by step, to follow each column in order.
  • Written subtraction: correct the error, where the child spots and corrects a mistake already written down, which helps in understanding the method.

Curriculum alignment: Pose and carry out additions and subtractions in columns.
Curriculum alignment: Pose and carry out additions and subtractions in columns.
Curriculum alignment: Write and carry out column additions.

Task types: Add three-digit numbers in columns (grade 3–4) · Three-digit written addition: choose the result (grade 3–4) · Column addition step by step (grade 3–4) · Written subtraction within 1000 (grade 3–4) · Add three numbers in columns (grade 3–4) · Column subtraction: choose the result (grade 3–4) · Column subtraction: correct the mistake (grade 3–4) · Missing addend in column addition (grade 3–4)

Solving two-step problems

The child learns to read a multi-step word problem, to chain two calculations, and to keep the result of the first one for the second.

Create a worksheet →

Description and task types

In CE1, the child solves two-step problems. First come additive problems, where two additions or subtractions must be chained together, then mixed problems, which combine an addition or subtraction step with a multiplication step. The numbers remain those of the year, up to one thousand. The expectations of cycle 2 and cycle 3 go further: this page only describes what belongs to CE1.

The most frequent error is to deal with only part of the statement. The child performs the first calculation and then stops, or answers the question with the intermediate result. Another difficulty comes from the reuse: the child must use the result of the first step as the data for the second, and not the number from the statement.

The worksheets offer several formats. The Two-step problem (combining) template asks to bring quantities together in two stages. The Stock and packs templates ask to find how many packs can be made, or to choose the number of packs to prepare. The Problem, three days templates present a situation spread over several days, with a choice of result or a true or false question to check the method.

Curriculum alignment: Solve problems involving multiplications of decimal numbers
Curriculum alignment: Solve problems involving decimal divisions
Curriculum alignment: Solve problems involving Euclidean divisions
Curriculum alignment: Solve problems involving fractions
Curriculum alignment: Solve two-step additive problems.
Curriculum alignment: Solve two-step mixed problems (one additive step and one multiplicative step).
Curriculum alignment: Solve two-step additive problems.
Curriculum alignment: Solve mixed problems in two or three steps.
Curriculum alignment: Solve one-step additive problems of the "part-whole" and "comparison" types
Curriculum alignment: Solve additive problems in two or three steps
Curriculum alignment: Solve multiplicative part-whole problems in one step
Curriculum alignment: Solve mixed problems in two or three steps
Curriculum alignment: Solve optimization problems
Curriculum alignment: Solve additive problems in one or more steps
Curriculum alignment: Solve one-step multiplicative problems of the "part-whole" type
Curriculum alignment: Solve mixed multi-step problems
Curriculum alignment: Solve optimization problems
Curriculum alignment: Solve two-step additive problems (number field less than or equal to 30).

Task types: Two-step word problem (combine) (grade 3) · Word problem, three days: choose the result (grade 3) · Word problem, three days: true or false (grade 3) · Stock and sets: choose the number of sets (grade 4–6) · Stock and sets: the most sets you can make (grade 4–6)

The kilometre: measuring long distances

The child learns to use the kilometre with the metre, to know that one kilometre equals one thousand metres, and to convert kilometres into metres.

Create a worksheet →

Description and task types

At CE1 (Grade 2), the child learns to know and use the units metre, centimetre and kilometre, as well as their symbols m, cm and km. For the kilometre, the work focuses on distances in whole kilometres and on the link between kilometres and metres: one kilometre equals one thousand metres.

The most common mistake is confusing the units, for example writing 3 km = 300 m, as if one multiplied by one hundred. A child may also forget that a kilometre is much larger than a metre and give an answer without realising that it is too small. The most useful approach is to bring it back to meaning: 1 km is one thousand times 1 m.

In the worksheets in this section, the kilometre appears mainly in the following tasks:

  • Convert kilometres and metres into metres: change a distance given in kilometres and metres into a number of metres.
  • Kilometres into metres: choose the correct answer and true or false: compare a proposed conversion with the correct one.
  • Kilometres: how many whole kilometres? and how much is missing to make one kilometre?: count whole kilometres and complete up to one kilometre (1,000 m).

Curriculum alignment: Know and use the units metre, centimetre, kilometre and their associated symbols (m, cm and km).
Curriculum alignment: Know and use the units metre, decimetre, centimetre, millimetre, kilometre and their associated symbols (m, dm, cm, mm, km).

Task types: Converting kilometres and metres to metres (grade 3) · Kilometres to metres: choose the correct answer (grade 3) · Kilometres to metres: true or false (grade 3) · Kilometres: how many whole kilometres? (grade 3–4) · Kilometres: how much is missing to a full one? (grade 3–4)

Metres and centimetres: two ways of writing a length

Measuring and comparing lengths with metres and centimetres

Create a worksheet →

Description and task types

In CE1, the child learns that the same length can be written in two ways, for example 2 m 5 cm and 205 cm. The relationship 1 m = 100 cm, introduced as early as CP, serves as a reference point for moving from one written form to the other. The numbers stay within the hundreds, with lengths of a few metres.

The most common mistake is to treat the "metres" part and the "centimetres" part as a decimal number. The child then reads 2 m 5 cm as 2.5 m, that is two and a half metres, when it actually means two metres and five centimetres. They may also add the metres together and the centimetres together without thinking about carrying over when the centimetres exceed 100.

In CE1 worksheets, four main types of exercises are found: adding lengths written in different ways, choosing the result from two written forms of the same length, saying whether two written forms are true or false together, and calculating by how much one length exceeds the other. There are also exercises for counting how many whole metres a length contains. More advanced conversions between units are part of work that continues in CE2 and in cycle 3.

Curriculum alignment: Know the relationships between common units of length.
Curriculum alignment: Know the relationships between units of length.
Curriculum alignment: Compare lengths.
Curriculum alignment: Knowing that one metre is equal to one hundred centimetres.

Task types: Adding lengths written in different notations (grade 3) · Lengths in two notations: choose the result (grade 3) · Metres: how many whole metres? (grade 3–4) · Two length notations together: true or false (grade 3) · Lengths in two notations: how much longer is one? (grade 3–4)

Parallel and Perpendicular Lines in Grade 2

In CE1 (second grade), the child learns to recognize the notation for a right angle and to identify whether two lines or segments are parallel or perpendicular.

Create a worksheet →

Description and task types

In CE1, the child learns to recognise the right-angle marking, the small square drawn in a corner, and to use it to identify perpendicular segments. The curriculum explicitly mentions this marking at this level. The notions of parallelism and perpendicularity appear in curriculum points that go up to CM2, so beyond what CE1 aims for.

The most common mistake is to judge by eye: a segment that looks "flat" or "upright" is declared perpendicular without checking for the small square, or two segments slanted in the same way are judged parallel without looking at the regularity of the grid. The child must get into the habit of looking for the marking rather than relying on visual impression.

In the worksheets in this section, the notion appears in the following exercise models: Parallèles ou perpendiculaires ?, which asks to sort pairs of lines, and exercises on droites parallèles such as Droites parallèles : distance, Droites parallèles : choisis la distance, Distance de droites parallèles : vrai ou faux and Distance de droites parallèles : trouve l'erreur. These worksheets are used to practise recognising the situation; they do not require drawing or calculation techniques beyond what is printed.

Curriculum alignment: Know and use the code for right angles.
Curriculum alignment: Know and use the notation for a right angle and the notation showing that segments have the same length.
Curriculum alignment: Know the common codes used in geometry
Curriculum alignment: Recognise and use the notion of perpendicularity
Curriculum alignment: Recognise and use the notion of parallelism
Curriculum alignment: Know the usual notations and codes used in geometry
Curriculum alignment: Recognise and use the notion of perpendicularity
Curriculum alignment: Recognise and use the concept of parallelism

Task types: Distance of parallel lines: find the mistake (grade 6–7) · Distance of parallel lines: true or false (grade 6–7) · Parallel lines: choose the distance (grade 6–7) · Parallel lines: distance (grade 6–7) · Parallel or perpendicular? (grade 4–6)

More about this grade

What does a child learn in CE1 in mathematics?

In CE1, the child works with numbers up to one thousand, units, tens, and hundreds. Fractions are introduced from the very first term (one half, one third, one quarter...), along with the words “numerator” and “denominator”. They set up additions and subtractions in columns, understand the × sign and commutativity, learn multiplication tables, and solve comparison and two-step problems. They measure in m, cm, and km, weigh in g and kg, count in euros and cents, tell time to the quarter hour, and calculate durations in hours and minutes.

About the curriculum: the mathematics curriculum sets the learning objectives for each year of Cycle 2 (CP, CE1, CE2) and Cycle 3 (CM1, CM2, 6e), so that the end-of-year expectations are met. Each concept below therefore appears in the year specified by the curriculum itself. The complete list of objectives for this year, quoted word for word, can be found in the section below.

Curriculum alignment

Each row is a standard of the curriculum, worded as in the official source linked below, with our topics for it.

StandardOur topics
Numbers, calculation and problem solving
Counting collections by organising them. Counting a collection and writing how many there are · Value of digits according to their position (up to 1,000)
Build collections of a given cardinal number. Value of digits according to their position (up to 1,000)
Know and use the relationship between units and tens, between tens and hundreds, between units and hundreds. Value of digits according to their position (up to 1,000)
Know the written and spoken sequence of numbers up to one thousand. Reading and writing numbers up to 1000 · Counting by n, forwards and backwards
Know and use various representations of a number and move from one to another. Value of digits according to their position (up to 1,000) · Reading and writing numbers up to 1000
Know the value of digits according to their position in a number. Value of digits according to their position (up to 1,000)
Compare, bound and insert whole numbers using the symbols (=, <, >). Comparing and ordering numbers up to 1000
Order numbers in ascending or descending order. Comparing and ordering numbers up to 1000
Understand and be able to use the expressions "equal to", "greater than", "less than", "between … and …". Comparing and ordering numbers up to 1000
Knowing how to place numbers on a graduated half-line. Placing numbers on a number line
Know ordinal numbers up to one hundred. Ordinal numbers: first, second, rank
Understand and use ordinal numbers. Ordinal numbers: first, second, rank
Identify a rank or a position in an ordered line or in a list of objects or people. Ordinal numbers: first, second, rank
Relate the position of an object in a list to the number of elements that precede it. Ordinal numbers: first, second, rank
Use ordinal numbers in the context of a sequence of symbols, letters or numbers. Ordinal numbers: first, second, rank · Spotting and extending a pattern
Know how to interpret, represent, write and read the fractions 1/2, 1/3, 1/4, 1/5, 1/6, 1/8 and 1/10. Halves and quarters: sharing into equal parts · Learning simple fractions in CE1
Know how to interpret, represent, write and read fractions less than or equal to 1. Learning simple fractions in CE1 · Halves and quarters: sharing into equal parts
To know and use the words “denominator” and “numerator”. Learning simple fractions in CE1
Compare fractions with the same denominator. Comparing fractions in CE1
Compare fractions whose numerator is 1. Comparing fractions in CE1
Add and subtract fractions with the same denominator. Adding and subtracting fractions with the same denominator
Pose and carry out additions and subtractions in columns. Column addition and subtraction
Understand and use the symbol "×". Multiplication tables up to 100: what children learn in CE1
Understand and know that multiplication is commutative. Order of numbers: what does not change
Know the concept of the parity of a number. Even numbers: two equal parts
Know the addition tables in both directions. Adding up to 20 without crossing the tens · Subtracting up to 100 in CE1
Know the multiplication tables in both directions. Multiplication tables up to 100: what children learn in CE1 · Dividing using the multiplication table
Know common multiplication facts. Multiplication tables up to 100: what children learn in CE1
Add or subtract a whole number of tens to a number. Add or subtract a whole number of hundreds to a number. Adding and subtracting tens and hundreds
Multiply a number less than 100 by 10. Multiplying numbers up to 20 by 10
Add 9, 19 or 29 to a number. Adding up to 100 with carrying
Subtract 9 from a number. Subtracting up to 100 in CE1
Subtract a number less than 9 from a number. Subtracting up to 100 in CE1
Determine half of an even number. Dividing using the multiplication table
Calculate the product of a number between 11 and 19 and a number less than 10 by decomposing the larger of the two factors into the sum of two numbers (distributivity property of multiplication over addition). Order of numbers: what does not change · Multiplication tables up to 100: what children learn in CE1
Solve one-step additive problems of the part-whole type. Solving simple one-step problems · Adding numbers up to 100
Solve one-step additive comparison problems. Solving problems with “how many more”
Solve two-step additive problems. Solving two-step problems
Solve one-step multiplicative problems. Solving simple one-step problems · Multiplication tables up to 100: what children learn in CE1
Solve two-step mixed problems (one additive step and one multiplicative step). Solving two-step problems
Quantities and measures
Know and use the units metre, centimetre, kilometre and their associated symbols (m, cm and km). Measuring and converting in m, cm, and mm · The kilometre: measuring long distances
Choose the most suitable unit for expressing a length. Measuring and converting in m, cm, and mm
Know the relationships between common units of length. Metres and centimetres: two ways of writing a length
Know how to measure the length of a line segment using a graduated ruler. Drawing line segments and polylines with a ruler
Compare lengths. Comparing lengths and masses
Know some reference lengths.
Estimate the length of an everyday object. Estimating everyday quantities and prices
Be able to identify the lightest (or heaviest) object among two or three objects of similar volumes by hefting them or using a balance to weigh them.
Know and use the units gram and kilogram and the associated symbols (g, kg). Weighing with grams and kilograms
Know that 1 kg is equal to 1 000 g. Weighing with grams and kilograms
Compare masses. Weighing with grams and kilograms · Comparing lengths and masses
Have some reference masses. Estimate the mass of everyday objects in grams or kilograms. Estimating everyday quantities and prices
Know the relationship between euros and cents. Calculating with money in CE1
Compare the euro values of two sets made up of coins and banknotes. Calculating with money in CE1
Determine the value in euros and cents of a set made up of coins and banknotes. Calculating with money in CE1
Make up a given sum of money using euros and cents of a euro. Calculating with money in CE1
Simulate purchases by handling play coins and banknotes. Give change. Calculating with money in CE1
Know the meaning of decimal notation for a sum of money. Calculating with money in CE1
Read the time on an analogue clock (when the time is given in whole hours, in hours and half hours, or in hours and quarter hours). Reading the time on an analog clock
Set the hands of a clock to show a given time in whole hours, in hours and half hours, or in hours and quarter hours. Reading the time on an analog clock
Know, use and distinguish the hours of the morning and those of the afternoon. Reading the time on an analog clock
Know the units of measurement of duration, hour and minute, and the associated symbols (h and min). Calculating a duration on a clock
Compare and measure elapsed durations between two instants displayed on a clock (for time intervals within the same day, with times given in whole hours, in hours and half-hours, or in hours and quarter-hours). Calculating a duration on a clock
Space and geometry
Recognise the following common solids: cube, sphere, cone, pyramid, cylinder, cuboid. Recognize and name common solids
Name a cube, a sphere, a cuboid, a cone or a pyramid. Recognize and name common solids
Describe a cube, a cuboid or a pyramid using the terms "face", "vertex" and "edge". Recognize and name common solids
Know the number and nature of the faces of a cube or a rectangular prism. Recognize and name common solids
Construct a cube, a cuboid or a pyramid.
Use appropriate geometric vocabulary. Recognizing and naming plane shapes in CE1
Recognise, name and describe a circle, a square, a rectangle, a triangle, a right-angled triangle using appropriate vocabulary. Recognizing and naming plane shapes in CE1
Know the properties of angles and equal lengths for squares and rectangles. Recognizing and naming plane shapes in CE1
Reproduce or construct a square, a rectangle, a triangle, a right triangle and a circle, or an assembly of these figures.
Use a ruler to check alignments and a set square to check that an angle is a right angle. Recognising a right angle and quarter turns
Use the graduated ruler, the set square and the compass as drawing instruments.
Know and use the code for right angles. Recognising a right angle and quarter turns · Parallel and Perpendicular Lines in Grade 2
Know and use the vocabulary related to relative positions Locating oneself relative to other objects
Locate people or objects in relation to one another or to other reference points in a familiar space. Locating oneself relative to other objects
Build and use representations of a familiar space to locate, remember or communicate a position. Locating positions on a grid with a robot · Locating oneself relative to other objects
Construct assemblies of cubes and cuboids.
Understand, use and produce a sequence of instructions that encode a movement using precise spatial vocabulary. Locating positions on a grid with a robot
Data organisation and management
Produce a table or a bar chart to present collected data. Presenting data in a table or a graph
Read and interpret the data in a bar chart. Read and interpret the data in a two-way table. Reading a table or a bar chart

Outside the curriculum — extra tasks

Tasks that this grade's curriculum does not include, but other countries teach at this level. Free, like everything here, and never mixed into the topics or the ready-made tests of the curriculum.